" " How To Use The Firefly 2 Vape

Vape-FAQ.com

how to use the firefly 2 vape

by Dr. Ezra Jones Sr. Published 1 year ago Updated 1 year ago
image

How to use the Firefly 2 Vaporizer

  1. To use the Firefly 2 vaporizer, lift off the top cover – it’s magnetized and should pull off easily. ...
  2. How much you pack in, and how finely ground it is, greatly affects how the Firefly hits. ...
  3. Sprinkle it into the heating chamber loosely, then gently tamp down with your finger, but do not push it in hard. Be careful not to over pack the chamber. ...
  4. After loading it, place the top back on the Firefly 2. You should feel the magnets pull it into place with a satisfying snap. Now, Ready to Go!
  5. YES! You are now ready to hit your Firefly 2 ! ...
  6. As you hit it, you will notice the flavor change after a few draws. ...
  7. While you are using your Firefly 2, make sure you are always charging the extra battery! ...
  8. After using the Firefly 2 vaporizer, make sure to clean it thoroughly according to the instructions in the box. ...

Part of a video titled Firefly2: How to Get Great Vapor - YouTube
0:34
2:08
Making sure it's fully sealed to begin heating place your fingers on the touch sensors. The LEDMoreMaking sure it's fully sealed to begin heating place your fingers on the touch sensors. The LED blinks green for a few seconds.

How to use a Firefly 2 vaporizer?

Most vaporizers perform best when you grind the materials super-fine. The Firefly 2 is the exact opposite. Instead, you want to use tear the weed with your hands, keep it clumpy, and then add it to the bowl.

What makes the Firefly 2+ different?

The Firefly 2+ gives you total control of your vaping experience with our Desktop and Android companion apps. Choose a temperature between 200°F and 500°F, the widest range available in any portable vaporizer. Phenomenal Flavor. Zero Waste.

How do I get the most out of my Firefly 2?

The key to getting the most from the Firefly 2 is how you draw on the mouthpiece. You want to take long, deep draws that last around 6-10 seconds. It sounds weird, but you quickly get used to it. In contrast, short, sharp draws will deliver nothing in the way of vapor or flavor, so avoid these at all costs.

What devices do I need to use Firefly 2+?

For users who wish to tailor their experience further, you'll need an Android tablet or smartphone or a desktop or laptop computer to use our free Firefly 2+ companion App. The App will allow you to select temperatures between 200°-500° F.

image

How do you use the Firefly vaporizer?

2:354:43Firefly 2 plus Review & How-To - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust press both sensor buttons wait for the light to turn solid green. And then take long slow drawsMoreJust press both sensor buttons wait for the light to turn solid green. And then take long slow draws. This device heats almost instantly to provide on-demand vapor.

What temperature should I set my Firefly 2?

0:000:27Firefly 2+ How to Change Temperature Settings without the AppYouTubeStart of suggested clipEnd of suggested clipAnd tap your left side to set the temperature. If you tap it six times it will go to the highestMoreAnd tap your left side to set the temperature. If you tap it six times it will go to the highest temperature. Settings. If you tap it once it will go to the lowest temperature settings.

How do I know when my Firefly 2+ is fully charged?

Place the Firefly 2 on the charging dock: the LED light blinks blue when charging and turns solid blue when fully charged. For fastest charging: use a wall adapter that is 9 Watts or higher (i.e. tablet adapter) and Firefly 2 will charge the 45 minutes or less.

Can you use the Firefly 2 without the app?

The Firefly App is not necessary to operate the device itself. The temperature can also be controlled directly without the App on ALL Firefly 2+ devices, with 7 pre-set temperatures ranging from 320 to 500°F.

How do you increase heat in Firefly 2?

Tap the left button 3 times quickly (while still holding the right button). This puts the Firefly 2 into “temperature setting” mode. The LED blinks red 1 to 7 times, to indicate the current set temperature. Tap the left button again (while still holding the right button) to set the temperature.

Is the Firefly 2 A good vape?

The Firefly 2 is one of the few devices to actually perform well with concentrates. The temperature goes high enough and melting a glob into the mesh pad allows you to get a dozen nicely sized, very flavorful hits off. Definitely one of the best dry herb and concentrate 2-in-1 vaporizers around in this unit.

How long does the Firefly 2+ battery last?

From each battery it will vary how long it'll last but you should be able to get on average about 5-6 sessions of about 5-10 draws each. So, figure about 25-50 full draws from a full charge depending on how long you pull for and what heat setting you use.

Why is Firefly not working?

If the data in your app isn't refreshing, the first step we would recommend would be logging out of the app and logging back into it. If you're still having problems we would then recommend deleting the app and downloading the latest version from your app store.

How do you adjust the temperature on a vape pen?

How do I change the temperature of my G Pen Pro Vaporizer?Once the G Pen Pro Vaporizer has been powered on, you can cycle through its three temperature settings by simply holding the power button for three seconds. ... Low (Blue) - 375° F / 190° C.Medium (Green) - 400° F / 204° C.High (Red) - 428° F / 220° C.

How do I connect my Firefly to my Iphone?

0:000:52Firefly 2+ How to Use the App - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the touch sensors on your Firefly. 2 plus. Then press the connect button on the app the LEDMorePress the touch sensors on your Firefly. 2 plus. Then press the connect button on the app the LED light on the device should blink blue while pairing to set your maximum vapor temperature.

How to vape concentrate with Firefly 2+?

To vape concentrate with the Firefly 2+, either download the Firefly app and use the “Concentrates” temperature setting, or set the temperature manually from the device. Follow the same steps as flower vaping. Pro tip: Be sure to take an extra long hit from your concentrate bowl on the first inhale.

What is firefly 2+?

While this works, it can result in uneven vaporization. The Firefly 2+ uses convection heating, meaning the air is preheated before it passes through the material , preserving terpenes, ...

How long does it take for a firefly to turn off?

Continue to hold down the touch sensors while you inhale for ten seconds. After 30 seconds of holding the touch sensors, the Firefly will turn off automatically.

How to use a touch and glow vape?

Using the device's “touch and glow” heating feature, place your fingers on the touch sensors on either side of the vape — without pressing down or using force — to start heating. The LED light will blink two times to indicate it's heating up, then turn solid green.

How to charge Firefly 2+?

The Firefly 2+ comes with a proprietary charging dock. To charge, plug the cable into a USB adapter and connect to the charging dock. When placed on the dock, the device's LED light will begin blinking blue to indicate charge, and solid blue to indicate it's ready for use.

When did Apple remove the Firefly app?

Unfortunately, on November 15th, 2019, Apple removed all vaporizer apps from its store. Firefly apps that were downloaded before removal will still work but cannot be updated, but Android users are not affected.

Can you put flower in Firefly 2+?

When packing flower into the Firefly 2+, you want it to be ground coarsely, much like what you would use for a joint or a blunt. If the grind is too powdery, it can pull through the vape. It's also important to note that when the glass chamber is filled to the top with flower, it shouldn't be packed too tightly.

How to charge a Firefly 2+?

It’s best to fully charge your battery before the first use. Plug the micro-USB end of the charge cord into the charging dock, and the other end into a USB charge port. The good news is, the Firefly 2+ charges quickly. It charges in less than two hours plugged into a computer, but you can shorten that wait time to 45 minutes or less by using a wall charger with the USB charge cable. The Firefly’s light will flash blue when charging, and turn solid blue when it’s ready to use.

What is the best grind for Firefly 2?

Medium to coarse grind. The Firefly 2+ works best with a chunkier grind, on the medium to coarse side. If you grind too finely, the hot air can create tunnels through the herb, and blow herbs into the vapor path, ruining the vapor. The goal is to keep the herbs from moving around in the bowl.

How to extract herbs from a firefly?

After two or three hits, open up the lid and stir the bowl with something like a toothpick. Push the herbs back into the bowl, put the lid back on, and take the next hit at your leisure. If you can’t find anything to stir with, wait for the herbs to cool down a little, then try dumping the herbs onto your palm, and back onto the Firefly. This is a convection vaporizer, so you’ll have to stir at some point to get an even roast, and full extraction. Stir at different times with different sessions, and find what works best for you

How to draw a firefly?

Cradle the Firefly in one of your hands with the light facing up, so that you can touch both buttons with your thumb and middle finger. It should feel like you’re lighting a Sherlock pipe, or speaking into your phone’s microphone while on speaker. The Firefly 2+ is ready to hit in three seconds. Continually touch both buttons simultaneously, and wait for the third blink that stays solid green. Keep touching the sensors throughout your draw.

How long to draw vapor?

Continue your draw for at least ten seconds. Slow and steady is the best pace. The longer you draw, the thicker the vapor will get, as the temperature increases. It will time out after 30 seconds, which is probably longer than you’ll last. When you’re done, let go of the buttons, enjoy the taste, sit back, and relax!

How to Use Firefly 2 Vaporizer

Opening your own Firefly 2 Vaporizer is considered to be an aesthetic delight you could have. But, how are you going to get the most out of one of the best vaporizers? Here are some of the best tricks and tips on how you can make use of Firefly 2 Vaporizer. Well, it’s not as difficult as you think for as long as you are going to follow this guide.

Firefly 2 Dry Herb Vaporizer Steps

To make use of this Firefly 2 Vaporizer, you need to lift off its top cover – it is known to be magnetized and needs to be easily pulled off. Then, your chosen dried herbs will be placed on the circular type of heating chamber.

Why do you start off low in Firefly 2?

You want to start off low because different temperatures deliver different elements from the herb. It also ensures you don’t max-out your materials right away. Running the Firefly 2 this way ensures you get the absolute maximum from each bowl and nothing is wasted.

Can you pack bowls in Firefly 2?

With the PAX 3 and the DaVinci IQ, you can get away with loosely packed bowls. The FireFly 2 requires you to pack things in quite tightly, however, as this ensures the material is heated correctly.

How to pack a firefly 2?

1) Pack The Bowl Properly. The Firefly 2 is a convection vaporizer. This means you need to ensure you pack the bowl correctly. Normally, this means not over packing. But here, more is better. You want to pack the bowl as tightly as possible. Try to make sure it is flush with the top lip of the oven. Once you’ve done this, clear away any excess ...

How long does it take to draw Firefly 2?

The key to getting the most from the Firefly 2 is how you draw on the mouthpiece. You want to take long, deep draws that last around 6-10 seconds. It sounds weird, but you quickly get used to it.

Can you use Firefly 2 while hiking?

OK, this is easily the most annoying thing about the Firefly 2 – especially if you use it while hiking or walking the dog. You have to stir up the materials mid-way through a bowl.

Does Firefly 2 shut off?

The Firefly 2 features auto-shutoff; basically, this means that when you’re done vaping on it the device will automatically shut off, saving you precious points on the battery life front.

How to activate Firefly 2+?

There is no power button on Firefly 2+. To activate the heating sequence, place your fingers on the touch sensors located on either side of the device. To stop heating, remove fingers from touch sensors. While the heating sequence is activated by the sensors, no heat touches your flower or concentrates until you start to draw.

What is a firefly?

The Firefly is a true portable convection vaporizer. Convection heating produces the highest-quality vapor by pre-heating the air before it passes through the material, which is the optimal method for extracting the most flavors and active ingredients.

Why is the draw on Firefly so long?

Because each draw from Firefly has a broad temperature range, it delivers more of these ingredients and flavors than any other vaporizers. As you inhale, the temperature climbs from room temperature to over 400°F, releasing each ingredient as the temperature rises. This is why each draw on a Firefly is slightly longer.

How long is the warranty on Firefly?

provides a limited warranty on the Firefly TM device against defects in material and/or workmanship under normal use for a period of (2) years from the date of purchase. This limited warranty is transferrable.

How long does it take to return a Firefly?

We accept returns of most Firefly purchases within 7 days of the original delivery date, less a 15% re-stocking fee. The product must be unused and in its original factory-sealed condition to be eligible for return. We cannot accept any returns of any used products unless it's determined by our Customer Service Department that the item may be defective in some way. All returns must be accompanied by a Return Materials Authorization (RMA) number; otherwise, they will be refused and returned back to the shipper. If your Firefly unit is not working, please take the following steps for resolution. Please note: the warranty inspection and repairs process can take from 10-14 business days, depending on scheduling and the availability of parts required.#N#The Firefly can only be shipped within the U.S. and Canada. Warranty service and returns will only honored within these geographical locations.

What is the challenge of vaporizing plants?

The challenge in vaporizing complex plants is the dispersion of activation temperatures.

How does a firefly glow?

The Firefly's glow is produced by the heating element glowing through the borosilicate glass heating chamber. Much more than an LED or digital display, it creates a sense of connection to the vaporizing experience since you see the real power and heat that creates your vapor.

What is Firefly 2+?

The Firefly 2+ is the only vaporizer that heats dynamically across a wide range of temperatures with every inhalation. As you draw, the air temperature is increased up to your set maximum. This delivers every molecule directly into your breath the very moment it vaporizes. You can taste and feel the difference.

What happens when you draw firefly 2+?

As you draw, the air temperature is increased up to your set maximum. The Firefly 2+ is the only vaporizer that heats dynamically across a wide range of temperatures with every inhalation. As you draw, the air temperature is increased up to your set maximum.

How long does vapor stay in your body?

Vapor That Stays in Your Body. Since the inhalation is designed to last for 10+ seconds, the vapor droplets have time to deposit onto the inner surfaces of your lungs, where they can be absorbed into the bloodstream.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9