Simply press the button and inhale while keeping the button depressed. Some vape pens, especially those for use with cannabis oils, may not have the button, so all you need to do is inhale (known as “auto draw”). Small sips are generally the way to go, so avoid inhaling as hard and as deep as you can.
Full Answer
How do I use the ooze vape pens?
Just follow the Ooze rule of thumb: use a lower temperature for oil, and crank up the heat for wax and thick concentrates. Because our versatile vape pens can be used with different materials, it’s important to make sure you’re setting it up for success.
How do I preheat my vape pen?
Just load your dab into an atomizer or 510 thread cartridge and attach it to the pen. Start the temperature somewhere between 3.8V and 4.1V. Run one cycle of the pre-heat mode. Click the button on the device twice and let it run without clicking it again. The pulsing light will indicate if it is still preheating.
How to use a vape pen battery?
With the O.pen 2.0 you can experience a premium vape pen battery that's going to provide great flavor and big draws from your favorite vape cartridges. It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one. Typically, most vape pen batteries with a button turn on by clicking it 5 times.
Can you use wax in a vape pen?
Using wax in vape pens can be a bit more of ‘trial and error’ than oil since it’s thicker and the consistency tends to vary. Some forms of wax just need more heat to get them going, so keep this in mind every time you pick up a fresh batch.
How do you use a glass vape pen?
Essentially, just unscrew the the mouthpiece, pull it off, fill the glass cartridge with your oil (using a syringe or dropper), then replace the mouthpiece and screw it on firmly. Then you're good to go!
How do you use the ooze vape pen cartridge?
1:532:53Ooze Pen Instructions Slim Twist PRO 101: How to Use Battery (Unboxing ...YouTubeStart of suggested clipEnd of suggested clipSimply take your battery. And screw off the quartz wax tank. We recommend you inspect the thread ofMoreSimply take your battery. And screw off the quartz wax tank. We recommend you inspect the thread of the battery. And the cartridge thread before screwing it up. Once you have screwed on the cartridge.
How do you use the Ooze 900 vape pen?
0:331:47900 Battery 101: How to Use Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn turn the battery on by clicking it five times within 2 seconds. It will flash green indicatingMoreIn turn the battery on by clicking it five times within 2 seconds. It will flash green indicating the edges on the 900 battery has a 20 second hold and runs at 3.7 volts.
Do ooze pens work with all cartridges?
If you like to fill your oil cartridges yourself, the Ooze Duplex vape pen for oil is the perfect option for you! This vape kit includes an empty oil cart that can be filled with your own concentrated oil. Plus, it is also compatible with all 510-thread oil, extract, essential oil, and delta 8 cartridges.
Why is my vape pen not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How do you smoke wax out of an ooze pen?
Attach the coil to the vape battery and load your dab onto the coil. Screw on the discreet reaction chamber. Turn your pen on (click 5 times), hold the button, and inhale the vapor!
Why is my ooze pen blinking when I hit it?
There may be a connection issue indicated by a green light that will blink 4-5 times. Connection issues can happen when a cartridge leaks or you are using an irregular-sized cartridge.
What voltage should I set my ooze pen to?
For pre-filled oil cartridges, set your pen to 3.3V. Prefilled 510 thread cartridges require lower temperatures because the material is thinner and easier to heat. We recommend starting at the lowest voltage, 3.3V, and moving up to 3.8V if it's not giving you enough of a hit.
What happens when you double click an ooze pen?
If you use an Ooze vape pen regularly, you know that it's 5 clicks to turn on/off, 3 clicks to change the temperature setting, and 2 clicks to activate preheat mode.
Do you have to turn ooze pen off?
Along with using the included Ooze Smart Charger and keeping your device clean, we recommend turning off your battery between uses. Each tip we provide will extend the life of your battery and prevent any mishaps that come from overheating.
What is a vape pen?
Vape pens are a great alternative to burning CBD or marijuana flower due to their convenience, cleanliness, portability and odorless vapor. If you just need a quick hit, vape pens allow you to get instant relief with a quick press of a button—all without having to grind and pack a piece.
How to run wax in preheat mode?
Preheat mode runs at a lower voltage than when actually pressing the button down , so only run it if your wax is super thick and clogged, or for a hands-free experience. Double-click the button to run it and take a hit!
How to get wax to work?
Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment , set the voltage at 4.0V. Take a hit and expect a big cloud with crystal clear terpene flavors. If you’re really having trouble getting a hit even at 4.0V, turn it up to 4.3V or run one cycle of preheat mode by double-clicking the button. On the other hand, if your dab tastes burnt, dial it back a bit.
Can a USB charger overcharge a pen?
Other USB chargers can easily overcharge your battery, weakening the cells inside over time. This is because other chargers continue to charge the battery, even when the charge is full. If you charge your pen overnight like most, you can easily degrade your battery in just a few months. The Smart Charger automatically stops supplying energy to the battery as soon as it’s fully charged.
Can you crank the temperature up on a slim twist pen?
Wax users—don’t be afraid to crank the temperature up a few notches. If you use oil or a thinner concentrate, your pen should be good to go right out of the box.
How to protect a vape pen from kids?
Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.
How long does it take to learn to use a vape pen?
It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one.
What to do when your vape is not in use?
Tips for When Your Vape is Not in Use. Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.
How many times does a vape pen battery turn on?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
What is the dab mode on a vape?
The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale. The first three settings are perfect for those who want to vape without having to press a button, and will vape THC cartridges by simply inhaling.
How long does it take for a vape puff to stop heating?
This means the pen will stop heating the cartridge after a certain amount of time. Most pens will have this occur around 8-seconds.
What is the best voltage for a vape?
Medium - 3.2 volts is perfect for a more flavorful and sizable vape hit, and is shown through a red color illuminating.
