Aspire Breeze 2 Filling Squeeze pod and lift the silicon seal, place the filling bottle/dropper into the pod filling hole squeeze the filling bottle/dropper bulb to add your preferred e-liquid into the pod system. Replace the silicone seal firmly and re-insert the pod into the power unit.
Is the Breeze 2 the best entry-level vape device for You?
Jun 05, 2019 · How To Install The Breeze 2 Coil: Begin by pulling and removing the drip tip section, then unscrew and pull out the chimney unit. Next, you’ll want to detach the coil from the airflow control ring and replace it with a new coil. Simply screw the chimney unit back onto the pod system and replace the drip tip section.
Can I use a regular dropper with the Breeze 2?
Aspire Breeze 2 Filling. Squeeze pod and lift the silicon seal, place the filling bottle/dropper into the pod filling hole squeeze the filling bottle/dropper bulb to add your preferred e-liquid into the pod system. Replace the silicone seal firmly and re-insert the pod into the power unit.
Will switching to vaping be a breeze for adult smokers?
The Breeze 2 has five main parts: a battery, coil heads, a pod, a mouthpiece, and an airflow controller. It has three buttons, a fire button located on the front, and two pod-release buttons on the side. Here’s how to get started: Take off the transparent dust cap covering the mouthpiece. The cap is great for travel, but not practical for daily use
What coil does The Breeze 2 come with?
May 16, 2018 · Once you’ve waited those long five minutes: ensure that the Breeze 2 is on, press the fire button, and vape away! The new pod system in the Breeze 2 is extremely simple to use, and reduces the chances of making a mess when refilling.
How do you use a breeze vape?
- Power on: Press the button 5 times rapidly.
- To Use: hold down the button as you inhale.
- Press button 3 times rapidly to cycle the voltage. 40% Voltage blue LED. 60% Voltage green LED. 80% Voltage yellow LED. 100% Voltage Red LED.
How do I know when my Breeze 2 is fully charged?
While charging the LED will indicate the Breeze's current charge status: 3.5 volts or less= orange light; 3.5 to 3.8 volts= blue light; 3.8 volts and above =both blue and orange lights. When the Breeze 2 is fully charged the LED will flash blue and orange 20 times then remain off.
How do you turn on a breeze vape?
How do I know if my Breeze is charged?
How long does the Breeze 2 take to charge?
Why does my Breeze 2 taste burnt?
Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there's still some juice there. Always stay inside the recommended wattage ranges.Sep 19, 2021
What's the difference between Breeze and Breeze Plus vape?
How many cigarettes are in a breeze?
How long does it take for your lungs to heal from vaping?
Aspire Breeze 2 Airflow System
Adjusting the airflow is simple, just pull off the mouthpiece and turn the knurled airflow adjustment ring to your liking.
Aspire Breeze 2 Pod
The ‘pod’ comes in two capacities, a 2ml TPD compliant version and a 3ml standard version.#N#To remove the pod just squeeze the pod release buttons on each side of the device to release and remove the pod system.#N#To re-insert, just place the pod back into the power unit, and push down firmly until it ‘clicks’ into place.
Aspire Breeze 2 Coil Installation
Coil installation is easy too, just pull and remove the drip tip, unscrew and pull out the chimney unit. Then detach the atomizer from the airflow control ring and replace it with a new one.#N#Screw the chimney unit back to the pod system and replace the drip tip section.
Aspire Breeze 2 Atomizer
The Breeze 2 comes pre-installed with a 1.0-ohm U-tech coil (specifically designed for nicotine salt type e-liquids)
Aspire Breeze 2 Filling
Squeeze pod and lift the silicon seal, place the filling bottle/dropper into the pod filling hole squeeze the filling bottle/dropper bulb to add your preferred e-liquid into the pod system.#N#Replace the silicone seal firmly and re-insert the pod into the power unit.
Aspire Breeze 2 Charging
Charge via the Micro USB port. Maximum charge current can reach up to 800mA. When the USB cable is attached the Breeze 2 indicator light will flash blue and orange three times.
Kit Content
1* Breeze 2 device / 2* Coils (1.0ohm / 0.6ohm) / 4* Extra O ring / 1* Silicon seal / 1* Micro USB Cable / 1* Warranty Card / 1* User Manual
What coils does the Breeze 2 use?
The Breeze 2 comes with the 0.6-ohm coil of the original Breeze and a new 1.0-ohm Utech coil head. They both wick from two small holes and one larger slot. The 0.6-ohm head has larger wicking holes than the higher resistance heads, which is ideal for higher viscosity juices. In general, both coils work really well. I really can’t complain. Both have been free from hot pops, spitback, and dry hits. Here are a few notes on the coils I received.
What is the coil size of the Breeze 2?
The Breeze 2 comes with the 0.6-ohm coil of the original Breeze and a new 1.0-ohm Utech coil head. They both wick from two small holes and one larger slot. The 0.6-ohm head has larger wicking holes than the higher resistance heads, which is ideal for higher viscosity juices. In general, both coils work really well.
How to adjust airflow on a Vape?
Adjust the airflow you want by turning the knurled ring, then return the mouthpiece. Wait about five minutes for the coil to saturate, then quickly press the fire button five times to turn on the device. Vape. Using the pod release buttons is pure fun. They work well with the latches on the deck to secure the pods.
Is the Breeze 2 a good vaporizer?
The Breeze 2 is a superb all-in-one vaporizer that delivers awesome flavor in a small and easy-to-use device. The new pod system is very user-friendly, and reduces the chances of making a mess. The vapor you get from the Breeze 2 is warm, dense, and flavorful. Considering the low-powered nature of the device, it goes beyond expectations in terms of performance.
What is the Breeze 2?
The Breeze 2 is a well-built, compact device. Similar to the original, the Breeze 2 is made of aluminum alloy and is an all-in-one device with a rounded rectangular body. In terms of size, it’s only a bit taller than a credit card, and about half as wide.
Is there a sequel to Aspire Breeze?
The Aspire Breeze 2 is finally here, and is the long awaited sequel to one of the most popular all-in-one vaping devices of all time, the Aspire Breeze. Sleek and compact, the Breeze 2 brings some minor cosmetic changes to the device as well as some much needed improvements over the original such as: improved performance, a new pod system, ...
How to fill Aspire Breeze 2?
To fill the Breeze 2, you’ll want to release the pod by pushing the two pod-release buttons on the side of the device. Slide the pod up and out and carefully remove the drip tip. We say carefully because the drip tip on the Breeze 2 is a little too snug and tends to go flying whenever its removed.
Does the Breeze 2 have a battery?
A much needed improvement over the original, the Breeze 2 comes with a built-in 1000mAh battery. If you’re a heavy vaper, you’re going to be using the Breeze 2 all day, and you want to know if it’s going to last you. Well, I have good news, the answer is yes. The battery performance of the Breeze 2 is great.
How many times does the Breeze 2 light flash?
When the Breeze 2 is fully charged, the LED will flash both blue and orange twenty times, and then remain off. The LED indicators can be pretty hard to see through the pod, and you may have to remove it to check your battery level every once in a while.
What is a versed vaper?
The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!
Is the Aspire Breeze good?
Overall, i’d say that the vapor high quality, production and temperature of the Aspire Breeze are fairly good for a reasonable, easy system.
What are the parts of an atomizer?
There are three main parts inside each atomiser coil, the casing, wire, and wicking materials. When you add e-liquid to the tank the wicking material soaks it up and when the battery is activated the coil heats up, which causes the e-liquid to vaporise.
How long do refillable pods last?
Most refillable pods last three-5 days, though this approximation is determined by your vape frequency. The included 1.zero ohm Novo 2 Mesh Coil offers extraordinary flavor and dense vapor production and is beneficial to be used with standard eliquids.
How long do mods last in a SMOK Nord?
Mods’ coils last for about 1 to 3 weeks, relying on how usually you utilize it, how well you deal with your coils, and the way you vape.
How long do mods last?
Mods’ coils last for about 1 to 3 weeks, relying on how usually you utilize it, how well you deal with your coils, and the way you vape. gif (1×1) Now users usually are not obliged to devour nicotine and may choose 0 nicotine juice as every day vaping products.
Can Li-ion batteries explode?
Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.
How to store a battery when not in use?
When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion. Always charge in or on a fire-proof surface. Never leave charging batteries unattended. Do not modify batteries or chargers in any shape or form.
