Imini V2 Kit is a small, light, compact, and simplistic herbal concentrate vaporizer that fits in any pocket with ease! It features a single button and three variable output settings. Rapidly press the button five times to power the kit on or off.
How do I use the Imini vaporizer?
The iMini vaporizer works in two different modes, in the Normal mode with the direct output and the Preheat mode. To use the device in the Preheat Mode, tap the button twice, and the power button will repeatedly flash while it warms up the cartridge. To deactivate Preheat mode, press the button once.
What is the Imini V2 mod?
The iMini V2 Mod by Pluto features an ultra portable stealth design that fits in the palm of your hand. The iMini V2 Mod features a submerged atomizer design that can fit 10mm diameter and smaller tanks. The iMini V2 features a built-in 500mAh battery and has a output wattage of 15 watts.
What is the difference between the Imini and 510 thread vape cartridges?
The iMini vape kit comes with a replaceable 510 thread wickless ceramic coil atomizer, and it's also compatible with most of the 510 thread vape cartridges with a 510 thread connection; the cartridge has to be no wider than ~10mm. The iMini vaporizer features a rubberized design to protect from bumps.
What do the LED lights on the Imini vaporizer mean?
The iMini vaporizer features a rubberized design to protect from bumps. The LED light logo reflects voltage output and pre-heat mode. Press five clicks on the button to turn iMini on or off.
How do I turn on iMini V2?
Press five clicks on the button to turn iMini V2 on or off. Click three times to change the voltage and the LED light will turn green, blue or red. The iMini automatically turns off after ten seconds to prevent the battery from overheating.
What do the light colors mean on a vape pen?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting.
What does 3 blinks mean on a vape pen?
a short circuitBattery LED flashes 3 times Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
How do you heat iMini?
The iMini also features a unique (and optional) preheating function. To activate warm up mode, first tap 5 times to unlock the battery for use. Once unlocked, tap the button once and preheat mode will activate. The power button will flash repeatedly while it warms up the cartridge.
How do I know if my vape is fully charged?
Simply connect the pen battery to the charger and insert into a USB port on a computer or other electronic device. The light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
Why is my vape blinking blue and not hitting?
Whatever, the point is you need to recharge your vape pen. Sometimes due to low voltage, the pen battery can not charge properly. You may see that the charge is full, but the indicator light is flashing when you go to puff.
Why is my vape pen blinking when I hit it?
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
Why does my vape flash 4 times?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
Why is pen blinking 10 times?
Sometimes, a pen blinking ten times can mean that the voltage level is too low despite the battery being properly charged. In this case, you need to look at the battery connections of your device. Most often, this happens because the connections are either dirty or not lining up exactly with the battery.
How do I get the iMini to work?
Click on the power button five times rapidly to turn on the iMini, then hold down the button to begin a vaping session. If you have a thick oil concentrate and you wish to preheat the liquid, you can activate the preheating feature by clicking on the single button once.
How do I turn on my iMini vape pen?
0:475:14Imini 3 510 Vaporizer Review —2.0 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo five clicks will turn on the device and turn off the device three clicks is going to change theMoreSo five clicks will turn on the device and turn off the device three clicks is going to change the voltage.
How long should I let vape heat up?
You must let your wicks saturate to reduce the possibility of a dry hit. The general rule is to wait 15 to 30 seconds before puffing again. For people who are trying to quit smoking, 30 seconds can be a long wait.
Variable Voltage
What fun is a vape that can't adjust its voltage for your materials? No fun, that's what! The iMini features 3 voltage settings shown by light color, which illuminates the whole logo on the side, and which can be cycled through with three quick clicks of the button on the body: green for 2.9 V, yellow for 3.4 V, and red for 3.8 V.
Includes a 1ml Cartridge
The iMini Vape is ready to go right out of the box, coming complete with a 1ml thick oil cartridge. The iMini has a 510 thread connection, ready to hold your favorite cartridges and tanks, but the included cartridge is already fitted in and ready to be filled. It features glass and metal construction and a round mouthpiece.
Did you Find what you were Looking For?
Looking for something but can't find it? Maybe it's a product you saw in one of our stores?
How to use iMini in preheat mode?
To use the device in the Preheat Mode, tap the button twice and the power button will flash repeatedly while it warms up the cartridge, to deactivate Preheat mode, simply press the button once. If you hold the button continuously the iMini will work in the Normal mode with the direct output.
How long does it take for an iMini to turn off?
The iMini automatically turns off after ten seconds to prevent the battery from overheating. The iMini vaporizer works in two different modes, in the Normal mode with the direct output and in the Preheat mode.
