The operation is basic- press the fire button to turn the device on or off, then press and hold the button again to vape. The Vape Pen 22 (0. 30-ohm coilhead, A USB charging cable, A silicone vape band I currently discovered one con; Smok didn't supply an additional glass tank for the gadget.
Full Answer
How to use a vape pen battery?
With the O.pen 2.0 you can experience a premium vape pen battery that's going to provide great flavor and big draws from your favorite vape cartridges. It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one. Typically, most vape pen batteries with a button turn on by clicking it 5 times.
What do the LED lights mean on my vape pen?
This lower setting is represented by a cool purple color LED light. Medium - 3.2 volts is perfect for a more flavorful and sizable vape hit, and is shown through a red color illuminating. High - Green lights mean you are at the high setting, which is 4.0 volts.
What kind of vape pens work with THC cartridges?
However, any of the O.pen 2.0 vape pens can work with both prefilled THC cartridges and wax atomizer options that have a 510-thread connection. As previously mentioned, the O.pen changes voltage setting by clicking the stylus button twice quickly. Most vape pen batteries, like the O.pen 2.0, have a timeout setting.
How do I change the voltage on my vape pen?
Once the vape pen is on, which will be indicated with dots lighting up around the bottom of the pen, click the button 2 times to change to the next voltage setting. The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale.
How do you turn on a Smok 22 light edition vape pen?
1.To turn power on/ off: fast press power button 5 times in succession to power on or off, and the white LED light will blink 3 times. 2. Long press the power button to vape, and the LED light will turn white; without atomizer, the white LED light will blink 4 times.
How do you use a 22 Smok pen?
2:535:49SMOK VapePen 22 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipFix.MoreFix.
Why is my Smok vape pen 22 not working?
SMOK Vape Pen V2 Not Hitting Dissemble the tank and remove the atomizer coil. Use a cotton swab to clean the threading at the top of the SMOK Vape Pen V2 and to absorb any e-liquid that may have found its way under the atomizer coil. Reassemble the tank and try again.
How do you activate a Smok vape?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
Why does my SMOK Vape Pen 22 Keep blinking?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output. 3. Low voltage protection: when battery capacity is lower than 3.
How do you know when SMOK Vape Pen 22 is charged?
Ease of Use. When it comes to hassle-free operation, the Smok Vape Pen 22 has many other mods beat. Simply charge the device until the LED indicator stops flashing, meaning that the battery is fully charged.
Why is my Smok vape blinking 4 times?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
How do I unlock my vape pen?
Make Sure The Battery Is Unlocked To unlock or lock an OK Ego Vape Pen battery, simply press the button 5 times in quick succession. The blue LED on the battery's button will flash 3 times to indicate that it has been locked or unlocked.
Why does my vape battery blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
Why is my vape not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Why is my Smok vape not working?
SMOK Wave Not Hitting If your SMOK Wave isn't hitting, the first thing that you should do is try charging the battery. It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod.
ONE BUTTON FOR ALL
Power on/Power off or vaping can be easily done by holding this Power Button.
BUILT-IN 1650MAH BATTERY
With a built-in 1650mAh battery capacity and safety output, Vape Pen 22 Light Edition can be charged via the Micro-USB port easily and allows you enjoy vaping freely.
VAPE PEN MESH COIL
Compared with traditional coil, Vape Pen mesh core has a wide heating area, which can heat evenly and absorb e-liquid effectively, and it ensures you preferable flavor and huge vapor. What's more, the mesh coil has a longer life span.
VAPE PEN STRIP COIL
Strip coil is a fire-new revolutionary coil from SMOK, which is made of Kanthal. It has larger heating area and radiation area, making the heating more evenly and helping the e-juice to heat up quickly. Besides, it can avoid the heat accumulation and the corrosion of heating materials.
AIR SLOT
There are two air slots evenly spaced on the battery top part for airflow.
How long does it take to learn to use a vape pen?
It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one.
How many times does a vape pen battery turn on?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
What to do when your vape is not in use?
Tips for When Your Vape is Not in Use. Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.
What is the dab mode on a vape?
The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale. The first three settings are perfect for those who want to vape without having to press a button, and will vape THC cartridges by simply inhaling.
How long does it take for a vape puff to stop heating?
This means the pen will stop heating the cartridge after a certain amount of time. Most pens will have this occur around 8-seconds.
Can you vape with a 510 atomizer?
The O.pen has evolved into the 2.0 version with multiple temperature settings, including a dab mode. So, you can enjoy vaping your favorite cannabis extracts with your choice of 510-thread wax atomizer. There are many aspects to consider when purchasing a vape pen battery.
Can you take a puff of THC oil right away?
It's important not to take a huge puff right away, this can lead to unwanted side effects such as lung irritation and paranoia. Instead take some small puffs and inhale for only a few seconds, this will allow the coils to warm up the THC oil.
