You raise the pressure of the liquid CO2 via a compressor (top middle), and then raise the temperature via a heater (top right). The supercritical CO2 is then passed through some high-grade pot contained in an extractor (bottom right corner).
Full Answer
What is a CO2 vape cartridge?
CO2 cartridges are named after the CO2 extraction process that produces the oil they contain. For many, CO2 cartridges have become the gold standard of vape cartridges due to their purity and potency.
What is the best way to vape cannabis oil?
These battery-powered devices are great entry-level cannabis oil vaporizes. They usually work well with both, oils and waxes. Oils used in vape pens should be liquid enough and not thick to prevent any burnt oils and smoke. Portable Vaporizers.
How do you change CO2 into a liquid?
With special equipment (i.e., in a lab), you can change CO2 gas into a liquid by increasing the pressure to 75 pounds per square inch and keeping the temperature below -69 ℉. Brrr! This liquid CO2 is the starting point for our CO2 extraction.
What is CO2 oil and how is it made?
What is CO2 Oil? As cannabis connoisseurs seek higher purity and greater quality, previously obscure extraction methods have come into vogue for making different, and better, cannabis concentrates. One such method is supercritical fluid extraction, used for making so-called “CO 2 oil.”
Can CO2 oil be vaped?
High-quality winterized CO2 oils are especially compatible with vape cartridges since they do not require any additional thinning agents in order to be vaped out of carts. Because these cartridges contain no additives, the natural strain-specific terpenes (flavors and aromas) of cannabis can shine through.
Is CO2 better than distillate?
Cannabis distillate has a clean and smooth flavor and the user experiences more potent effects than CO2 oil. CO2 oil has a lower price point than distillate and can carry a wider range of cannabinoids and natural flavor.
How do you vape thick oil?
Any decent vape oil containing a high concentration of cannabinoids such as ours is going to be very thick, and therefore take longer to heat and produce vapor than thinner e-cigarette juices. For this reason, its always best to start by pre-heating your oil for 5-10 seconds before using a “cold” cartridge.
How do you smoke vape oil without a vape?
1:332:23*EASY*how to vape without a battery/ pen/boxmod - YouTubeYouTubeStart of suggested clipEnd of suggested clipDevice your cartridges your vape cartridge. You're gonna stake the black wire into the hole. AndMoreDevice your cartridges your vape cartridge. You're gonna stake the black wire into the hole. And then once you get that and you're gonna use the red wire and touch it to the side of the thing.
Is CO2 oil stronger than distillate?
The Difference Between CO2 & Distillate Cartridges Distillate is usually more highly concentrated, so it's stronger and less is required to achieve the same effects.
Can you get high off of CO2 cartridges?
CO2 canisters are sometimes confused with nitrous oxide canisters, used in whipped cream dispensers. Inhaling nitrous oxide is illegal, extremely risky and can cause serious health problems, but some people engage in it to get a "high." Inhaling CO2 from a CO2 canister causes death due to suffocation.
Can you vape thick oil?
With the special requirements for vaping high viscosity extracts, taking advantage of specialized vape pens is your best bet. Popular solutions for viscous oils are dab rigs and sub-ohm vape pens.
What oils can you vape?
What Oils Are Good for Vaping?Essential oils (peppermint, rosemary, chamomile, lavender, and others)Cannabis oils (CBD oils, THC oils, hemp oil)
Can I use vegetable oil as vape juice?
Vegetable oil is meant to be used as a food substance, not something to be inhaled or heated in a vape tank. Even though some vape juices do resemble food grade oils and are crafted with food grade flavorings, any type of kitchen oil is not intended for vape devices and is therefore not safe for vaping or inhaling.
Can I put vape juice on my tongue?
Getting vape juice in your mouth might be unpleasant, but you should not worry too much. The juice may taste bad, but it is mostly made from ingredients that are not harmful, such as propylene glycol and vegetable glycerin, which can also be found in many food products.
How do you vape without inhaling into your lungs?
It is important to purse your lips around the mouthpiece so there is no air gap where vapour can escape. Then, depending on your preference, you can either fill your mouth with vapour before taking it into your lungs (direct to lung) or exhale it without inhaling.
How do you vape without getting caught?
Swallowing the vapor before breathing out gently through your nose is a good way of eliminating the visible evidence of your vape device. Sometimes an extra breath between inhaling and exhaling can also combat vapor. Just be sure your initial breath isn't so deep that a second breath is impossible.
The added Value of CO2 Extraction
Source: http://www.tst.tw/en/technology-more.php?Key=1Supercritical CO2 is increasingly being used as a cheap, recyclable and environmentally safe...
Supercritical CO2 Extraction 101
Source: http://www.yara.ie/co2-and-dry-ice/industrial-applications/super-critical/Warning: The following description may seem a little complicated...
Additional Extracted Value
Source: http://www.medicaljane.com/2013/12/06/solvent-less-wax-combines-potency-and-purity/As we’ve mentioned, one of the many benefits of CO2 extr...
Dry Ice Diy CO2 Extraction
Source: https://www.alchimiaweb.com/blogen/make-hash-with-co2-dry-ice/The cost of custom made CO2 weed oil can vary wildly. As we touched on above,...
Simple Dry Ice Hash-Making Steps
The process of actually making your dry ice hash is fun, easy to follow and won’t take you anywhere near as long as it will take you to gather the...
The CO2 Cannabis Conclusion
Supercritical CO2 produces cannabis concentrates that are much safer, cleaner, less toxic and more aromatic than butane hash oil products. CO2 oil...
What is the difference between CO2 and resin vape cartridges?
While CO2 cartridges are highly effective and cost-efficient, live resin cartridges contain a higher amount of natural terpenes and tend to be more flavorful.
What is CO2 cartridge?
CO2 Cartridges. CO2 cartridges are named after the CO2 extraction process that produces the oil they contain. For many, CO2 cartridges have become the gold standard of vape cartridges due to their purity and potency. CO2 oils are able to retain modest levels of plant-based terpenes, meaning that they contain much of marijuana’s natural flavor ...
Can CO2 be used in vape cartridges?
High-quality winterized CO2 oils are especially compatible with vape cartridges since they do not require any additional thinning agents in order to be vaped out of carts. Because these cartridges contain no additives, the natural strain-specific terpenes (flavors and aromas) of cannabis can shine through.
Is CO2 oil better than marijuana?
Therefore, if you are looking to take advantage of marijuana’s medicinal properties, CO2 oil may be a better choice.
Does CO2 oil have terpenes?
Moreover, CO2 still retains a moderate level of plant terpenes, meaning that you are not sacrificing much flavor by vaping a CO2 oil. If you are looking to enjoy the most flavorful and aromatic cannabis concentrate on the market, live resin cartridges are the way to go.
What is CO2 Oil for vaping?
CO2 (Carbon Dioxide) is one of many extraction methods for creating oils from cannabis plants. CO2 is a gas, but with enough pressure, it can change to its liquid form. The cannabis plant is processed in the liquid CO2, which allows the cannabinoids and terpenes to separate from the remaining plant material, creating a concentrated oil.
What is distillate?
Distillate is a highly concentrated extraction method to separate terpenes and cannabinoids from the original cannabis plant. Distillate can form either CBD or THC concentrates from extracted cannabis oils.
Vape pen 101
Vape pens, also called weed pens, are quickly becoming a popular way to consume cannabis. The hand-held device is used to smoke cannabis concentrates such as oils and distillates. Vape pens will heat the oil to produce vapour that’s inhaled through a mouthpiece.
What is the difference between C02 and distillate?
Both CO2 oil and distillate concentrate are great ways to mix in some added potency to your cannabis consumption. But beyond that, these two products are about as comparable as apples and oranges.
The best vape products
To decide what’s better, CO2 oil or distillate, some cannabis consumers say it’s best to try vaping with different products. Kootenay Botanicals has a variety of locally sourced vape accessories and products for vape newbies and connoisseurs alike.
How to make CO2 oil?
To make CO2 oil, concentrate makers manipulate temperature and pressure to turn CO2 into a liquid. Cannabis plant material is then soaked in the liquid, which chemically strips cannabinoids and terpenes out of the plant matter. After this process is complete, the plant matter is removed from the solution. From there, the concentrate maker again ...
What is CO2 oil?
CO2 oil, sometimes also called CO2 hash oil or CO2 cannabis oil, is the general name used to refer to any cannabis concentrate made using CO2 as a solvent. Beneath the umbrella of CO2 oil there are actually several specific types of cannabis concentrates. But as long as the process through which the concentrate was made uses CO2 as the solvent, ...
What happens when CO2 evaporates?
When the gas evaporates away, it leaves behind a concentrated substance comprised almost entirely of cannabinoids and terpenes.
What is supercritical CO2 extraction?
Supercritical CO2 extraction is a process through which CO2 gas is compressed beyond its “critical point” so that it becomes a “supercritical fluid.”. That fluid is then applied to cannabis plant matter, stripping away many of its cannabinoids and terpenes.
Why is CO2 extraction important?
Supercritical CO2 extraction is known for producing a high quality product primarily because the CO2 gas can reach its supercritical point at pressures and temperatures that don't damage the cannabinoids and terpenes being harvested. Additionally, CO2 evaporates away cleanly and does not contaminate the final product.
How is CO2 consumed?
CO2 concentrates are consumed primarily through vaporization. Concentrates like CO2 hash oil and CO2 cannabis oil are often used in a vape pen with a pre-filled cartridge. Concentrates like CO2 wax or some other form of CO2 THC extract are often consumed by dabbing.
What is the solvent used to extract the desired compounds from the cannabis plant?
Carbon dioxide. In cannabis concentrates, CO2 refers to a nonflammable solvent used to extract the desirable compounds from the cannabis plant. The CO2 extraction process can include the use of subcritical and supercritical fluids, which vary in pressure and temperature.
What is CO2 oil?
CO2 oil is a term used to describe any cannabis concentrate created by CO2 extraction. CO2 extraction relies on a closed-loop system and the chemical is purged from the final product.
How to use CO2 oil
CO2 oil is vaporized. It can come in vape cartridges and consumed through a vape pen, or as a concentrate, or dab, in the form of a shatter or wax. If in one of these forms, CO2 oil needs to be flash vaporized and consumed through a dab rig.
Why is CO2 used in cannabis extraction?
There are several reasons why CO2 is particularly useful within botanical extractions, namely with cannabis: 1 CO2 is a naturally occurring compound. It exists all around us and our bodies produce it. 2 As far as non-polar solvents are concerned, CO2 is among the safest. In fact, the FDA has labelled CO2 safe for industrial extractions, making it a much less controversial solvent than petroleum based hydrocarbons such as butane or propane. 3 The conditions that allow CO2 to change from a fluid state to a supercritical state can occur without having to exceed temperatures above 90°F, meaning there is less risk of compromising the natural volatile compounds found in cannabis. 4 CO2 is also unique in that its solubility will change with pressure, allowing for fractioning of the many different types of biomolecules available in cannabis strains. CO2 extraction can be used to pull various cannabinoids from the plant such as THCA, CBD, CBG, THCV as well as terpenes and other compounds.
What is CO2 extraction?
CO2 is also unique in that its solubility will change with pressure, allowing for fractioning of the many different types of biomolecules available in cannabis strains. CO2 extraction can be used to pull various cannabinoids from the plant such as THCA, CBD, CBG, THCV as well as terpenes and other compounds.
What temperature can CO2 change to?
The conditions that allow CO2 to change from a fluid state to a supercritical state can occur without having to exceed temperatures above 90°F, meaning there is less risk of compromising the natural volatile compounds found in cannabis.
When did the sc CO2 extraction start?
Supercritical (sc-CO2) extraction has been around for decades, appearing first in the 1980s and 90s as a cleaner and more viable alternative to other methods of separation and extraction. From the decaffeination of coffee and tea to the extraction of essential oils for perfumes, this process has become commonplace in many industries.
Is CO2 a solvent?
As far as non-polar solvents are concerned, CO2 is among the safest. In fact, the FDA has labelled CO2 safe for industrial extractions, making it a much less controversial solvent than petroleum based hydrocarbons such as butane or propane.
Can SC CO2 be refined?
Once a compound has been fractioned using sc-CO2, it can then be further modified and refined depending on the desired outcome. In order to create shelf stable and desirable products for the market, often refinement procedures such as winterization and distillation are incorporated as a secondary process.
Is CO2 safe for cannabis?
The range of CO2-based products can be much wider than other extraction methods when used to its fullest potential. While not always cost-effective, S FE using CO2 has proved to be one of the most versatile and safest methods of producing cannabis concentrates.
How to get a chime out of a vaporizer?
Fill up the tank or atomizer with your cannabis oil. Heat up the oil by continually pressing the firing button. You can also set the temperature of your vaporizer, if this feature is available. Once the vaporizer reached its ideal temperature, you’ll notice that the vapor starts to chime out of your vaporizer.
What is the difference between vaporizing cannabis flowers and vaporizing cannabis oils?
While vaporizing cannabis flowers (dry herbs) gives you a wide range of flavors depending on the strains of your preference , cannabis oils , on the other hand, provide more intense flavor.
What is a desktop vape?
Desktop Vaporizers. These are the most versatile cannabis vaporizers and perfect for home use. They have multiple features that you can tweak to suit your personal vaping style. The downside, they are not discreet and portable due to their larger size.
What is cannabis oil?
Cannabis oils are sticky, gum-like marijuana concentrates extracted from dried buds. It is made up of cannabinoids, such as phytocannabinoid tetrahydrocannabinol (THC) and Cannabidiol (CBD). THC is the prime compound of cannabis that makes it a psychoactive drug.
How is CBD oil made?
The most effective way of manufacturing cannabis oils is by solvent extraction. Ground dried buds are mixed into the oil, completely dissolving the cannabis buds.
What is the most commonly used type of cannabis oil?
The most widely- used type of cannabis oils is CBD-based. These types of marijuana concentrates contain very little THC and a significant amount of CBD. As stated above, CBD is the non-psychotic component of marijuana concentrates and has numerous medical properties.
What is the best device to vaporize cannabis?
Here are some of the popular devices used and their main features: Vape Pens. These battery-powered devices are great entry-level cannabis oil vaporizes. They usually work well with both, oils and waxes. Oils used in vape pens should be liquid enough and not thick to prevent any burnt oils and smoke.
