The Cool Fire IV allows you to switch between variable voltage and variable wattage mode. To switch to wattage mode hold the power button and the plus button together. Similarly, to switch to voltage mode hold the power button and the minus button together.
Full Answer
What is the variable wattage setting on a vape?
The variable wattage setting is much easier to use because most coils say what the optimal wattage output is. Lets say youre using a Crown 3 tank with 0.25ohm coils, the desired wattage is 80-90W. Depending on the e-juice youre vaping you would adjust your wattage between 80-90 until you hit that sweet spot.
What are the best tips for variable voltage/variable wattage mods?
Additional Tips on Variable Voltage/Variable Wattage Mods: Start using your device at a low setting and gradually increase it until you have found the setting that works best for you. Keep VV/VW away from water or extreme temperatures. Since they use delicate circuitry it is best to avoid these to prevent damage to the device.
What are VV/VW vape mods?
In simple terms, VV/VW are a battery powered vaping device that has an internal circuitry that regulates its output power through adjusting voltage, or adjusting the wattage. The internal circuitry feature is what makes these mods safe to use, and a great starter mod for beginners.
What happens if the wattage is too low for vaping?
If the volts are too high it will burn out your atomizer and your e-juice will taste burnt. If the volts are too low then you'll receive a flavorless hit. Vaping on the variable wattage setting essentially is controlling the amount of power going to the device.
How do you change the voltage on an innokin?
Similarly, to switch to voltage mode hold the power button and the minus button together. The wattage ranges from 6W right up to a whopping 40W in 0.5W increments, whilst the voltage ranges from 3V to 7.5V in 0.1V increments.
How do you change the wattage on a coolfire Ultra?
1:122:25Innokin Coolfire Ultra Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour up or down your hold in either the up or down for a second until it flashes. And then you canMoreYour up or down your hold in either the up or down for a second until it flashes. And then you can scroll and adjust your wattage.
How do I change the voltage on my mod?
You simply need to hold down the power button and the up directional button together and the screen will then flash at you, only then will it allow you to change the wattage.
How do I change my vape from Volts to watts?
0:271:44How to Switch Between Voltage and Wattage Mode on an Eleaf iStick 50wYouTubeStart of suggested clipEnd of suggested clipIt's same you know if I adjust this up to 5. That's just demonstration purposes five six it saysMoreIt's same you know if I adjust this up to 5. That's just demonstration purposes five six it says it's whatever Watts sixteen point five so it's basically just making one more prominent than the other.
How do I change my cool fire IV from Volts to Watts?
To switch to watts, hold down the fire button at the same time with “+” button. If you want to enter Variable Voltage mode, hold the fire button and “-“ button down together.
How do I change my cool fire Z50 from Volts to Watts?
2:494:22How To Use The Innokin Coolfire Z50 Zlide Kit A Full Tutorial ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp button.MoreUp button.
How do I adjust the voltage on my vape?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
How do I change my vape settings?
How Do I Change Modes? Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
How do I change the voltage on my Smok vape?
To change your mod setting from voltage to wattage mode, simply press the plus (+) button while at the same time holding down the power button. Likewise, to change from wattage to voltage mode, press the power button while at the same time holding down the minus (-) button.
What is best wattage for vaping?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.What Wattage Should I Vape at? Finding your Ideal ... - AquaVapehttps://www.aquavape.co.uk › what-wattage-should-i-vap...https://www.aquavape.co.uk › what-wattage-should-i-vap...
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.SMOK RPM2 Mesh 0.16ohm / 0.6ohm Replacement Coils - Single / Packshttps://www.vapourdays.co.uk › vape-coils › smok-coilshttps://www.vapourdays.co.uk › vape-coils › smok-coils
What wattage should I vape at 0.5 ohm?
For example, a 0.5 ohm coil will vape best at 15 watts up to 50 watts. Another place you can look to find out the appropriate wattage range is on the coil itself.Sub Ohm Vaping Guide For Beginners - Apollo E Cigs USA Bloghttps://www.apolloecigs.com › blog › sub-ohm-vaping-gu...https://www.apolloecigs.com › blog › sub-ohm-vaping-gu...
What is variable voltage?
Variable Voltage/Wattage mods are the most popular and commonly used vaping devices. Since vaping became popular these mods have evolved, have become widely available, and affordable. Beginners should get familiar with these mods before trying out mechanical or hybrid mods.
What is a VV/VW?
In simple terms, VV/VW are a battery powered vaping device that has an internal circuitry that regulates its output power through adjusting voltage, or adjusting the wattage. The internal circuitry feature is what makes these mods safe to use, and a great starter mod for beginners.
What are the advantages of a throat hit mod?
Other advantages that these mods have over mechanical and hybrid mods is that they have safety features .
What is the wattage of a Crown 3?
Lets say youre using a Crown 3 tank with 0.25ohm coils, the desired wattage is 80-90W. Depending on the e-juice youre vaping you would adjust your wattage between 80-90 until you hit that sweet spot.
How can I verify that my vaporizer is authentic?
Locate the Product Authentication number on the product packaging. Please visit https://www.innokin.com/verify-device and follow the instructions to verify your product authenticity.
The vaporizer is not producing flavour or clouds
Check that the coil is correctly inserted in your atomizer and that your atomizer is comfortably tightened down onto your Z80 mod. Check both the male and female ends of the 510 connectors for debris, e-liquid, and condensation and clean with a cotton swab and small amount of isopropyl alcohol.
What kind of 18650 battery should I use with my CoolFire Z80?
We recommend one from Mooch’s recommendation list. Click this link for more information: https://www.e-cigarette-forum.com/blog-entry/moochs-recommended-batteries.7593/
What is Vape While Charging?
Vape While Charging is a feature commonly seen in our mods that allows you to vape while you are charging your device. Be advised that while this feature can be convenient, it’s not recommend to vape while charging a device that is extremely low on battery life.
What is the best way to charge an Innokin vaporizer?
Use a certified wall charger with a high quality USB-C cable. Fast charging will require an appropriate wall charger and high quality USB-C charger. A separate individual 18650 charger is recommend for long-term 18650 battery charging.
The vaporizer is not holding a charge
Use a certified wall charger with a high quality USB-C cable. Monitor the device and verify that it is charging. Wait until the device is fully charged. Note: All batteries have a limited number of full charge cycles. A battery capacity may decrease based on charging and use over time.
What does Resistance (Ohm) mean?
The resistance of an atomizer coil is the amount of heat produced by the coil based on the battery voltage and wattage setting. The coil resistance should be printed on the side of the coil. Higher resistance coils tend to require less wattage, and low resistance “sub-ohm” (>0.9ohm) coils tend to require more wattage to produce vapor.
How many watts does a cool fire IV vape last?
Whilst many find the Cool Fire IV comfortable to hold due to it’s shape, others find it a bit awkward to hold. Battery won’t last the whole day if you vape at 40 watts. It’s a bit fiddly to change the wattage / voltage – but once you’ve done it once, it remembers your last settings.
How to switch to wattage mode on a Cool Fire IV?
To switch to wattage mode hold the power button and the plus button together. Similarly, to switch to voltage mode hold the power button and the minus button together.
How to tell if my Fire 4 is low on power?
The Cool Fire 4 has multiple battery indicators to let you know when the device is running low on power. The most obvious indicator is the battery icon on the OLED display, but you can also see the voltage remaining by holding down the plus and minus buttons simultaneously.
How long do you have to charge a cool fire?
Before using the Cool Fire you must charge the battery for at least 4 hours (ignoring the charge indicator for the initial charge). In the box you’ll find a Micro USB charger (DC 5V/1A) that you can use to charge your new device from a computer, or using a compatible plug adaptor.
What is the Innokin box mod made of?
It’s a high quality build made from lightweight aluminium that is formed to fit your hand comfortably. The brushed aluminium finish and range of colours makes the device very aesthetically pleasing.
How much is the Innokin Cool Fire 4?
The Innokin Cool Fire IV (available for £39.99) is the newest box mod on ECigaretteDirect, and the latest model in the popular Cool Fire series. In this post you’ll find an overview and tutorial with everything you need to know to use it.
Can you vape while charging a cool fire?
If, like me, you’re always forgetting to charge your battery until the last minute, you can also vape while it charges using its passthrough capability. By locating the micro USB port on the side of the device, it allows you to stand the Cool Fire upright while it’s charging.
What is Innokin Coolfire Mini?
Maybe you have not heard of Innokin as a brand when it comes to vaping. The brand has a line of quality vaping products. This include iSub, iTaste and more. They sell their products to Europe, America and the rest of the world.
Features of Innokin CoolFire Mini
Bright and clear OLED screen display allows easy access of vaping information
Innokin CoolFire Mini Delivery
The Innokin CoolFire Mini first impression is quite amazing. The small and ergonomic design makes it simple and very discreet. Filling the tank and charging the battery is straightforward. The Slipstream tank is well designed with no leakages or spills and you might have some dry hits if you extend the draw.
How the Innokin CoolFire Performs
If you want a simple MTL vape flavor, then the Innokin CoolFire Mini is a vape kit you should go for. First, the small size brings a lot of simplicity and high portability. You easily handle and carry along everywhere you go.
Battery Performance of Innokin CoolFire Mini
The CoolFire Mini has an internal 1300mAh power capacity battery. It delivers 40W of power output and you can adjust to as low as 6W. With such power capacity, you can vape all day long before another charge.
Innokin CoolFire Mini Vs Innokin CoolFire Ultra TC Kit
The Innokin CoolFire Ultra TC features iSub VE tank and is a high power starter kit. It is an easy kit to handle, a supercharged version of CoolFire IV mod. It can deliver up to 150 watts unlike the Mini that produces up to 40 watts vaping power. The kit features handy temperature control functions and with a high capacity battery of 4000mAh.
FAQ about Innokin CoolFire Mini
To power your Innokin CoolFire Mini, press the power button 3 times. This puts the device on. To put it off, strike the power button three times again.
What is Innokin CoolFire IV Plus?
The Innokin CoolFire IV Plus comes as an improved version of the earliest CoolFire IV. It now has 70watts output and a powerful durable 3300mAh battery capacity. However, it has the small form like the CoolFire IV hence portable on the go.
Features of Innokin CoolFire IV Plus
Micro USB charging port with pass-through feature – vape while you charge the mod
Performance of Innokin CoolFire IV Plus
The Innokin CoolFire IV needs few simple steps to start enjoying your favorite vape. Both beginners and professionals can operate this device. Besides, it comes with a straightforward manual that you can find very helpful.
Battery Life and Charging of Innokin CoolFire IV Plus
As mentioned, the Innokin CoolFire IV Plus has 3300mAh built in battery. With such power you have guaranteed all day vaping experience before a next charge. On intensive settings, the battery can last at least 3 days. It can last even longer on spread out vaping.
Innokin CoolFire IV Plus vs Innokin CoolFire IV
The new version CoolFire IV Plus is quite thicker and heavier compared to the original. It boasts of an advanced battery capacity, a higher maximum wattage. It also has the ability of firing down to the lowest resistance. The 3300mAh battery capacity of the CoolFire Plus vs the 2000mAh on the original brings out the big difference.
FAQ about Innokin CoolFire IV Plus
What is the difference between Innokin CoolFire IV Plus and Innokin CoolFire IV?
Alternative Vape: UPENDS
Uppor vape device by UPENDS is an ultimate pod we highly suggest for your vaping satisfaction. With this pen, you can receive a sufficient throat hit, thanks to enhanced coils that delivers great heating.