6 Ways to Fix a Vape that Won’t Charge
- 1 Verify That the Vape Itself is the Problem. The charger, the electrical outlet, and the vape itself. A problem with...
- 2 Try an External Battery Charger. If you own a mod that isn’t charging correctly when you connect it to a micro-USB...
- 3 Replace Your Mod’s Batteries. Even batteries that are designed to be recharged don’t...
- The battery is incorrectly installed. If your device requires removable battery, it might not turn on without the cells being properly installed. ...
- The device is simply turned off. ...
- The battery isn't charged. ...
- The atomizer has failed. ...
- Batteries again.
Why is my vape mod not producing vapor?
A flooded coil can cause your vape mod not to produce vapor, and this will often be accompanied by a gurgling sound or spitting when you try to vape.
Can a dead vape mod be fixed?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
How to troubleshoot your vape?
5 Ways to Troubleshoot Your Vape 1 Won’t Turn On. If your vape pen doesn’t turn on, there could be several factors at play. ... 2 Leaking Vape Juice. When you go to take a drag from your vape pen, the last thing you want is to get your handy sticky and smelly with e-juice ... 3 Strange Noises. ... 4 Tastes Burnt. ... 5 Making My Throat Dry. ...
Why choose Smok for your vaping mods?
Tackling minor device issues is one of the less enjoyable parts of vaping, but you can be confident that you’ll spend less time troubleshooting and more time chasing clouds when you choose a mod from SMOK.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Why does my vape stop working?
Other Issues That Cause a Vape to Stop Working. In general, a long list of problems can be caused by poor maintenance of your device. Just like any other piece of machinery, your vape device needs to be properly taken care of in order to function well.
What to do if atomizer doesn't work?
If that doesn’t work, check to make sure your atomizer coil isn’t dry, and that the atomizer itself isn’t flooded. Finally, make sure that the electrical connection between the atomizer and battery appears to be functioning correctly, cleaning off any dust or grime that may have built up.
Why does my e juice leak?
One of the top causes of leaking e-juice is a seal that is either cracked, missing, or just misaligned . Your device has several different seals, so examine all of them to see if you notice any crimping, damage, or looseness. Replacing these is an inexpensive fix, and can solve your leak problem altogether.
What is the downside of a glass juice tank?
The one downside to a glass reservoir is that it is more susceptible to cracking. Examine the tube carefully, looking especially closely at the end caps to see if there are any hairline fractures.
What to do if your vape doesn't turn on?
Still, if your vape doesn’t turn on even after being connected to a power source, there’s one more thing you can try. Check your battery.
Why is my vape pen not working?
Some of the most common causes behind vape issues are dead batteries, leaky o-rings, and burned coils. Hopefully, this guide helped you diagnose the cause behind your vape pen problems. If you’re still feeling puzzled, it may be helpful to visit a vape store for assistance.
What to do when your vape pen makes a gurgling sound?
When your vape pen starts to emit odd noises, the first thing you should do is turn it off and stop using it . The second thing you should do is check the tank for signs of flooding. Gurgling sounds often mean that the tank is too full.
Why won't my vape pen turn on?
Won’t Turn On. If your vape pen doesn’t turn on, there could be several factors at play. A poor charger connection, a faulty charger, or a dead battery can all cause your pen to shut down semi-permanently.
What to do if your vape is leaking?
If your vape uses a latching mechanism , check to ensure that the latch is in excellent condition.
What happens if your e-liquid tank is tight?
Over-tightening your tank can cause premature wear and tear that damages the o-rings.
How long after refilling e-liquid can you drag?
If you’re not allowing your e-liquid to permeate the wick, you might be doing yourself a foul-tasting disservice. Try waiting two minutes after refilling before taking a drag. However, the heating coil in your device may be close to burning out, causing your hits to taste like the worst batch of popcorn ever made.
Why is my mod not producing vapor?
Mod Not Producing Vapor: Battery Problems. If your device isn’t firing, it might be because your battery isn’t sending power to your coil. If it’s a minor issue, this is the most obvious reason for a lack of vapor and is the simplest to solve. However, serious issues with batteries tend to mean you’ll need a replacement.
Why is my e-cigarette not producing vapor?
There are many potential reasons your e-cigarette might not be producing vapor, but they can be broken down into issues with your battery, connection problems, issues relating to your tank and road-blocks put up by the software on a mod. Generally speaking, you’ll be able to solve your problem without taking it into a vape store for a repair ...
How to fix a flooded coil?
Fixing a flooded coil is fairly simple: you can blow down through your mouthpiece to force the liquid out through the airflow holes (or invert your tank and blow through the airflow holes to force liquid out of the mouthpiece), or even just turn your device to a higher setting and clear the tank by vaping.
Why won't my e-cigarette fire?
The most obvious problems that could lead to your e-cig not firing are that your device isn’t switched on, that your battery isn’t charged or that your wattage setting is too low. Most devices switch on with three or five quick presses of the fire button, so try that first – usually an LED will flash or the screen will activate so you can see when it’s switched on. If this doesn’t work, the battery could be depleted, so try plugging your device into a charger (for mods with on-board charging or in-built batteries) or removing the battery and charging it separately (for devices with removable batteries).
How to tell if a mod is locked?
On mods with screens, there will likely be a padlock symbol or other sign to indicate that your device is locked. On vape pens, it might not be as easy to spot, but try clicking the fire button three or five times in quick succession, and look for a blinking LED to indicate that you’ve done something.
Why does my TC tank stop firing?
If your liquid isn’t reaching the wicks around the side of your coil head , you’ll need to fill up. You might also have this problem just after filling up, if the wick hasn’t had time to soak up the e-liquid yet.
Can you fix a vape without a vape store?
Generally speaking, you’ll be able to solve your problem without taking it into a vape store for a repair or getting a replacement device, but if nothing works, it may hint at a more serious issue. Here are all the things to check out before you give up on your vaping device, broken down by the type of issue.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
bombastinator ECF Guru Verified Member ECF Veteran
Occam’s razor says garbage manufacturing. It might have been humidity or some such that did the damage but it even being susceptible is unacceptable. Is it still in the warranty period?
bwh79 Vaping Master Verified Member ECF Veteran
Did you try a reset? Insert the batteries and close the battery cover while holding the “minus” button. The device should reset to factory condition. If that doesn’t work I would look into warranty service or replacement, if it’s available.
bwh79 Vaping Master Verified Member ECF Veteran
I have not tried a reset but I will for sure! So when I reset it the batteries need to be inserted but does the mod need to be on or off?
ScottP Vaping Master Verified Member ECF Veteran
Thank you! I just reset it but it still didn't work for the screen.. I am going to be buying a new mod soon, I want to invest in something really good.. Do you have any suggestions?
Mr. Relentless Super Member ECF Veteran
I would say its safe to vape with a rta. You can guess your usual wattage pretty close by heat and ramp up speed. Unless you already vape a rda to the edge of your batteries amp rating then i wouldnt try. I wouldnt use it with a tank either, might burn alot of coils.
