In order to try sub-ohm vaping, you’ll need one of the following set-ups: An RDA (rebuildable dripping atomizer), which requires you to manually drip the e-liquid every few puffs An RTA (rebuildable tank atomizer) that utilizes a clearomizer and built-in coil (eliminating the need for manual dripping)
Full Answer
What is a sub ohm vape?
When you push electricity through a conductor (such as a coil) it meets resistance. This resistance is measured in Ohms (Ω). And when you use coils with a resistance of less than 1 ohm, you are sub ohm vaping. Today, sub ohm resistances are common in off-the-shelf tanks and pre built coils,...
How do I select a mechanical mod for sub-ohm vaping?
When selecting a mechanical mod for sub-ohm vaping there are a few things to consider. You will want to select a mod that is well vented. These vents allow heat to escape from normal use but also allow gases to vent in case of battery failure. You can't have too many or too large of vents for your mod. NEVER USE AN UNVENTED MOD TO VAPE SUB-OHM.
Why do sub-ohm vapers use higher VG e-liquids?
It can also increase throat hit, although typically sub-ohm vapers use high VG e-liquid to offset the increased throat hit as a high PG e-liquid could be too harsh. The larger juice holes are also necessary to cope with VG e-liquids, which are much thicker than high PG e-liquids.
What ohm coil should I get for my vape?
Many sub-ohm Vapers draw directly into their lungs, and VG’s lighter throat hit helps there too. Because of the increase of vapor pull into the lungs, you will want to reduce the nicotine level of your eJuice to .6% or less. A 0.5 ohm pre-made coil.
What ohms should I vape at?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5.
How do you use a MIG vapor?
Simply take off the magnetic mouthpiece to expose the chamber. Then load some ground herbs into the heating chamber, making sure you don't pack it too tight. After your chamber is packed, you can put the mouthpiece back on and you are ready to turn on the device.
How do I know if my vape is sub ohm?
When the coil has a resistance below 1.0 Ohms then the person using the vape is considered Sub Ohm Vaping.
What is the best wattage for sub ohm vaping?
Sub ohm devices utilize low resistance coils that are less than one ohm, hence the name sub ohm. They also provide enough airflow suitable for direct lung inhalation. Sub ohming typically requires vape mods capable of putting out a minimum of 40 watts, but the higher levels can reach and exceed 200 watts.
Is MIG vapor still in business?
Business Response /* (1000, 8, 2021/04/23) */ Hello, This is correct, the company is closed. We were bought out so in order for her issue to be taken care of she will need to contact Vaporfi, if she types in migvapor.com vaporfi is now he site that it redirects to.
How do you charge a MIG vapor?
Plug into any USB device or port to charge your Mig Vapor Battery. Works with any computer or USB adaptable device.
How do you inhale sub ohm?
You first draw the vapour into your mouth, then you inhale it into your lungs. This is the traditional way to vape and how most people smoked. When sub-ohm vaping, most people DL. This is because there is so much vapour being produced so quickly, the easiest way is to directly inhale the vapour.
What liquid is best for sub ohm?
High-VG juices work best with sub-ohm coils – coils with a resistance below 1.0ohm. This means they fire at higher power outputs, often between 20w – 100w and even 200w!
Is Sub ohm vaping worse for you?
The 7 genes that were affected by both exposure conditions (0.15 Ω & 1.5 Ω) were dysregulated to a greater extent following exposure to e-cig aerosols produced under sub-ohm conditions (Fig. 3B). This suggests that sub-ohm vaping may be more detrimental to lung health than vaping under regular conditions.
How do you get big clouds with a vape?
Small changes to the way you inhale and exhale while using a vaping device can affect the clouds produced. Try leaning forward slightly and straightening back up as you inhale. Straightening up while inhaling naturally opens up the lungs and allows more vapour to enter them.
Is Sub ohm vaping better?
Due to the density of the cloud, one can taste much more flavour of the e-liquid while Sub-Ohming, compared to classic vaping. 4. Generally speaking, Sub-Ohm devices are better engineered than standard e-cigarette pens due to the fact they are more robust and have a solid structure.
Is Salt NIC for sub ohm?
Nicotine salts are not recommended for sub-ohm high-powered devices because of the higher nicotine levels in nic salts. Nicotine salts use high nicotine strengths such as 50 mg nicotine levels compared to the usual 3 or 6 mg in regular e-juices.
What Is Sub-Ohm Vaping?
At its simplest, sub-ohm vaping refers to a style of vaping that requires the use of a coil that has a resistance of less than 1.0 Ohm. Having a resistance under 1.0 Ohm makes it “sub-ohm” as it is less than one Ohm. Sub-ohm devices produce more vapour than other types of vape kit and are typically used as a DTL vape (direct-to-lung).
Why to Choose a Sub-Ohm Vape?
There are many benefits of sub-ohm vaping that can appeal to certain types of vapers.
Is Sub-Ohm Vaping Right For Me?
Each vaper wants something different from their vaping experience, and whether sub-ohm vaping is right for you will depend on your goals. Sub-ohm vaping isn’t for everyone, and that’s ok! Most people take up vaping as a way to transition from smoking.
What E-Liquid is Best For Sub-Ohm Vaping?
For sub-ohm vaping, you want a vape juice with a high VG content and a low nicotine strength. The goal for this type of vaping is usually to get the biggest cloud and the best flavour, rather than creating an experience similar to smoking to satisfy cravings.
What Batteries Do You Need For Sub-Ohm Vaping?
Sub-ohm coils require a lot of power to work properly, so you’ll need a battery for your vape device that can provide the right wattage. Lower wattage batteries won’t have enough power to get the tank going properly, and you’ll burn through batteries very quickly and could cause damage to your kit. You can sub-ohm vape at around 40W, although sub-ohm kit batteries can be upwards of 230W.
Why Do Sub-Ohm Kits Need Airflow?
Sub-ohm kits will often feature adjustable airflow. This is to allow the coil and vapour to cool down. Using a mod kit is all about customizability to get the perfect vape experience for you.
Why is sub ohm vaping so popular?
Sub-ohm vaping is so popular because it offers an easy way to crank up the flavor and quality of your vapor production, taking everyday vape sessions to new levels. With today’s sub-ohm options, it’s also a very safe, user-friendly way to maximize your vape. Plus, there are many ways to customize your vape experience when using a sub-ohm setup, allowing for the ultimate in flexibility and versatility.
Is sub ohm vaping safe?
The absence of widespread understanding of the topic has unfortunately led to a certain amount of controversy surrounding sub-ohm vaping, with many people unsure whether or not it’s safe. The good news is, with a bit of education and a smart approach, sub-ohm vaping can be a safe, enjoyable way to maximize flavor and vapor production.
Can you use e-liquid for sub-ohm vaping?
Technically, you can use just about any e-juice for sub-ohm vaping – but you definitely don’t want to. Sub-ohm vaping requires a much higher temperature than standard vaping, and not all e-liquids can stand up to the heat. If you choose the wrong e-juice, you’re going to end up with a disappointing (and possibly very unpleasant) vape experience, with vapor that is flavorless or even burnt-tasting.
Is it safe to vape with a lithium battery?
No matter how you choose to vape, battery safety is important. However, it becomes especially critical with sub-ohm vaping. Make sure you’ve selected the right battery for your device and consider choosing an unprotected IMR or hybrid lithium battery. These types are among the most popular, mainly because they are typically safer due to their special structure and chemistry. Never use batteries from an unknown or cheap brand, and always toss damaged or dented batteries – it’s just not worth the risk.
What is sub ohm vape?
Sub-ohm vape pens. You’d usually use a vape for a restricted, Mouth-to-Lung vape. However, there are options that combine the traditional vape pen design with more power and low resistance coils. The Geekvape Mero Aio combines ease of use (it has just three power settings) with a 0.4Ω coil.
How much nicotine does a sub ohm vape have?
As a result, you’ll find most sub ohmers use very low levels of nicotine – 0.3% is quite common.
Why do sub ohm tanks have air holes?
Due to the increased heat generated by sub-ohm vaping, most sub-ohm tanks offer greater airflow. You’ll usually find larger air-holes (often adjustable) and some tanks feature both top and bottom airflow controls.
What to think about when sub ohm?
When you sub ohm, you need to think about the VG:PG ratio of your e-liquid. In a nutshell, the higher the VG, the more clouds you will get. On the other hand, higher VG juices are harder on coils, so you do have to balance your desire for clouds against shorter coil life.
What happens if your vape temperature is too high?
Once the temperature gets too high, you can lose flavour or even burn the wick in your tank. Enter temperature control (TC) vaping. Temperature Control Vaping: Everything You Need To Know. TC devices constantly measure the resistance of your coil, and from that can work out the temperature of your coil.
How to lower resistance of coil?
To lower the resistance of your coil, you can use a thicker wire. If you apply the same power to two wires of the same length but different thickness, the thicker wire will heat up more slowly. To reach a similar temperature in the same time with a lower resistance coil (thicker wire), you need to provide more power.
What is a pod mod?
A cross between a pod and a mod device, these combine some of the simplicity of a pod system with some of the power of a mod system. That makes them a great choice for people starting out with sub-ohm vaping.
Definition of Sub Ohm Vaping
Sub-ohm vaping is a way to increase vapor production by decreasing coil resistance below 1.0 ohms. Sub-Ohm Vaping used to be exclusively fixed power, such as a non-variable battery in a mechanical mod. There was also math involved.
The Most Important Element: Batteries
Here’s where the no-joking part comes in. By decreasing the coil resistance below 1.0 ohms, the battery must draw more amps to deliver the current. This increases the power the device generates, which in turn creates more heat in the battery and the coils. If you exceed your battery’s amp limit, it could spark, catch fire or explode.
Regarding Mechanical Mods
Many Vapers enjoy building their own coils, but that is no longer necessary to sub ohm vape.
To Sub-Ohm or Not to Sub-Ohm
It’s only fair to say that many people enjoy sub ohm vaping. They’re experienced Vapers who may have been building coils for some time at regular resistance levels. They most certainly understand safe practices and always follow them.
Where to Look For Your First Sub-Ohm Device
Purchasing your first sub-ohm kit can be done in a brick and mortar vaping shop or simply bought online. I suggest you visit the Direct Vapor website. They have a lowest price guarantee on vaping products and will match the price if you happen to find it cheaper elsewhere.
Why do vapers use sub ohm?
The reason some advanced vapers “sub-ohm” is to increase the power output of fixed voltage devices like mechanical vape mods and non-variable regulated devices to create more vapor or flavor . Although it might sound simple it's actually a complex and often controversial topic within the vaping community. The goal of this guide is ...
What batteries do you use for sub ohm vaping?
You want to make sure it is an authentic battery from a reputable brand. Typically sub-ohm vapers use unprotected IMR or hybrid lithium batteries.
What does sub ohm mean?
Typically sub-ohm vapers take lung hits meaning they inhale straight to their lungs increasing the vapor they can inhale each puff. Those who vape sub-ohm usually favor e-liquid with a higher percentage of vegetable glycerin than propylene glycol.
Why is VG better than PG?
This is because VG has reduced throat hit compared to PG which helps to accommodate for the increased amount of vapor inhaled. Usually those vaping sub-ohm will also use lower nicotine strengths (typically 6mg/ml and under) compare to those vaping above 1ohm also because of the additional vapor produced and inhaled each pull.
Can you use an unvented vape mod to sub-ohm?
You can't have too many or too large of vents for your mod. NEVER USE AN UNVENTED MOD TO VAPE SUB-OHM. You will also want a vape mod with low voltage drop.
Can you use variable voltage for sub ohm vaping?
Although it has become quite popular for people to use variable voltage/wattage devices for sub-ohm vaping it is actually unnecessary. Sub-ohm vaping evolved as a way to increase power to the coils beyond what the safe capacity of regulated devices available at the time. Today high power regulated devices are widely available can deliver a consistent amount of power to the coils allowing you to use the resistance of your choosing and the ability to adjust it to your liking while potentially out performing the capacity of even a sub-ohm build on a mechanical vape mod. While low power regulated devices remain best suited for resistances above 1ohm.
Is it safe to vape with a sub ohm battery?
The honest answer is yes and no. When some basic safety rules are followed sub-ohm vaping is quite safe. If these safety rules are not followed your battery or device can fail resulting in injury or property damage from fire or explosion.
What is sub ohm vaping?
Sub-ohm vaping is a style of vaping. It is characterised by large clouds of vapour and a huge amount of flavour from your juice. To do this you need a sub-ohm e-cig that delivers a higher wattage and a coil with a resistance of below 1.0ohm. The way that you physically vape is different when sub-ohm vaping.
What is the best e-liquid for sub-ohm vaping?
The best e-liquid for sub-ohm vaping is one with a high VG content and a low nicotine strength. A lot of vapers who sub-ohm vape, will use the lowest possible nicotine strength available or even a zero. Because nicotine delivery is not the goal for this style of vaping. A high VG content means that the clouds of vapour will be much thick, ...
What is the difference between DL and MTL vape?
DL vape – Direct lung vaping. You inhale the vapour directly into your lungs in one big breath, like breathing in. MTL vape – Mouth to lung vaping. You first draw the vapour into your mouth, then you inhale it into your lungs. This is the traditional way to vape and how most people smoked. When sub-ohm vaping, most people DL.
Why is my vape thicker?
This is because if you use a high nicotine strength the hit will be too much. Also, the type of e-liquid to use when sub-ohm vaping is one that has a high VG content. This makes the juice thicker and will produce bigger clouds. When you couple a lower nicotine strength with a high VG content you get a smooth vape.
What is DL in vaping?
It requires a different style of inhaling. Vapers do what is called DL (Direct Lung) inhaling, which means breathing the vapour straight into your lungs.
Why is vaping high in VG?
A high VG content means that the clouds of vapour will be much thick, the VG diluent in the e-liquid is responsible for the vapour production. So, the more VG, the more clouds are produced.
Why does my e-cigarette have enhanced flavour?
The enhanced flavour happens because each draw on your e-cig when sub-ohm vaping, vapourises more e-liquid, so you are getting a more concentrated hit of flavour. Remember to use a lower nicotine strength though. Smoother vape - When sub-ohm vaping, you will use a lower nicotine strength e-liquid. This is because if you use a high nicotine strength ...
Sub-Ohm Vaping: The Basics
Ohms law refers to the current of an electronic device, in this case the atomizer. Ohm’s law divides the voltage difference by the current. This comes into play when trying to create a thicker and more intense vapor while utilizing a lower resistance atomizer. You will get a more warm, throaty vapor with a lower Ohm.
What is Sub-Ohm Vaping?
Before explaining what sub-ohm vaping means exactly, it's important to discuss what an ohm is. An ohm is a standard unit of measurement for determining the resistance or capacity of an object (in this case your vape's coils) to conduct current.
Sub-ohm Vaping VS Regular Vaping
One of the key selling points of sub-ohm vapes is the fact that it lets you pump large amounts of watts into your vape. The result is a lot more battery power and e-liquid used up. What you get out of it in return is a warmer, denser, more intense, and flavorful vapor.
Performance
Sub-ohm vapes are more flavorful and produce more vapor compared to high resistance vapes. Higher heat mass from the thicker wires allow the coils to vaporize a lot more e-liquid. This is why you get a big increase in flavor and vapor production.
