Press the button on top of the mouthpiece to turn it on. The lights will turn purple and flow upwards as the PAX 2 heats up, and turn green when it reaches your target temperature. To change the temperature, hold down the button for one second, press it to cycle through the different heat options, and shake to finalize your selection.
Full Answer
Can You vape DMT?
There are a few ways to use DMT. The most well-known is to drink it in the form of ayahuasca — but you can smoke or vape it too. Vaping DMT is sometimes referred to as a “business trip.” This name comes from the implication that DMT used in this way produces a powerful but short-lived experience.
Is Pax 2 a vaporizer?
Thoughtfully designed for the discrete consumer, PAX 2 simply doesn’t look like a vaporizer, opting for a streamlined anodized aluminum body. Reduced odors and a remarkably small and light size allow for low-key consumption on the go.
How do I use a Pax 2?
How to Use a PAX 2: Instructions, Tips, Details & More. 1 Step 1: Pack the Oven. Remove the magnetic oven lid, located at the bottom of PAX 2, by gently pushing on one side and lifting it off. Finely grind ... 2 Step 2: Select a Mouthpiece. 3 Step 3: Turn On the Device. 4 Step 4: Select a Temperature. 5 Step 5: Draw.
How do you inhale DMT?
You don't want to start holding the lighter closer/longer until the dmt is liquefied and you are ready to begin inhaling it. As the liquid begins bubbling and plumes of vapor/smoke begin to appear, start inhaling gently and smoothly for as long as possible.
Can you vape concentrates in PAX 2?
Simply slip the concentrate insert into the PAX 2 chamber and load it with your concentrate. The recommended temperature for vaping wax and oil with the PAX 2 is 380F. Our PAX tip for vaping wax is to clean the concentrate insert using isopropyl alcohol and a q-tip after every one or two sessions.
How do you vape with a PAX 2?
1:314:14How to Use PAX 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipPower on with a short press on the button located in the center of the mouthpiece.MorePower on with a short press on the button located in the center of the mouthpiece.
Does PAX 2 have party mode?
Knight Rider AKA Green Mode Roll the PAX 2 three times the opposite direction you did to access Party Mode. The LEDs go green and slide back-and-forth reminiscent of KIT from Knight Rider. For more information on the PAX 2 read our PAX 2 review post.
How tightly should you pack PAX 2?
Pack. The PAX 2 works best tightly packed, helping the heat spread throughout the bowl. You can use the lid to firmly tamp down the contents of the oven. Smaller loads still need to be tightly packed for best performance.
What temperature should I set my PAX 2?
PAX 2 and PAX 3 Light GuideTemperature Setting 1 360ºF (182ºC)Temperature Setting 2 380°F (193°C)Temperature Setting 3 400°F (204°C)Temperature Setting 4 420ºF (216ºC)2 more rows•Mar 9, 2022
Can I put hash in my PAX?
PAX 3 vaporizer. The PAX 3 led the way in sleek looking portable vapes that not only look good but perform well. It comes shipped with a cartridge that you can load up concentrates and oils with. I used that for the ground hash.
How many puffs are in a PAX 2?
When you fully pack it you can expect roughly 20 full draws before your herb is spent. There is also a way to use the PAX with less herb, like as little as 0.15g. Using the method I'm about to describe you can get away with only packing the oven half full and still get great performance and vapor production.
What does party mode do on the PAX 2?
Classic Party Mode When inhaling from the Pax 2 while Party Mode is active the lights will flash and change at a much more rapid speed. The standby timer is extended to one minute between sensing either general movement or lip movement.
What does blue on PAX mean?
StandbyStandby - A blue LED indicates standby when Pax is motionless for 30 seconds. Battery Levels - Shake Pax to check your battery level: red blinks = less than 10%, yellow blinks = less than 80%, green blinks = 80% - 100%
How long does a bowl last in PAX 2?
The length of a full charge is dependant on many factors including temperature settings, individual sessions and the amount of times your PAX is cooling and reheating. In general, a full charge could last between 5-10 sessions.
Can you put Kief in PAX?
The PAX 3 Complete Kit is the most recent addition to the innovative PAX lineup of portable herb vaporizers. The “complete” kit includes a Concentrate Insert, allowing you to expand your usage and switch between Loose Leaf material and Extract. You can use this insert for your kief!
What temperature should I set my PAX?
Low (520° F / 270° C) Medium Low (610° F / 320° C) Medium-High (700° F / 370° C)...Simply give your PAX vape a shake, and the light petals will illuminate to show you how much battery you have left:One petal = 0 – 25% battery life left.Two petals = 25 – 50%Three petals = 50 – 75%Four petals = 75 – 100%
How to turn on a PAX 2?
Tucked away underneath the mouthpiece is the PAX 2 power button. Simply press down quickly on the center of the mouthpiece to turn on your device. Please note that PAX 2 will enter standby mode after approximately 30 seconds, and the device will automatically shut off after three minutes of non-use.
How to adjust temperature on a PAX 2?
To adjust the temperature setting, place PAX 2 into temperature set mode by pressing and holding the button until the LED indicator responds. Continue to short-press the power button to cycle through the four temperature settings: Shake PAX 2 or long-press the power button to exit power mode.
How to clean a PAX?
Keeping your PAX clean is easy. Remove the mouthpiece and oven lid, then dip a pipe cleaner in isopropyl alcohol and insert it into the vapor pathway. To clean, floss the pipe cleaner back and forth inside the device. The pipe cleaner will pop out the internal oven screen. We recommend cleaning the screen by placing it in a cup of isopropyl alcohol. The mouthpiece could be cleaned in the same way.
What is the LED light on a PAX 2?
The LED light indicator on PAX 2 is made up of four petals in the shape of the PAX logo. This indicator communicates temperature settings, battery life, heating status, and more. Here’s a quick guide to understanding your LED indicator.
What is a PAX 2?
PAX 2 comes with two mouthpieces constructed of food-grade silicone: a flat mouthpiece and an elevated mouthpiece. You can use whichever mouthpiece you prefer. Simply pull up the mouthpiece to remove and push down to replace. You can also purchase replacement PAX 2 mouthpieces in bright colors.
How to remove magnetic lid from PAX 2?
Remove the magnetic oven lid, located at the bottom of PAX 2, by gently pushing on one side and lifting it off. Finely grind your dry herb material and place it into the oven, which holds approximately .35 grams. Pack the oven firmly.
How to exit power mode on PAX 2?
Shake PAX 2 or long-press the power button to exit power mode.
