Here are the steps: 1. Press the button rapidly 5 times 2. Notice the light on the button flashing 3. The battery is now activated, you can push and hold the button as you're inhale your vape.
How to use a vape pen?
Fill the syringe with the vape juice of your choice. Unscrew the vape pen’s mouthpiece. This exposes an opening in the cartridge. Use the syringe to inject the juice into the opening.
Are aspire vape pens any good?
Aspire have some of the best vape pens that have attracted both newbies and advanced vape users. Aspire has its origins in China and has been operating since 2013. If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV recommendations.
How do I charge my vape pen?
Most charge using a standard USB connector. An indicator light will indicate when the battery has ample juice. A full charge takes only an hour or two. If you have a disposable cartridge, remove the rubber top and screw it onto the vape pen.
Should you buy a vape pen with an activation button?
The advantage of activation buttons is that they offer more control over temperature. Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit.
How do you use the Aspire vape?
0:221:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace. Simple.
How do you know when aspire PockeX is fully charged?
Using the included cable, charge via a USB port. The light at the bottom will turn red to indicate it's charging and will turn green once it's fully charged.
How do you set up Aspire?
1:406:24Setting up new Laptop Aspire Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo once the power is in everything is plugged in this is the power button right here. There you goMoreSo once the power is in everything is plugged in this is the power button right here. There you go and hear the sound. Just came up as there.
How do I change the settings on my Aspire vape?
2:395:48Aspire Zelos 50w Kit - Overview & User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the 1.8 own call fitted between nine and ten watts is a good starting point press both the fireMoreWith the 1.8 own call fitted between nine and ten watts is a good starting point press both the fire button and plus button simultaneously to lock the values or power settings from being altered.
Why does my Aspire PockeX keep flashing blue?
While the device is on, the LED light will indicate the PockeX's charge level, when the battery charge is above 30%, the light will be blue; When the battery charge is less than 30%, the LED light around the fire button will be pink.
How long should I charge my Aspire PockeX?
How long does the Aspire PockeX AIO battery take to charge? If you are charging it for the maiden time, it will take 4 hours to get the 1500mAh battery up to full charge. However, the rest of the charges won't take that long.
How do I fill my Aspire vape tank?
0:132:52How to fill an aspire tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou take a couple of drops take the top off the bottle you're going to take a couple of drops. AndMoreYou take a couple of drops take the top off the bottle you're going to take a couple of drops. And drop two drops into the reservoir so that's going to sit there for a minute. And steep.
How do you prime an Aspire PockeX coil?
0:593:04Aspire PockeX Setup Video by Vapouroxide - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo before we get into running up you're going to want to prime it. So get your juice bottle open.MoreSo before we get into running up you're going to want to prime it. So get your juice bottle open. And if you notice at the top of these coils.
Why is my Aspire PockeX spitting?
Why is my PockeX spitting hot liquid in my mouth? - Usually, this is due to the coil heating the e-liquid but not quite vaporising it and the hot liquid reaching the mouth. This excess liquid causes the device to flood, which disrupts the flow of vapour.
Why is there no smoke when I vape?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
What are the different vape modes?
What Are the Different Vaping Modes and What Do They Mean?Variable Wattage and Variable Voltage Mode. When you turn a vape mod on for the first time, it'll probably start in variable wattage mode. ... Temperature Control Mode. ... Wattage Curve Mode. ... Bypass Mode. ... Smart Vaping Mode.
Why is my vape not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
Build and design quality
The Aspire PockeX is a small vape mod that seems to be slightly shorter than an average smartphone. The device is simple to use and will win the hearts of people after a ruthless mod. With its small size, it comes at 86 grams, and it is very pleasant to handle and use. Its build is excellent and does not come off as stressful to use.
How to use the Aspire PockeX
The device is ready to use once the tank is filled and charged. To turn on the device, press the fire button five times consecutively and repeat this process if you want to turn it off. The indicator light flashes three times to show you that it is the moment to vape.
Aspire PockeX vs. Vision Spinner 2
For a starter, the Vision Spinner 2 is a good unit to start with. It has a sleek and stylish look which is similar to other mid-sized batteries. It has a convenient and easy-to-use voltage dial, an advanced PCB circuit, and a long battery. You can use this device with any tank of your choice.
Flavor and vapor quality
The Aspire PockeX coils create a good combination of stainless steel wires and organic cotton. The U-tech coils have a good way of diverting airflow to allow for the recycling of the drawn air twice through the coil for an unparalleled flavor and huge clouds of vapor. You have the option of choosing between two coils.
Battery and charging of the Aspire PockeX
The Aspire PockeX comes with a 1500mAh battery that has a bypass output. You are allowed a 30-day warranty on the battery from the day of purchase. The battery level indicator is found on the button and it can change its color concerning how much battery percentage you have left.
Performance of the Aspire PockeX
Filling this device for use is not an easy task. You only have to unscrew the top cap and pour in your 2ml of e-liquid into the tank. Use the max line to guide you on how much you need to vape to avoid chances of leakages and spitting issues.
FAQs about Aspire PockeX
The Aspire PockeX is a good all-in-one device that should not be overlooked. It delivers the best vapor and performance with so little maintenance needed, all you have to do is keep it working well and you will be good.
How long does it take to learn to use a vape pen?
It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one.
How many times does a vape pen battery turn on?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
What to do when your vape is not in use?
Tips for When Your Vape is Not in Use. Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.
What is a dab atomizer?
Dab - The mode meant for vaping cannabis extracts with a 510-thread wax atomizer, and is indicated with blue lights. It can also be used with THC cartridges that can take this voltage setting. But do not use this setting with any vape cartridge unless you're certain it's capable of vaping at this voltage.
What is the dab mode on a vape?
The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale. The first three settings are perfect for those who want to vape without having to press a button, and will vape THC cartridges by simply inhaling.
How long does it take for a vape puff to stop heating?
This means the pen will stop heating the cartridge after a certain amount of time. Most pens will have this occur around 8-seconds.
Can you vape with a 510 atomizer?
The O.pen has evolved into the 2.0 version with multiple temperature settings, including a dab mode. So, you can enjoy vaping your favorite cannabis extracts with your choice of 510-thread wax atomizer. There are many aspects to consider when purchasing a vape pen battery.
What temperature do you set a vape pen to?
He also notes that most vape pens use a slightly higher 210 degrees Celsius as a set point. According to one Netherlands study, an e-cig setting of degrees Celsius yielded better cannabinoid concentrations at 77 percent, compared to just 24 percent when the temperature was set at 170degrees Celsius.
How long does it take for a vape pen to charge?
A full charge takes only an hour or two. If you have a disposable cartridge, remove the rubber top and screw it onto the vape pen. If you have a buttonless model, the device will automatically turn on when you take the first inhale through the mouthpiece.
How to refill a vape cartridge?
How to Refill a Vape Pen Cartridge 1 We recommend using a syringe with a blunt needle tip, which you can acquire inexpensively at your local pharmacy store. 2 Fill the syringe with the vape juice of your choice. 3 Unscrew the vape pen’s mouthpiece. This exposes an opening in the cartridge. 4 Use the syringe to inject the juice into the opening. 5 Screw the mouthpiece back on.
What are the parts of a vape pen?
First, let’s get acquainted with a vape pen and the individual parts that make up the unit. The typical vape pen consists of these components: Battery: The power system consists of a rechargeable lithium-ion battery like that in your mobile phone.
Where is the atomizer located?
Atomizer: This is located between the battery and the mouthpiece ; it’s the component that heats the oil into vapor. The atomizer is also referred to as a cartomizer or clearomizer. Tank/cartridge: This takes the form of a single-use disposable cartridge pre-filled with CBD oil.
Can a vape pen leach metal?
There have been some recent concerns that vape pens leach toxic heavy metals that the user ultimately and unknowingly inhales. One 2016 study suggests e-cig users are at risk of exposure to the metals nickel and chromium. It’s believed that metal leaches from the heating coil and mixes with the vapor.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
How to use a vape pen for wax?
With this device, you have to prepare them and pack them properly. Use a dab tool and get a small “dab” of wax, much like the size of rice. Place it into the chamber, which on top of the heating element (coil). Finally, screw the mouthpiece back onto the wax pen.
How does a dab pen work?
A dab pen has a heating chamber and you’ll load the wax or other concentrate directly into the heating chamber to be vaporized. Vape Pen For Wax Instructions: Wax pens require a little more knowledge than others.
What is a cbd pen?
A pen for CBD is identical to a vape pen for e-liquid. Both liquids have the same consistency, often use the same ingredients, minus the nicotine, and work in the same way. Like the above, there is a shell, a battery, and an attached heating element that is used in a tank or cartridge. You can pour the CBD vape juice (also known as CBD e-liquid ) into the tank.
Is a cbd pen the same as a vape pen?
CBD. A pen for CBD is identical to a vape pen for e-liquid. Both liquids have the same consistency, often use the same ingredients, minus the nicotine, and work in the same way. Like the above, there is a shell, a battery, and an attached heating element that is used in a tank or cartridge.
Can you vape regular nicotine?
Vape pens for e-liquid (or ejuice) allow you to vape regular nicotine e-liquid, nicotine-free e-liquid, and salt nicotine e-liquid with the correct heating element. Vape Pen For E-Liquid Instructions: Using a vape pen is fairly simple. If you have a replaceable coil, make sure that you pre-soak (prime) your coil, install it, ...
Can you vape oil with a pen?
Vape Pen For Oils Instructions: Using a vape pen for oils is easy and very similar to e-juice and CBD, since an oil concentrate is more of a liquid substance. Often times these oils are pre-filled in tanks or cartridges, though you can refill them through the refill hole is one is available.
How to vape Aspire AVP?
How To Vape The Aspire AVP: While the device is turned on, simply take a draw (inhale) from the mouthpiece and the AVP will automatically detect that you’re using it. It will immediately auto fire so that you never have to press a button to vape.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
How to secure a lanyard to a pod?
On the side of the device, there is an eyelet where you can insert a part of the lanyard through. Secure the lanyard to the edge of the device by making a loop and attaching the end of the loop over the hook/peg next to the eyelet. Next, pull the lanyard to tighten. Then insert the pod to continue use. Advertisement.
How to fill a pod with liquid?
How To Fill The Pod With E-Liquid: First remove the pod from the body/housing of the device. Turn the pod upside down and locate the filling hole. Pour e-liquid into the pod until filled. Flip the pod back to its upright position and place it back into the body.
Is AVP easy to use?
While the AVP (Aspire Vape Pod) is very easy to use and operate, there are users that are unfamiliar with vaping devices or experience an issue while using it. Hopefully, by sharing this information, you will be able to properly use the Aspire AVP or fix an issue you may be having with the device.
How does a vape pen work?
Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced . That vapor is then inhaled through the mouthpiece. Yes, it’s really that simple.
What is the part of a vape pen that draws vapor?
Mouthpiece: This is the part that you draw the vapor from and attaches to the heating chamber. Charger: Separate from the pen itself, this is usually a micro USB and is used to charge your vape battery. Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced.
How many clicks to turn on a vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit. The button settings on a vape pen can also be a disadvantage.
What is the main part of a vape pen?
Most vape pens have the same parts, though some will differ slightly. Battery: This is what powers the device and usually the longest part of the pen. Heating chamber / atomizer: This is where your concentrated cannabis oil, wax, or dry herbs are placed to be heated until they produce a vapor. Attaches to the battery.
What is a single use vape pen?
These single-use pens are generally smaller and even more discreet than their reusable counterparts. Disposable vape pens generally one-piece units, with no removable battery, no refillable heating chamber, and no button (auto draw). Once the oil/concentrate supply is depleted, you can simply discard it.
What is an auto draw on a vape pen?
Vape pen users have their preferences when it comes to models with activation buttons or “auto draw” (meaning they’re activated simply by inhaling on the mouthpiece). The advantage of activation buttons is that they offer more control over temperature.
What are the benefits of using a vape pen?
There is no combustion, flame, or ash involved in vaporizing. This is both cleaner and better for health. Less odor. Because smoke is removed from the process, less odor is produced, and it dissipates more quickly than smoke. More discreet.
How To Refill The Aspire Atlantis Tank Properly
Like most BIG BOY tanks, the Aspire Atlantis unscrews from the bottom in a counter clock-wise direction. Be warned, though, it is rather tough to get off the first time, so a little force is necessary. Once you’ve unscrewed the bottom portion of the device, set it aside and follow these steps to the letter:
Using The Aspire Atlantis With The Right Box-Mod
This is a sub-ohm tank and it works best when clocked between 35W and 40W, so you’re going to need a decent box mod to get the best vapor experience out of the Aspire Atlantis.
Extra Tips & Tricks For Getting The Most Out Of The Aspire Atlantis
I love Reddit, so much so I even did a post on the Best Vaping SubReddits on Reddit.
