Using your Dr. Dabber Vaporizer Pen
- Once you’ve loaded your atomizer properly, re-attach the mouthpiece/airflow shaft to your atomizer, and you’re ready to...
- Simply put the mouthpiece to your lips, press the button and inhale for 4-6 seconds. You’re welcome to hold down the...
Why buy a Dr Dabber vaporizer?
When you buy a Dr. Dabber vaporizer, you can rest assured you are getting top quality backed by top support. It’s as simple as that.
Is the Dr Dabber Stella the best vape pen for You?
With that being said, Dr. Dabber Stella might be one of the appealing choices for vapers who prioritize vapor flavor. Dr. Dabber Stella is a sleek and durable vape pen that produces high-quality vapor for its price.
How do I Charge my Dr Dabber switch?
To start off, let’s top off your Dr. Dabber Switch with a full charge. Grab the included power adapter and plug it into your Switch, and into a power source. Leave it plugged in until the red light on the power adapter turns from red to green, indicating a full charge.
Is the Dr Dabber switch the future of cannabis?
We then perfected the electric rig in 2018 with the Dr. Dabber SWITCH, a vaporizer called ‘the future of cannabis’ by Forbes, and ‘by far the best vaporizer [they’ve] tried to date’ by Digital Trends. We always have been and always will be dedicated to inventing new, exciting ways to enjoy cannabis.
How long do Dr dabber coils last?
How often do I need to replace the atomizer? Depending on usage and cleaning habits, Stella and Boost Evo atomizers will last anywhere between 2-12 months. Aurora, Ghost, and Light atomizers will last between 4-12 weeks before needing replacement.
How do you put wax on a vape?
Load the Wax into Your Vaporizer Since wax is very sticky, it is a good idea to use a poker or dab tool to transfer wax into the vape. Many wax vapes or the concentrates themselves come with a free dab tool. Start by collecting a small ball of wax with your tool. Use an amount not much larger than the tip your tool.
How do I start DR dabber?
To start off, let's top off your Dr. Dabber Switch with a full charge. Grab the included power adapter and plug it into your Switch, and into a power source. Leave it plugged in until the red light on the power adapter turns from red to green, indicating a full charge.
How do you load a dab atomizer?
0:212:51Shatterizer Wax Pen Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing your loading tool load a small amount of wax. Directly onto the coil. And then replace the capMoreUsing your loading tool load a small amount of wax. Directly onto the coil. And then replace the cap. Then carefully slide off the atomizer. Cover from the atomizer base.
Do you put wax directly on coil?
You can add it onto the coil. The coil at this point should be wet and waxy so it will only give you a bigger hit. We recommend you do not use a variable voltage battery on your wax chambers since they can burn it out. If you only have a variable voltage battery, put it to the lowest voltage, which is usually 3.2V.
How much wax do you put on coil?
With most pens you'll want to load a BB-sized amount at a time, or approximately 0.1g. Depending on the consistency of your extract and the depth of your coil you might even be able to put a little on the tip of your finger to load it.
How does the DR dabber work?
Dabber Ghost/Light, it is a glass fiber wick wrapped in a titanium coil and housed in a ceramic chamber. When you load the product onto the coil and press the button, the traditional coil and wick system is designed to heat the product gently enough to melt it into the wick, which in turn absorbs the product.
How do you turn on a vape switch?
2:343:52How To Turn On Your Vape Device - YouTubeYouTubeStart of suggested clipEnd of suggested clipFive times fast for on five times fast for off two clicks uh preheat if your device allows for it.MoreFive times fast for on five times fast for off two clicks uh preheat if your device allows for it.
How do you load a vape?
2:173:37Beginner Vaper Tutorial: How to Fill a Vape Tank - ecsupplyinc.comYouTubeStart of suggested clipEnd of suggested clipHold the tank on its side slightly to let the juice slide. Down the juice slides right in. Like soMoreHold the tank on its side slightly to let the juice slide. Down the juice slides right in. Like so once you've filled your tank to their desired.
Can you put concentrate in a vape?
If you're looking to amp up your tolerance or you need a high dosage for your medical condition, concentrates can provide a small and potent dose. Vaping concentrates also allows you to reap the strain's natural terpenes. Experience a world of aromas and flavors through vaporization only.
Charge it
To start off, let’s top off your Dr. Dabber Switch with a full charge. Grab the included power adapter and plug it into your Switch, and into a power source. Leave it plugged in until the red light on the power adapter turns from red to green, indicating a full charge.
Fill the bubbler
Before we put the Switch together, let’s fill the bubbler with water. Pour water into the mouthpiece, until it fills just past the percolator holes. Don’t fill it too much higher than the percolator or you’ll get water in your mouth. Connect the bubbler to the top of your Switch and give it a few test pulls to make sure it’s filled to your liking.
Test run
Let’s make sure your Switch is in working order before we load it up with concentrates. Flip the power switch to the left, or into concentrate mode, and look for the yellow LED light band to turn on. Use the + button to raise the temperature to its highest level (five yellow lights).
Concentrate: Choose your temp
With the power switch turned to concentrate mode, use the + - buttons to choose your desired temperature. Level One is best for maximum flavor, while Level Five is best for maximum vapor density. For this first session, try the middle temperature, or the third yellow light.
Load your cup
The Switch can be heated up first, and then loaded, just like a traditional torch and banger, but we’ll preload it first for this initial session. Take the ceramic cup out of the Switch with the reverse tweezers, and load it with a rice-grain sized amount of your chosen concentrate.
Fire it up
Once you’re ready for your first hit, press the “Go” button to engage the heater. The LED light band will turn red and escalate to indicate that it’s heating. It will turn green when it’s ready to go.
Advanced mode
This Quickstart Guide is meant to quickly get you up and running with your first session. Once you’re ready for more than the stock five temperatures, it’s time to play with Advanced mode. While the Switch is off, hold in the Go button and flip the toggle button to concentrate mode. The lights will turn multi-colored if you did it correctly.
How long does it take for a vaporizer to charge?
The vaporizer pens (Aurora, Ghost, Light) should be fully charged in about 2 hours. The Dr. Dabber Switch, Boost Evo, and Stella take about 1 hour to fully charge and have pass through charging. Your unit should come with some charge in the battery, but we recommend fully charging all units prior to first use.
How long do Aurora atomizers last?
Aurora, Ghost, and Light atomizers will last between 4-12 weeks before needing replacement. We do not suggest using the dab tool to clean your chamber. Do not dry burn atomizers to extend the life and flavor of these parts. There should always be a small amount of oil on the coils while in use.
What alcohol to use to clean atomizer coils?
We recommend using a cotton swab and 91% or higher ISO alcohol to clean your unit and atomizers. Do NOT use the loading tool to scrape the atomizer coils, as it is very easy to catch the wick/coil and tear it out of its connectors. This will render the atomizer useless immediately.
What is the advantage of induction heating?
Utilizing induction heating means the SWITCH has a number of advantages including extremely fast heat up times, no exposed electronics, and no atomizer that needs to be replaced over time.
Can overloading an atomizer cause a leak?
Overloading may result in wasted product, potential atomizer leakage leading to failure, and may restrict airflow and in turn, produce less vapor. Also, avoid touching the coil with the loading tool, as metal-on-metal contact can short out the connection.
Does the switch have atomizers?
The Switch does not have atomizers that need to be replaced. How does the heating element in the pen work? The battery is responsible for relaying a stable temperature to the titanium coil inside the atomizer as you hold down the button. This coil heats to the ideal temperature for melting waxes and oils.
How to use Stella wax?
To use Stella, you need to: Remove the mouthpiece. Dab the wax into the coil by using the dab tool. Replace the mouthpiece. Press the power button 5 times to turn it on. Press the power button 3 times to change the voltage settings.
What is a Stella dabber?
With unique releases such as the Switch ( Review | Buy) which is one of the few dab rigs that use conduction heating technology. Now, after much anticipation and speculation, they released their new flagship wax pen called Stella (which means ‘star’ in Latin).
What is the Dr Dabber logo on Stella?
Stella has two Dr. Dabber logos (middle and bottom part of Stella) that lights up and changes to the corresponding color of the temperature. The one on the middle is used as a power button to turn on/off the device and cycle through 3 temp settings.
What is Stella pen made of?
The Stella features a ‘floating coil’ that minimizes the contact points between the coil and the body of the pen. This design reduces heat transfer and prevents the device from getting uncomfortable to hold. The coil has a large bowl size and is made out of Alumina Ceramic that’s wear-resistant and capable of withstanding high temperatures.
Why does the battery adjust the temperature of the coil?
It allows the battery to adjust the voltage based on the temperature of the heating coil. So, instead of having a constant stream of power to the coil, the battery adjusts to make sure that the coil stays in the precise temperature. This is a great feature since the atomizer won’t get too hot and ‘burn’ the extracts, preventing dry or burnt hits.
How many mAh does Stella have?
Stella has a 600 mAh battery that uses a USB-C charger so the recharge time is pretty quick. It also supports pass-through charging which means you can use it while it’s plugged in. If you remove the atomizer, you’ll see the tip that enclosed the threaded gold connection for pre-filled carts if you want to vape oil instead of wax.
Does Stella vape have clouds?
It has features that you wouldn’t likely see on similarly-priced vapes like the floating coil system, haptic feedback, and the Temperature Coefficient Resistance that further helped with the overall performance. However, Stella is not capable of producing big intense clouds that some vapers like.
How to clean a rig with rubbing alcohol?
Rubbing Alcohol & Salt. A tried and true way to clean your rig is by using rubbing alcohol and salt. Assuming you’ve already emptied the water and have collected your reclaim (is possible), make sure your banger is removed as well. Now it’s time to add the rubbing alcohol and salt.
How to clean a banger?
Just simply pour a concoction of rubbing alcohol and salt in a plastic bag, place your banger in there, seal it, and gently shake. If your banger doesn’t appear to be getting clean, soak it in the rubbing alcohol for a few to help loosen the debris you can’t seem to shake off.
What is iso snap?
Each Iso-Snap is a cotton swab filled with isopropyl alcohol located in the shaft. Just snap the top cotton swab and isopropyl alcohol is released from the shaft down into the bottom cotton swab head so no heat is necessary for cleaning. YouTube. Dr.Dabber. 12.9K subscribers.
What to do before cleaning a rig?
Collect Your Reclaim. The first thing you should do before you actually get started on cleaning your rig is collecting the reclaim. If you don’t know what reclaim is, it’s the concentrate that gets caught in your rig, usually in the joint of the rig. You can dab your collected reclaim, use it for edibles, or throw it away, whichever you prefer.
Can you use kosher salt for rubbing alcohol?
Now it’s time to add the rubbing alcohol and salt. It’s recommended to use kosher salt because it is bigger and can knock off gunk easier than regular table salt, while for rubbing alcohol 99% isopropyl is recommended, but with COVID-19 shortages it may be difficult to come across that strength.
