Prime the coil before vaping, add a few drops of e-liquid to the wick at the ports around the side first, wait several minutes, then fill the tank and wait for at least 15 minutes. When You Do the Filling: Make sure coil bottom capes are clamped all the way down and make sure air holes are closed when refilling.
Does my innokin vaporizer have a manual on/off switch?
Rarely, your Innokin vaporizer may include a manual on/off switch in addition to the typical 3 presses of the firing button. You’ll find switches like this on products such as the CoolFire IV and CoolFire Z50.
What coils come with my innokin adept e-cig starter kit?
Your Innokin Adept e-cig starter kit comes with two coils. A 0.48 ohm coil comes preinstalled in the Zlide tank. You can use that coil or you can swap it out for the 1.6 ohm coil that also comes with kit or you can opt for the 1.2 ohm coil we sell separately. What's the difference between the coils?
How do I install the innokin adept?
The Innokin Adept is made up of three components: the main body that holds the battery, the Zlide tank and the drip tip. Assembly is easy. Affix the drip tip to the top of the Zlide tank and screw the tank into the body of the battery. You're good to go! Like most e-cig models these days, the Innokin Adept comes with an on/off feature.
How do I know the wattage of my innokin adept coil?
However, if you want to know a little more about wattage, turn your Innokin Adept upside down and look at the bottom of the base: When you install a coil, the Innokin Adept will automatically detect the ohms rating of the coil.
How do you properly fill a vape?
0:202:03How to Fill Vape Tanks - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply twist the top insert. The tip of your liquor bottle into the hole and squeeze.MoreSimply twist the top insert. The tip of your liquor bottle into the hole and squeeze.
How do you fill a disposable vape?
How To Refill Your Disposable E-CigaretteStep One: Open The Vape Pen. You'll need to unscrew the e-cig mouthpiece for this initial step by twisting it off. ... Step Two: Fill the Cartridge With Oil. Use a syringe, if possible, to fill the cartridge with oil. ... Step Three: Screw The Mouthpiece Back In Place.
How do you use innokin?
After you've charged the battery and filled the tank, it's time to start vaping with the Innokin Go S. Press the fire button five times quickly to turn the device on. To vape, puff on the tank's mouthpiece while holding the fire button. To adjust the tank's airflow, rotate the collar on the bottom of the tank.
How do you refill innokin EQ?
The EQs mod comes with refillable pod cartridges. Take the cartridge pod and locate the fill port, then twist the base to reveal double fill ports. Next, take your e-juice bottle, point the nozzle to the fill port, and load up your e-liquid of choice up to the maximum fill line indicated.
How do I open my vape tank?
0:000:58How To: Open a Tight Vape Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipI had a hard time opening this until I got two rubber bands. And just wrapped them on the two partsMoreI had a hard time opening this until I got two rubber bands. And just wrapped them on the two parts top and bottom there you have to twist and then you twist opposite directions obviously.
Where is the juice in a disposable vape?
As all disposable sticks, the ejuice in the Puff Bar is packed in a polyfilled cotton block. It's perfect for taste, but it's not a sealed tank. The juice is usually covered in cotton, but there is a reason why there are many plastic seals and buffers in place to prevent the ejuice from escaping out of the mouth.
How do you use innokin Endura?
0:244:32Innokin Endura T18 Starter Kit Tutorial - Learn How to Use Your Vape!YouTubeStart of suggested clipEnd of suggested clipThe enduro t18 is really simple to use it's a mouth to lung device which means that you inhale intoMoreThe enduro t18 is really simple to use it's a mouth to lung device which means that you inhale into your mouth draw it down into your lung and then exhale.
How do you unlock an innokin vape?
You need to long-press either of the up/down keys first to unlock the wattage, then press either the up or down button a second time to increase or decrease the wattage respectively.
How do I change my innokin vape?
Should you wish to change the setting, hold either the "+ or -" button for a few seconds until the current power setting starts flashing then let go. Once the display is flashing, you can increase or decrease the setting as required. The display will cycle from 6.0W to 40.0W (in 0.5 steps).
How long does innokin EQ take to charge?
about 1hr 15 minutesThe EQs has a long charge. It took about 1hr 15 minutes to go from red to green, and then another 15 minutes for the green light to turn off.
How do you charge a vape EQ?
Use a certified wall charger with a high quality microUSB cable. Monitor the device and verify that it is charging. Wait until the device is fully charged. Note: All batteries have a limited number of full charge cycles.
How do you turn on EQ vape?
0:415:00Innokin EQ pod system EASY TO USE AND TRUSTED RE-FILLABLE ...YouTubeStart of suggested clipEnd of suggested clipSo it's simply a pod a battery. And that is it fill your pod insert. It back into your battery. AndMoreSo it's simply a pod a battery. And that is it fill your pod insert. It back into your battery. And that is it you are ready to vape it's as simple as they get how do we turn this on.
How to replace coil on Innokin Adept?
To replace the coil, first unscrew the tank from the body of the Innokin Adept. Next, unscrew the ring from the base of the tank: If there is a coil preinstalled that you need to remove, you can do so by lifting the coil with the edge of your finger or pulling up on the coil itself:
How to contact Innokin Adept?
In addition, as always, we're just a phone call away if you need help. Call (844) 303-4545 or you can email us at: customers@kaisvirginvapor.com
How to fill a vape tank?
Filling the tank involves three quick motions: #1 First, remove the drip tip. The drip tip is designed to hold the tank closed to prevent children from accessing the vape juice and also to keep the tank from accidentally opening in your purse or pocket. Just pull up on the d rip tip and it will pop out.
What is an Innokin Adept?
The Innokin Adept allows you to adjust the airflow, creating either a more airy vape with an easier draw or a tighter vape that requires more draw to pull the air through.
What happens if a coil is dry?
If your coil material is dry, you will get what is known as a "dry hit.". You'll know you got a dry hit because it tastes nasty, like singed fabric or burning rubber. Once you singe your coil, there's no going back and you'll have to toss it. For this reason, it's important to always remember to prime the coil first!
How many clicks does an e-cigarette have?
Most e-cigs come with a 5-click on/off feature, however, the Innokin Adept did something that seems like a small change but is actually very smart design. The Innokin Adept only requires 3-clicks to activate or deactivate it.
How to prime a wick?
To prime the coil, turn it upside down and drip 3 to 4 drops of e-juice into the coil. This will wet down the wick and prevent a dry hit.
What is the AFC on a vaporizer?
Many of our vaporizers come bundled with an accompanying tank (atomizer) which features a manually adjustable “AFC”, or airflow control ring. These rings can typically be turned clockwise to adjust the level of airflow you introduce to your coil when you inhale.
Where is the AFC ring on a atomizer?
While most airflow control rings are found on the bottom of our atomizers, there are a few atomizers we have that feature the AFC ring elsewhere, such as the top of the tank. If your device did not come with an included tank, you’ll likely have to adjust your airflow setting in a different way.
Why does my atomizer say "Check atomizer"?
While cleaning your atomizer and battery connection, inspect the threads and pins for any damage. Dents, nicks, or cuts in these areas can consistently cause the “Check atomizer” message to occur. A damaged connector will typically need to be replaced via warranty replacement or a new product, so please be very careful not to damage your connector!
How to clean 510 connectors?
Clean the male and female 510 threading of your device with a small amount of isopropyl alcohol. The male threads are located on the tank (atomizer), while the female threads are typically located at the top of your battery. We recommend using a cotton swab to get the isopropyl alcohol into the female threaded section. Remove all condensation, dirt, lint, dust etc from the connectors and allow them to air dry after swabbed with isopropyl alcohol. If you are using a vaporizer with a connector that is not 510 threaded, locate the brass colored contacts underneath the pod of your device and apply the same routine to them as you would your 510 connection.
What to do if 510 connector is not threaded?
If you are using a vaporizer with a connector that is not 510 threaded, locate the brass colored contacts underneath the pod of your device and apply the same routine to them as you would your 510 connection. While cleaning your atomizer and battery connection, inspect the threads and pins for any damage.
What does it mean when you have a smaller opening on an airflow coil?
With a smaller opening or less holes exposed, the less air you will pull through your coil. This simple principle applies to all of our products that feature adjustable airflow. Product shown: Innokin Ajax tank.
Does the Jem Pen have adjustable airflow?
Some devices such as the Jem Pen will not feature adjustable airflow. This is more common on “AIO”, or all-in-one style devices, as well as some of our more affordable beginner products such as the Glim, Gala and I.O. Q: My screen shows “Check atomizer”.
