my new vape mod says no atomizer found...what do i do

Why does my vape MoD say No atomizer?

The no atomizer message appears when your vape mod is unable to read the resistance level of your coil. ·The tank is not screwed inadequately. If you don’t fully screw in your tank, the 510 connectors on your mod and tank will not make contact.

How do I fix the “No atomizer” message?

To loosen it, you'll need to use a screwdriver to gently press down on the connector (since most of the connectors are spring-loaded, this should loosen it). This should fix the problem, but if not, it's time to check the coil. Sometimes the reason you see the “No Atomizer” message is because there is a problem with the coil.

How to fix Smok vape kit can’t vape?

You can change your atomizer to another vape mod for testing. If the atomizer works properly, then it is possible that the 510 connector/vape mod hardware is damaged. Please contact the corresponding manufacturer for after-sales service. SMOK Vape Kit Can’t Vape – How to Do?

Is your vape mod not reading the coil properly?

It will inevitably happen at some point and it is usually an extremely easy fix. If you press the firing button on your e-cig and you see the message ‘no atomizer’ or ‘check atomizer’ it means that your vape mod is not reading the coil within your vape tank properly.

Why does my brand new vape say no atomizer?

“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.

How do I reset my vape atomizer?

0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.

How do I fix my atomizer connection?

0:183:13Puffco Peak Atomizer fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've got a single q-tip. I'm going to show you guys what to do when your atomizer breaks up closeMoreWe've got a single q-tip. I'm going to show you guys what to do when your atomizer breaks up close remember you can also use a recharge or rebuild kit for this.

What is no atomizer in vape?

When you get the “No atomizer” or “Check atomizer” message, it means your mod doesn't think your tank – or more specifically, your coil or atomizer head – is attached to the connection point. You'll see the same message when you try to fire a mod without anything attached.

How do you reset a vape mod?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.

Where is the atomizer located in a vape?

Housed within the vape tank, an atomizer head contains a coil of thin wire and wicking material. We will go into the finer details a little bit later, but the atomizer creates vapour.

What is an atomizer on a vape mod?

What Is an Atomizer? The atomizer is the component of your vaping device that's responsible for generating the vapor you inhale. Whether you use a vape tank, a rebuildable atomizer or a vape pod, the purpose of the atomizer is the same.

How do you check a vape atomizer?

0:383:22How To Fix 'Check Atomizer' - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes juice likes to sit in the 510 of the device. So make sure you give this a clean also ifMoreSometimes juice likes to sit in the 510 of the device. So make sure you give this a clean also if there is juice or dirt inside the 510. Then your device may not be able to read your tank or RDA.

How do I fix my vape atomizer short?

Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•

How do you fix a vape that won't smoke?

Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.

Why is my vape on but not working?

If you're using your vape pen's battery correctly but it's not working, inspect the battery's contact point for damage or residue, like excess oil. If it seems clogged, clean it with rubbing alcohol and let it dry before reconnecting it to the cart.

Why is my vape flashing and not working?

The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.

Why is my atomizer saying no?

Check Your Coil. Sometimes the reason you see the “No Atomizer” message is because there is a problem with the coil. To check the coil for issues, you’ll first want to clean it. To do this, you’ll have to take the tank apart as if you were changing the coil.

What does it mean when you change your tank with a new one?

If you change the old tank with a new one, the message disappears from your mod, which could mean that your old tank is the problem. If the message still appears with a new tank, it could mean that your mod is the problem.

Why is my vape not recognizing my atomizer?

If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.

How to tell if a vape is malfunctioning?

One easy way to know if your atomizer is malfunctioning is if your vape displays one of the following messages: check atomizer, no atomizer, or no atomizer found. If your vape shows one of these no atomizer messages, continue reading to find out how to proceed.

What is a vaporizer?

A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.

How to prevent vaping issues?

Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.

What tool to use to adjust vape pins?

However, if your vape isn’t one of these models, use a small tool, like a precision flathead screwdriver, to adjust the pin position ever-so-slightly.

How long does it take to read a vaporizer?

Reading Time: 4 minutes . Your vaporizer is a lot like your car: you count on it on a daily basis, it’s a critical part of your everyday routine, and you hope to avoid issues at all costs. However, just like a vehicle, vaporizers do run into mechanical problems every now and then.

What is the pin on a vape?

The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.

What does it mean when an e-cigarette says no atomizer?

An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.

How to get vape juice out of a tank?

Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.

What does it mean when your tank is sat flush with a rubber o-ring?

If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.

How to get a tank to pop back into the correct position?

Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.

Can a mod make a complete connection to a vape tank?

Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.

How to fix atomizer error?

To fix it, you will probably have to reseat the coil. Take apart the tank, unscrew the coil from the tank base and clean the bottom of the coil (at the place where it connects with the tank). Clean the contact as well. After you reassemble the tank, the error message “Check Atomizer” or “No Atomizer Found” should disappear.

How to fix a 510 pin on a tank?

Possibly, you will fix it quickly. Unscrew the base of the tank and find the plate inside the bottom section of the tank. Reveal the 510 pin by pushing that plate from inside. The 510 pin should be sticking from the bottom of the tank. If it doesn’t work, try turning the plate to screw it back.

What is the guide to vaping?

Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.

Why is my earbuds stuck?

You could have accidentally dropped your device, one of the two pins inside the connection area can be stuck due to dirt or grime, or you could have a coil that isn’t functioning properly.