How to Use the X Max V2 Pro The X MAX V2 Pro Vaporizer turns on with 5 quick pushes on the single button. All 5 LED lights will turn on. Once all the LED lights turn on then turn off, you can change the temperature control setting by clicking the power button 3 times quickly.
Is the xMax V2 Pro A good vaporizer?
If you’re looking for a compact conduction vaporizer, the XMAX V2 Pro is a solid choice, with an inconspicuous look and an interchangeable battery. It isn’t too difficult to get up and running, but our quickstart guide will walk you through the unboxing and setup process, as well as the steps for your first session. Is the XMAX V2 Pro good?
How do I charge The xMax V2 Pro?
You can charge the battery externally or with a micro USB cord. The temperature flexibility of the XMax V2 Pro is average. There are 5 presets to choose between, marked as 356F, 374F, 392F, 410F, and 428F.
What concentrates work best in a vape pen?
Other concentrates are referred to as budder, wax, and sugar, so named for their appearance and consistency also work best in vape pens. These are generally also easier to work with and load on the go.
How do I use The xMax V2 Pro with a grinder?
With the mouthpiece on, and the oven empty, turn the V2 Pro up to 428° F and let it run until the timer causes it to shut off on its own. If you need to, keep running cycles until you don’t smell anything coming off the vape. The XMAX V2 Pro works best with a medium grind, like cracked pepper. Any grinder you might have available will be fine.
How to turn on Xmax V2 Pro?
How long does it take to charge Xmax V2 Pro?
How to fill a V2 Pro?
How do I clean my XMAX V2 Pro?
The glass portion of the glass mouthpiece, bubbler mouthpiece and WPA attachments can all be cleaned with isopropyl alcohol. The chamber of the device can be cleaned by warming it up, holding it upside down and swabbing the inside of the oven with a cotton swab and a drop of isopropyl alcohol.
How do I charge my xmax V3 Pro?
Charging your XMax V3 Pro To charge the device, insert the USB cable provided into the micro USB port on the bottom of the device. An initial charge will take approximately 1.5 hours. It is not recommended to use the device while it is charging to avoid damage to the battery.
How long does xmax V3 Pro take to charge?
It takes 5 hours to fully charge a dead battery in the XMAX V3 Pro vaporizer. It's not uncommon for replaceable battery systems to take this long to charge but I was hoping for something a little faster with the included USB-C charging.
How do I use V3 Max Pro?
Press both temperature buttons at the same time to turn the V3 Pro into an on-demand convection vaporizer. With on-demand mode enabled, the V3 Pro will only heat up to temperature as you press and hold the power button.
How to turn on Xmax V2 Pro?
To turn it on, press the power button three times. This will put it in standby mode, indicated by the blinking lights. Hold the power button for two seconds to engage the heater, which will automatically head for the last used temperature. Hold the button for two seconds to change the temperature. The light next to the chosen temperature will blink while heating, then turn solid when it’s ready. It will turn off on its own after five minutes, but you can press the power button three times to turn it off manually.
How long does it take to charge Xmax V2 Pro?
We recommend charging the XMAX V2 Pro before you use it. This could take as long as four hours the first time, but will take less on subsequent charges. An external charger will charge your batteries a lot faster, but the USB port works fine. The white light will turn on to indicate the V2 Pro is charging, and will turn off when it’s fully charged.
How to fill a V2 Pro?
To fill your V2 Pro, remove the mouthpiece to expose the oven. Loosely fill the chamber, then lightly tamp it down so it doesn’t stick up too far. We recommend using the glass mouthpiece, as it does a better job cooling your vapor, so now would be a good time to switch.
How to burn off a vaporizer?
You won’t want material in there for the burn-off. Press your power button three times in a row to turn it on. The LED will flash and go blank. Hold the button to begin heating. Press the button down for 2 seconds to adjust the temperature. Set it to a max 428 degrees Fahrenheit and let it run. It will shut off automatically after a few minutes and you're good to go!
How long does it take for Xmax to charge?
The X-Max V2 Pro can be charged with the included Micro USB cable. Plug it into an AC adapter and let it charge up! The XMax V2 Pro takes about two hours to charge from empty to full.
ABOUT THE X-MAX V2 PRO VAPORIZER
The X-MAX V2 Pro Vaporizer is a dual-use portable vape that features a ceramic heating chamber that delivers flavorful, dense vapor clouds from your materials. This portable vaporizer is powered by a rechargeable and swappable 18650 li-ion battery that can last 45-60 minutes on a full charge.
HOW TO USE THE X-MAX V2 PRO
Using the X-MAX is simple. It has one button so you can toggle between the five temperature settings (356ºF - 428ºF). To prevent activation during transit, the battery connection has a silicone cover. To start:
How much does a Xmax vaporizer cost?
The XMax V2 Pro is a 2-in-1 vaporizer designed for dry herbs and waxes. It’s most notable feature is the price, coming in at well under $100. For a vaporizer that can handle two materials, that is extremely cheap. In case you are wondering, yes, it does produce actual vapor. Maybe not the most enjoyable vapor in the world, but it’s at least not combusting your herb. Today we’ll take a closer look at its performance to help you figure out if it’s a good deal or not… Also if this is your first vaporizer be sure to check out our Vaporizer Buyers Guide for helpful tips.
How long does the battery last on Xmax V2 Pro?
The 18650 that is included should last you around 45 to 60 minutes on a full charge, but don’t forget that you can always get extras as well.
Is the Xmax V2 Pro pen style?
The portability is also just average with the XMax V2 Pro. While this is technically “pen style”, it’s much bigger than what you would expect. This will fit in your pocket, but it will also cause a noticeable bulge.
Can you use a portable vaporizer with a small lung?
So, if you have a small lung capacity, then you can do well with a portable vaporizer like the Mighty Vaporizer.
X-MAX v2 Pro
The X-MAX Pro made a name for itself with impressive performance and value. Pure flavor and extraction efficiency have never been so affordable.
X-MAX V2 Pro Vaporizer
The X-MAX Pro made a name for itself with impressive performance and value. Pure flavor and extraction efficiency have never been so affordable.
How many clicks to turn on a vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit. The button settings on a vape pen can also be a disadvantage.
What is a single use vape pen?
These single-use pens are generally smaller and even more discreet than their reusable counterparts. Disposable vape pens generally one-piece units, with no removable battery, no refillable heating chamber, and no button (auto draw). Once the oil/concentrate supply is depleted, you can simply discard it.
What is the part of a vape pen that draws vapor?
Mouthpiece: This is the part that you draw the vapor from and attaches to the heating chamber. Charger: Separate from the pen itself, this is usually a micro USB and is used to charge your vape battery. Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced.
How does a vape pen work?
Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced . That vapor is then inhaled through the mouthpiece. Yes, it’s really that simple.
What is the main part of a vape pen?
Most vape pens have the same parts, though some will differ slightly. Battery: This is what powers the device and usually the longest part of the pen. Heating chamber / atomizer: This is where your concentrated cannabis oil, wax, or dry herbs are placed to be heated until they produce a vapor. Attaches to the battery.
What is an auto draw on a vape pen?
Vape pen users have their preferences when it comes to models with activation buttons or “auto draw” (meaning they’re activated simply by inhaling on the mouthpiece). The advantage of activation buttons is that they offer more control over temperature.
What are the benefits of using a vape pen?
There is no combustion, flame, or ash involved in vaporizing. This is both cleaner and better for health. Less odor. Because smoke is removed from the process, less odor is produced, and it dissipates more quickly than smoke. More discreet.
Charge it
Your XMAX V3 Pro will arrive with less than a full charge so let’s top it off before we roll into our first session. Plug it in with the included USB-C charge cable and wait until the battery indicator is full.
Three-button controls
The V3 Pro comes with a single power button and two face buttons for precise temperature control. Everything from current and set temperature, battery level, session timer and more is conveniently displayed on a bright OLED screen.
Burn it off
Once your V3 Pro vaporizer is fully charged, we’ll run a quick burnoff to clear the oven of any remaining manufacturing residues. Triple click the top power button to turn it on and make sure it’s set to session. It’ll say either session or on-demand, right below the battery meter.
Grind and pack
The V3 Pro ’s convection oven thrives with a medium to coarse grind. Stay away from finer grinds. Most grinders shred at a medium consistency so whatever you have should be fine. Take your herbs, ground them up, and fill up the oven. Pack here is important. Pack it too tightly and you’ll get an uneven cook.
Set the temperature - session mode
For this first session, we’ll take advantage of the V3 Pro’s full convection heating with low temp, flavorful hits on session mode. Turn your V3 Pro back on and set the temperature to 390° F (199° C). Once it vibrates, it’s time to hit it!
Hit it!
Take a slow, relaxing draw of about five to ten seconds. Your first few hits will be wispy and flavorful, but will increase in vapor production as you roll through your session. Jump right back in and take slower draws for the best results.
Try on-demand mode
The XMAX V3 Pro also comes with an On-Demand Mode that only heats up when you tell it to. The screen will display either “session” or “on demand” to indicate its current setting. Press both temperature buttons at the same time to cycle between the modes, and set it to on-demand.
How much does a Xmax vaporizer cost?
The XMax V2 Pro is a 2-in-1 vaporizer designed for cannabis and waxes. It’s most notable feature is the price, coming in at well under $100. For a vaporizer that can handle two materials, that is extremely cheap. In case you are wondering, yes, it does produce actual vapor. Maybe not the most enjoyable vapor in the world, but it’s at least not combusting your herb. Today we’ll take a closer look at its performance to help you figure out if it’s a good deal or not… Also if this is your first vaporizer be sure to check out our Vaporizer Buyers Guide for helpful tips.
How does a pen vaporizer work?
This is a pretty basic pen-style herbal vaporizer. The mouthpiece is on the top of the unit, and you remove it to access the heating chamber. The chamber is wide and easy to fill, and it’s powered by a 18650 battery. There’s just one button to cycle the power and adjust the temperature.
Is the Xmax V2 Pro pen style?
The portability is also just average with the XMax V2 Pro. While this is technically “pen style”, it’s much bigger than what you would expect. This will fit in your pocket, but it will also cause a noticeable bulge.
How to turn on Xmax V2 Pro?
To turn it on, press the power button three times. This will put it in standby mode, indicated by the blinking lights. Hold the power button for two seconds to engage the heater, which will automatically head for the last used temperature. Hold the button for two seconds to change the temperature. The light next to the chosen temperature will blink while heating, then turn solid when it’s ready. It will turn off on its own after five minutes, but you can press the power button three times to turn it off manually.
How long does it take to charge Xmax V2 Pro?
We recommend charging the XMAX V2 Pro before you use it. This could take as long as four hours the first time, but will take less on subsequent charges. An external charger will charge your batteries a lot faster, but the USB port works fine. The white light will turn on to indicate the V2 Pro is charging, and will turn off when it’s fully charged.
How to fill a V2 Pro?
To fill your V2 Pro, remove the mouthpiece to expose the oven. Loosely fill the chamber, then lightly tamp it down so it doesn’t stick up too far. We recommend using the glass mouthpiece, as it does a better job cooling your vapor, so now would be a good time to switch.
