Fill your cartridge or tank with CBD vape juice and attach it to your vape pen. Wait at least 5-10 minutes to allow the coil to absorb the e-liquid. Take a small puff and wait a few minutes to gauge the effects. 0:06 0:51 The kangertech Evod is a button filling tank.
How do I Clean my kangertech vape pen?
Cleaning your Kangertech EVOD You should regularly clean out this top part of the EVOD battery and base of the tank. Do so gently, with a cotton ball or swab. Cleaning your vape pen regularly will extend the life of your EVOD battery and tank by a great deal.
How do I use the kangertech evod battery?
One trick is to flip your vape pen upside down so that the juice isn't flowing down into the atomizer. After you've got your device upside down, hold the button to fire your Kangertech EVOD battery and blow into the airflow holes, this will help shoot all the excess e liquid out of the mouth piece.
Should I upgrade to the kangertech subox mini vape pen?
If you are currently using the classic eGo-T Vape Pen or the Kangertech EVOD vape pen, this will be a noticeable upgrade that is easy to use but will provide a much better vaping experience. The Kangertech SUBOX Mini is a step up from the KangerTech Topbox NanoStarter Kit due to the noticeably larger tank and higher quality design.
How do I know if my kangertech atomizer needs to be replaced?
Kangertech SOCC Coils for the EVOD Tank. After a week or so of use, you might start to notice your Kangertech EVOD acting a little strange such as having a burnt taste or just not producing vapor like it did in the beginning. This is completely normal and is only a sign that your atomizer needs to be changed soon.
How do you turn on a Kangertech vape pen?
0:251:21Turning on a Kangertech Battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you get your kit charge your battery. And then. I turn it on and now that's ready to go. SoMoreSo when you get your kit charge your battery. And then. I turn it on and now that's ready to go. So we'll just try it out. And all good so that's how you turn on a kangertech battery.
How do you work a EVOD vape pen?
6:148:05EVOD starter kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the way that I recommend screwing the tank onto the batteries have the battery sitting in yourMoreSo the way that I recommend screwing the tank onto the batteries have the battery sitting in your fingers to work and spin freely. And then go ahead and start screwing the tank. On.
How do you know when your Kangertech EVOD is charged?
2:164:37KangerTech Evod VV Battery Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust stay red the entire time they're charging. And then turn green to let you know they're doneMoreJust stay red the entire time they're charging. And then turn green to let you know they're done charging.
How do you use the Kangertech EVOD charger?
The Kanger Evod battery can be charged by removing the attached clearomiser/atomiser, which then exposes the thread on the end of the battery. Connect the battery to the charger by bringing the threads together and turning in a clockwise direction.
Why is my EVOD pen not working?
Make sure it is turned on: If you are having issues charging your ego or evod battery, the first thing you want to do is make sure it is turned on. To do this press the power button 5 times in a row. You will want to press the button 5 times rapidly, in a rhythmic flow.
Why is my EVOD vape pen blinking?
If your battery reads too low, the device will blink red and shut down. If your device overheats, it will blink three times before turning off. In the case of a short circuit, the mod will turn the device off automatically.
How long does it take for a Kangertech to charge?
Charging the battery The red light indicates that there is not full charge in the battery and will normally take about 2 – 3 hrs for a full charge. When the battery is fully charged the LED light will turn to green. Do not leave battery unattended or leave to charge overnight.
How long does it take to charge a Kangertech vape pen?
3-4 hoursIt takes 3-4 hours to charge an EVOD battery completely. Batteries can be charged by it are, 650, 1000 & 1500 mah EVOD batteries.
How do you turn on a Kangertech EVOD?
4:194:35How to Use a Kanger Evod Kit - FlavorPuff.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipProduct high build quality to turn it on simply press the button three times it'll blink and thenMoreProduct high build quality to turn it on simply press the button three times it'll blink and then press it to start vaping that concludes our review of the kangertech Evod kit happy vaping.
Why is my EVOD blinking 3 times?
Battery LED flashes 3 times If the LED still flashes 3 times without the tank you know it's something to do with the battery, if it only flashes when it's connected to the tank it could be the that there isn't a good connection, or it could be the coil head.
Why does my vape blink 10 times?
Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
What is a Kangertech Subox Mini?
Well, let me put it lightly, the Kangertech SUBOX Mini starter kit (Kanger KBOX Mini) is a must own box mod for ALL vapers! Easy to use, yet extremely powerful, the Kangertech SUBOX Mini box mod packs a serious punch with a smooth warm vapor. This box mod has the ability to switch between the replacement OCC (organic cotton coils) and the Kanger RBA deck for the advanced users. This kangertech subox mini review and overview is more of a tutorial on the kangertech subox mini, more than an in depth review on vapor production and internal components of the device. Many people love this device for the kangertech subox mini OCC coils and the subox mini battery which uses a 18650 IMR Battery. Check out the Model-C Version
How much ejuice to soak a cotton tank?
What you want to do is take one drop at a time on the edge of the center tube to soak the cotton. You will only need about 2-3 drops of ejuice to completely soak the center cotton.
How to use OCC coil?
You want to start by soaking the OCC coil in both exposed air holes to allow ejuice to completely soak into the cotton. Take an ejuice dropper to drop a single drip of ejuice in both holes, one at a time, letting each single drop completely soaking in before another drop is made. Once you have multiple drips on both sides of the OCC coil, you want to make sure the ejuice is completely soaked into the cotton before the next step.
Does the Kbox mini come with a plastic sleeve?
After you have un-boxed the Kangertech SUBOX/ KBOX Mini , it will come already assembled with a plastic sleeve around it for protection against scratches. Remove the plastic sleeve from the housing and unscrew the Subtank Mini from the KBOX housing unit. You can remove the Subtank by twisting counter clockwise.
