- Unscrew the coil and place it to one side.
- Now it’s time to fill it with juice. ...
- It’s also a fairly tight squeeze getting your juice in, so take your time and rest the tip of your juice dripper on the glass and slowly pour the eliquid ...
- Depending on the size of you juice dispenser, the tank usually fills after four or five loads.
How do you use a vaporizer?
Press the fire a button for a second or two before breathing in and you’ll notices the vapor will be a lot warmer. I found that the best technique for me is pressing the fire button for a sec, take a couple of quick puffs, re-fire the button and then take a lung hit. When I figured this out, it made a world of difference.
How do you use the Aspire pockex vape mod?
How to Use the Vape Mod Aspire PockeX With the PockeX’ battery charged and its tank filled, the device is ready to use. To unlock the device and turn it on, simply press the fire button five times in succession (same goes with turning it off). The indicator light will then flash three times, indicating that it is ready for vaping.
How do you use the fire button on a vape?
To unlock the device and turn it on, simply press the fire button five times in succession (same goes with turning it off). The indicator light will then flash three times, indicating that it is ready for vaping. To take a hit, just hold the fire button and once you’re done, just release the fire button.
How do I use the Aspire Nautilus vaporizer?
Now you can attach the Aspire Nautilus vaporizer to your battery of choice and begin vaping. While in this phase you use the Airflow Adjustment Ring to help give your hits more or less warmth and strength. You can do that by twisting the Airflow Adjustment Ring clockwise or counterclockwise.
Why is there no smoke when I vape?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
Why is my Aspire vape flashing orange?
A flashing orange light around the PockeX fire button indicates a low battery and will signal that the device needs to be recharged.
How do I change the settings on my Aspire vape?
2:395:48Aspire Zelos 50w Kit - Overview & User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the 1.8 own call fitted between nine and ten watts is a good starting point press both the fireMoreWith the 1.8 own call fitted between nine and ten watts is a good starting point press both the fire button and plus button simultaneously to lock the values or power settings from being altered.
How do you know when aspire PockeX is fully charged?
While the device is on, the LED light will indicate the PockeX's charge level, when the battery charge is above 30%, the light will be blue; When the battery charge is less than 30%, the LED light around the fire button will be pink.
How do I know when my vape is charged?
Simply connect the pen battery to the charger and insert into a USB port on a computer or other electronic device. The light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
Why is my vape pen blinking when I hit it?
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
What is SS mode on vape?
SS can be used in wattage or temperature control mode. Nickel 200: commonly known as ni200, it was the first temperature control coil but it's less common now due to some vapers having sensitivities to nickel. Titanium Grade 1: otherwise known as Ti.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
How long do coils last in Aspire PockeX?
Coils generally last between 1 to 4 weeks but could be extended if the coil is broke in properly and when good care and maintenance procedures are practiced. One thing to monitor is when the coil heats up and there is a noticeable burnt taste to the vapor that the PockeX produces when it is used.
How long should I charge my Aspire PockeX?
How long does the Aspire PockeX AIO battery take to charge? If you are charging it for the maiden time, it will take 4 hours to get the 1500mAh battery up to full charge. However, the rest of the charges won't take that long.
Is the Aspire PockeX mouth to lung?
Charge the device with a USB cable, fill the tank and you're ready to go. One aspect of the Aspire PockeX that makes it a perfect choice for new vapers is that it is designed for mouth-to-lung inhaling. When you use the device, in other words, you'll draw the vapour into your mouth before inhaling it.
How to turn on a vape?
To turn on the device, press the fire button five times consecutively and repeat this process if you want to turn it off . The indicator light flashes three times to show you that it is the moment to vape.
How long to let a vape settle down?
Use the max line to guide you on how much you need to vape to avoid chances of leakages and spitting issues. After putting your liquid, you will need to let your device settle down for 10 minutes to give a good hit, flavor, and vapor.
What is the coil on an Aspire?
The Aspire PockeX coils create a good combination of stainless steel wires and organic cotton. The U-tech coils have a good way of diverting airflow to allow for the recycling of the drawn air twice through the coil for an unparalleled flavor and huge clouds of vapor. You have the option of choosing between two coils. Either the 0.6ohm coil for more vapor or the 1.2ohm coil for more flavor.
What is an Aspire pen?
The Aspire PockeX is an all-in-one vape pen from the Aspire vape company. This pen is from the Aspire series, where we have other pens like the Aspire K lite and the Aspire K2. Since Aspire is a pioneer in building AIO products, they did a good job with PockeX. The pen is compact, sturdy, and ergonomic.
How many mAh does the Aspire Pockex have?
The Aspire PockeX comes with a 1500mAh battery that has a bypass output. You are allowed a 30-day warranty on the battery from the day of purchase. The battery level indicator is found on the button and it can change its color concerning how much battery percentage you have left.
How much does an Aspire Pockex weigh?
The device is simple to use and will win the hearts of people after a ruthless mod. With its small size, it comes at 86 grams, and it is very pleasant to handle and use. Its build is excellent and does not come off as stressful to use.
How long does it take for a vape to charge?
To charge the unit, plug in the micro USB charger at the port located at the bottom. Within an hour and a half hours, your vape will be ready to go.
How to use a vaporizer with a 5 head?
The wire in those .5 heads is very thick. It takes a bit for the coil to heat up sometimes, especially if the battery is running low. Press the fire a button for a second or two before breathing in and you’ll notices the vapor will be a lot warmer. I found that the best technique for me is pressing the fire button for a sec, take a couple of quick puffs, re-fire the button and then take a lung hit. When I figured this out, it made a world of difference.
How much juice does the Aspire Atlantis hold?
Now it’s time to fill it with juice. The Aspire Atlantis holds 5ml, but it fills up quickly, so be careful.
How to get juice out of a wick?
You can get that juice out by removing the drip tip, placing a folded paper towel on top of the tank, keep it wrapped tight around the tank, then turn it up-side-down and quickly swing it towards the ground. This drains out those juices that were hanging out and giving you a bad time.
Is Aspire a sub ohm vape?
It is also one of the best looking sub-ohm vape tanks around. Period. And – because it’s Aspire – you know you’re supporting American workers, as Aspire is based in the States. Double bonus!
Can you run a senseblazer 200 as an RBA?
You can also run the Sense Blazer 200 as an RBA (though that bit comes separately).
Does Aspire Atlantis V2 have manuals?
As noted in our Aspire Atlantis V2 Review, you get pretty much sweet FA with respect to instructions inside the Aspire Atlantis box. It’s just the tank, some coils and that’s about it – no user guides, no manuals and no safety information. This is rather perplexing for a number of reasons, but mostly because it assumes the buyer is a seasoned player, whereas a lot of people using it will not be.
What Is The Aspire Nautilus?
The Nautilus is an eLiquid only vaporizer. Before we can explain how to use it though, we must explain how it works.
Where do you put eliquid in a tank?
When filling the tank do not drip the eLiquid into the Tube Body in the center of the tank. This will cause the eLiquid to go straight into the mouthpiece. Instead, drip your eLiquid into the Glass Tank.
How long does the fire button on a Pockex vape pen last?
Two things could be done with the fire button — firing and locking the vape pen. The PockeX features pass-through mode and a 10-second automatic cutoff time which basically stops it from firing for more than 10 seconds at a time.
What coils are in a vape kit?
Two different coils come in the basic kit — a 0.6ohm one and a 1.2ohm one. The 0.6ohm coil (stainless steel) is for sub-ohm vaping and produces what one needs while not eating up the device’s battery life.
How much does a Pockex vape weigh?
With its small size and weight of only 86 grams, handling it is pleasant.
What is included in the atomizer kit?
The kit comes with the device itself with a 0.6ohm atomizer pre-installed, a replacement 1.2ohm atomizer, a micro-USB cable for charging, a user manual, and a warranty card.
Where is the airflow hole on a vape?
The device has a non-adjustable airflow which helps on making it super compact. The airflow holes are located under the top cap and the airflow is nice and is suitable for DTL vaping or lose MTL vaping.
Is the Pockex a good vape?
Its build is the first rate with silky-smooth connections. The vape feels premium and classy to the touch, it really is a very nice looking vape kit.
Is the Smok Stick V8 adjustable?
The voltage on this device is not adjustable and it only delivers voltage based on the battery’s charge state. The Smok Stick V8 is single button operated and its pen-style design makes its portability good — one can easily toss it in their pocket. Its slim design comfortably fits in one’s hand and is easy to hold during a session. The V8 comes in a variety of colors, too, ranging from black to rainbow. The device also comes with a suite of safety features such as its eight-second puff timer to prevent accidental firing and overheating, short-circuit protection, and much more.
How to turn on Aspire AVP?
How To Turn The Aspire AVP ON/OFF: Press the mode button five times quickly to turn the device ON. You’ll see an LED light flash white three times to indicate that the device is now on. Repeat the process to turn the device OFF.
Who is Blake from Guide to Vaping?
Blake is the owner and creator of the Guide To Vaping blog. He has expressed his passion for the vaping industry through his deeply rooted and highly informative content. Being a writer and content provider for the vaping industry for year's, Blake has also gained experience from working with multiple blogs and well respected companies.
What is AVP AIO?
The Aspire AVP AIO Kit is a fascinating device that has been created by one of the industry’s most iconic brands. Just like past devices, it’s made with outstanding quality using zinc and aluminum alloy materials for its chassis, while a carbon fiber inlay is present on both the front and back of its panels for enhanced appeal. The Aspire AVP AIO only stands just 82mm by 39mm by 14mm, making it very compact and portable. It comes with an integrated 700mAh rechargeable battery, allowing it to deliver a wattage range of 8W to 12W. It utilizes a power adjustment button to change from 8W to 10W to 12W and even features a bypass mode for times when charging. Believe it or not but the AVP Kit has a draw-activated firing mechanism, so you’ll never have to fool with a button just to vape. The pod has a 2ML e-liquid capacity and features a bottom fill system and a Nichrome 1.2-ohm integrated coil.
How to secure a lanyard to a pod?
On the side of the device, there is an eyelet where you can insert a part of the lanyard through. Secure the lanyard to the edge of the device by making a loop and attaching the end of the loop over the hook/peg next to the eyelet. Next, pull the lanyard to tighten. Then insert the pod to continue use. Advertisement.
How to fill a pod with liquid?
How To Fill The Pod With E-Liquid: First remove the pod from the body/housing of the device. Turn the pod upside down and locate the filling hole. Pour e-liquid into the pod until filled. Flip the pod back to its upright position and place it back into the body.
Does the AVP pod burn up?
I have the AVP for almost a year now and tends to work great. It does not burn up easily like the other smok pods that i have and the battery almost last all day. Only downside i have noticed over time is the metal casing that the pod sits in must get bent or stretched as i have to wiggle the pod around sometimes or push down to get a connection when taking a draw.
Is AVP easy to use?
While the AVP (Aspire Vape Pod) is very easy to use and operate, there are users that are unfamiliar with vaping devices or experience an issue while using it. Hopefully, by sharing this information, you will be able to properly use the Aspire AVP or fix an issue you may be having with the device.
