The Koko can use original 1.4ohm Caliburn pods. The Koko has a 520mAh battery and an 11W maximum wattage output — the same as the Caliburn. It's a draw activated device so there are no buttons; simply inhale on the mouthpiece to vape.
Is the Koko the best pod vape system on the market?
The KOKO is a follow-up to the hugely popular Caliburn pod released in 2019 – often touted as the #1 pod vape system on the market to date! I have nothing but good things to say about UWELL – I reviewed the original Caliburn earlier this year and was so impressed I included it in our pick of the best pod vape systems money can buy.
What is the uwell Caliburn Koko vape?
The Uwell Caliburn Koko vape is a pared-down version of the Caliburn pod mod system. The device is square-shaped and has a tiny, lightweight frame. The build features aluminum alloy and plastic with no buttons anywhere on the pod mod. The Koko vape uses a 2ml juice pod that plugs into the top section and is draw-activated.
What size battery does the Koko vape use?
The Koko vape uses a 2ml juice pod that plugs into the top section and is draw-activated. The internal battery has a 520mAh capacity and uses USB charging with a port on the base of the unit.
How do the pods work on the Koko?
The pods slot easily into the top of the KOKO and are held in place by two small magnets on the underside of the pod. As with the original Caliburn, the magnets do a good job of keeping the pod secure but you’ll need to give the pod a firm press until it clicks into place otherwise the draw activation won’t work.
How do you smoke a Koko vape?
1:526:01The NEW Caliburn KOKO By Uwell! - YouTubeYouTubeStart of suggested clipEnd of suggested clipMan this thing right here is easily as good as the original Caliburn easily the draw off this manMoreMan this thing right here is easily as good as the original Caliburn easily the draw off this man you can do mouth lungs in the cum. Man the mouth the lungs are comfortable.
How do I know when my Koko is fully charged?
Just plug the supplied charging cable into a suitable USB outlet and insert the cable into the USB port on the KOKO. The battery LED indicator will flash while the KOKO is charging – red, blue and green depending on the battery level. When it's fully charged, the LED will stop flashing and stay green.
How do you put Flavour in Koko vape?
1:001:58UWELL Caliburn KOKO Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by removing the top cap like so to reveal the fill holes then carefully insert your a liquidMoreStart by removing the top cap like so to reveal the fill holes then carefully insert your a liquid nozzle and gently squeeze.
Why is my caliburn Koko not hitting?
Usually when your Caliburn is not producing any vapor – wether you are just inhaling or using the button, it is most likely flooded. Remove the pod, and use a cotton swab to gently clean the bottom of the surface.
How long does Koko need to charge?
40-45 minutesThe Koko Prime charges from completely dead to a full charge in 40-45 minutes.
How long does Koko battery last?
The Caliburn Koko has the same 520mAh battery as the Caliburn which, to be honest, is a little disappointing. Battery life is still decent but even an upgrade to 600mAh would have been nice. As it stands, I'm getting a pod and a half out of a full charge. That's a day and a half of use.
Can I use regular vape juice in a caliburn Koko?
Vaping the Caliburn Koko The consistent power output of the battery ensures quality vapor production with every pull. The coil type also makes the pods compatible with different kinds of e-juice (freebase nicotine, nicotine salt) so users can use as many e-juices as they want with various nicotine levels.
How long does Koko pods last?
Battery. The internal battery of the Koko AK2 is 520mah in size, just like the Caliburn A2, which is pretty small, but considering you are using a high resistance pod with it, you'll get a full day of vaping out of it easily. Plus it charges pretty quick due to the small battery size.
Is Koko vape good?
Uwell's Caliburn Koko Pod is a brilliant, compact and discreet pod that delivers great flavours with indirect inhalation. It's easy to use, practical, and almost perfect. For occasional vaping or when you're out and about, it is the best solid little pod right now.
Why is my caliburn blinking blue when I try to hit it?
If your Caliburn is blinking blue, it probably means that the battery level is medium and low. A good way to control your smoking habits is to limit the number of puffs you take so that your battery can last longer.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
Why isn't my caliburn working?
The most common reason your UWELL Caliburn is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The UWELL Caliburn is shipped in a locked position to prevent accidentally turning on during shipment.
How long does caliburn Koko battery last?
Battery. The internal battery of the Koko AK2 is 520mah in size, just like the Caliburn A2, which is pretty small, but considering you are using a high resistance pod with it, you'll get a full day of vaping out of it easily. Plus it charges pretty quick due to the small battery size.
Why is my caliburn blinking blue when I hit it?
When your Caliburn is blinking blue, it usually means that the remaining battery cost is 30% to 60%. However, if you catch it blinking only three times, then it means that the link to the heating coil has been lost.
How long do caliburn Koko pods last?
between 1-2 weeksWhen should I replace my Caliburn pod? Caliburn pods tend to last between 1-2 weeks, though this depends on use. The most common sign that your pod needs changing is a slightly burnt taste.
Is Koko a good vape?
Uwell's Caliburn Koko Pod is a brilliant, compact and discreet pod that delivers great flavours with indirect inhalation. It's easy to use, practical, and almost perfect. For occasional vaping or when you're out and about, it is the best solid little pod right now.
What is a Koko Prime Kit?
KOKO Prime Kit is a top refilling pod system kit that is known as an upgraded version of Uwell KOKO. This post will teach you how to use it clearly.
How many times does the green light on a vape stop?
After 8 seconds of vaping, the green light flashes 5 times to indicate the timeout and automatically stops the output.
How to fill a pod?
How to fill the pod#N#a. Install the coil to the pod.#N#b. Install the pod on the body.#N#c. Remove the drip tip.#N#d. Fill the e-liquid.#N#e. Put the drip tip back on.
When installing a pod to a device, if the air inlet of the pod and the air inlet?
When installing the pod to the device, if the air inlet of the pod and the air inlet of the device is close to each other, the airflow is suitable for restricted direct-to-lung vape.
How many pods does a Koko kit have?
The Koko kit comes with two pods, one rated for 1.2ohms (red base), the other rated at 1.4ohms (black base). The 1.2ohm pod comes pre-installed. The pods have gold-plated contacts on the base, as well as two magnets to secure a connection with the battery section.
How many mAh is a Koko battery?
The Koko has an internal 520mAh battery, which is the same capacity as the first Caliburn cell. The Koko can output a maximum of 11W, while the voltage range goes from 3.2 – 4.0V.
How wide is the Caliburn Koko?
The Caliburn Koko pod mod is a smaller version of the original Uwell Caliburn that has a longer shape and stands at 110mm (4.3”). The Koko stands at 67mm (2.6”) and is 12mm (0.4”) wide, so it is very concealable and pocket-friendly. The outer chassis features lightweight aluminum alloy with plastic elements, so the device is durable without being too heavy.
What is a Caliburn Koko?
The Uwell Caliburn Koko is a pared-down version of the Caliburn pod mod system. The device is square-shaped and has a tiny, lightweight frame. The build features aluminum alloy and plastic with no buttons anywhere on the pod mod.
What is the coil rated for a Mico?
The Mico uses two pod types, however. Users can opt for a regular, MTL pod with a coil rated at 1.0ohms, or they can switch to a mesh-style coil that has a coil rated at 0.8ohms. The pods use side-fill ports with rubber stoppers to prevent leaking, and they also have magnetic connections like the Koko pods.
What is the drip tip on a Pod?
The drip tip comes off, which is how users fill the pods with e juice. There is a barely visible fill-line marker on the outside of the pod to help guide users, although it is hard to see.
Where is the pod bay on a Koko?
The pod bay sits atop the unit, and the mouthpiece juts out when it is in place, which is the only part of the Koko that sticks out. Along the top side, there is a thin opening that lets users see the juice level of the pod inside the unit. There are two holes on the side of the unit. One is for airflow.
What is a koko?
The UWELL Caliburn KOKO is the latest pod vape released by the Chinese based company Shenzhen UWELL Technology. The KOKO is a follow-up to the hugely popular Caliburn pod released in 2019 – often touted as the #1 pod vape system on the market to date!
How do I change the KOKO pods?
Replacing the KOKO pods is super easy – just remove the used pod and insert a fresh one!
How big is a Caliburn Koko?
It’s sleek, compact and lightweight – a small, square shaped pod vape with dimensions of 67mm x 43mm x 12mm, including the 1.2ohm pod!
How do the pods fit on a Koko?
The pods fit comfortably into the top of the KOKO and are held in place with two small magnets. Just be sure to give the pod a little extra push to make sure it’s fully connected to the spring loaded contact points. I’ll show you how to replace and fill the pods further down.
How to fill a pod with e juice?
The pods are really easy to fill – you just remove the black plastic mouthpiece and insert your e-juice bottle into one of the fill ports.
What color is the battery indicator on a Koko?
The battery LED indicator will flash while the KOKO is charging – red, blue and green depending on the battery level. When it’s fully charged, the LED will stop flashing and stay green.
Is Koko compatible with Caliburn?
UWELL designed the KOKO to be compatible with the original Caliburn pods which is a really nice touch. I had a bunch of Caliburn pods lying around so I was able to try both the 1.4ohm and 1.2ohm pods in the KOKO – they fit perfectly and work like a charm.
Why does my Uwell vape taste burnt?
One of the most unpleasant things that you can experience when vaping is a harsh burned taste, and the most common reason for a burned taste with the Uwell Caliburn is vaping too soon after filling the pod for the first time. The Caliburn pod has a cotton wick, and the wick can burn if you attempt to vape before the wick is completely wet. If that happens, you’ll never get a good flavor from that pod because there’s no fix for a burned wick. After you fill a new pod for the first time, wait at least five minutes before vaping.
How to fill a pod with e-liquid?
When you remove the pod’s mouthpiece, you’ll see two filling holes alongside the pod’s center air tube. Position the nozzle of your e-liquid bottle over either filling hole and add e-liquid until the pod is almost full. Leave a little room for air at the top; if you overfill the pod, it may gurgle or leak.
What was the first pod system to use a cotton wick?
In addition to the winning combination of price, size and performance, the main claim to fame of the Uwell Caliburn is that it was the first pod system to use a true tank-class coil with a cotton wick as opposed to the smaller coils with silica wicks that most pod systems use.
