How do I use the EVOD vape pen? The vape pen is easy to operate. The power button is turned on by pressing the button five times. Then the bottom dial is twisted to charge off the voltage selecting the voltage print for the startup.
How to charge an evod vape pen?
The first thing you will need to do is charge up your EVOD vape pen. Simply unscrew the battery portion (the part with the button on it) from the wide metal ring that attaches it to the clearomizer tank. You should see a round area where the battery connects to the charger, with threading to screw the charger on.
How to use a vape pen?
The vape pen is easy to operate. The power button is turned on by pressing the button five times. Then the bottom dial is twisted to charge off the voltage selecting the voltage print for the startup. The screwing effect turns the battery on.
What is the evod pen?
The EVOD makes it possible for an active vaper to enjoy vaping without having to incur extra charges. The pen’s exterior has a matte finish that cuts down on the fingerprints and smudges when being used.
What are the settings of the evod twist VV battery?
The EVOD Twist VV Battery offers settings at 3.2 and 4.8 volts featuring a slender and slim design which makes this ideal for vaping anytime and anywhere. Easily activate the battery with 5-clicks On/Off.
How do you know what voltage to set your vape pen?
Best Vape Pen Voltage Setting In general, the ideal voltage setting for more THC carts is 2.5V - 3.3V. More specifically, a voltage right around 3.0 V should yield a balance of taste and potency from your draw. The reason for this is that at this medium level of temperature, you get the best flavor from your THC carts.
How do you change the voltage on a vape battery?
0:423:22How to adjust the voltage on your 510 vape battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe other method is gonna be with the variable. Click buttons. So this one may not look like itMoreThe other method is gonna be with the variable. Click buttons. So this one may not look like it adjusts. But once you turn it on it'll flash and then you can do three clicks to change settings.
How do you use a voltage vape pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it's ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge.
What voltage and wattage should I vape at?
They operate at different voltages, although the mechanics are just the same: increasing the voltage or resistance results in a higher wattage. For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage.
What is voltage on a pen?
The most common range for a variable voltage vape pen is between 3.3 volts and 4.8 volts.
What does voltage mean on vape?
Voltage is one of the factors that effects the amount of vapour you get. The greater the voltage, the higher the temperature, meaning more vapour. Original, Logic CURV, Logic PRO and Logic Compact all have fixed power settings - 3.7 Ohm.
How do I change the voltage on my high key?
A: After powering on the device, click the oval button 3x fast to change the voltage. The HIGHkey device has 4 voltages with a screen that will show each voltage setting (2.8v, 3.2v, 3.6v, 4.0v).
How do you adjust the temperature on a vape pen?
How do I change the temperature of my G Pen Pro Vaporizer?Once the G Pen Pro Vaporizer has been powered on, you can cycle through its three temperature settings by simply holding the power button for three seconds. ... Low (Blue) - 375° F / 190° C.Medium (Green) - 400° F / 204° C.High (Red) - 428° F / 220° C.
What do the colors on my vape pen mean?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
How to replace evod vape pen coil?
To replace the coil; Rotate the tank to make sure it faces the ground. Unscrew that battery from the tank. Remove the faulty atomizer coil by screwing it in the anti-clockwise direction.
Why is my EVOD vape pen stuck?
Firing pin stuck - if you expose your EVOD Vape Pen to dust, it may clog the firing way and cause the pin to get stuck. Here you need to clear any dirt to set the pin to move freely. Faulty Charger - like any machine in use, your EVOD Vape Pen charge may become faulty after some time.
What is the battery in an evod pen?
As earlier stated, EVOD Vape Pen is powered by a 900mah Lithium-ion battery which is rechargeable using a USB charger. The batter is 510-threaded, thus compatible with EVOD Vape Pen and other standard vaping kits.
What is an evod pen?
What is EVOD Vape Pen? EVOD Vape Pen is a slim and sleek vape pen developed and sold by EVOD. It is powered by a Lithium-ion 900mAh battery that is able to power it for a long time allowing you to vape for a long time before stopping to recharge.
Why is my EVOD vape not charging?
It is not charging; then it may be because the battery is not turned ON. Make sure you turn it ON by pressing the power button five times in close succession.
How to make puffs with evod?
Fill the tank with your favorite e-liquid. Make sure that the liquid does not overfill to avoid leakages. Flip the battery that you had removed earlier by lining it up with the coil. Turn on your EVOD Vape Pen, set the mouthpiece on your lips, and start making puffs.
What voltage do you use for vaping?
The voltages can be varied as 3.3V, 3.8V, 4.3V, or 4.8V. This allows you to vape from herb to wax tank or butter to crumble extracts.
How to use an EVOD vape?
How To Use The EVOD Vaporizer. First thing you’ll need to do is remove the Liquid Tank from the Battery Connection. You’ll do that by turning the Liquid Tank counterclockwise to the battery. Once It’s open, you should see a hole in the center (shown below) that leads to the mouthpiece.
How to turn on an evod?
For first time users, one of the more confusing parts of using a vaporizer is usually turning it on. The EVOD Vaporizer is turned on or off but pressing the silver button located on the battery 5 consecutive times. You then hold the silver button again to start the vaporization process.
What is the coil unit on an evod?
Coil Unit – This part is normally hidden inside the Liquid Tank, it contains the heating coil that will be vaporizing the eLiquid. Battery Connection – This ring will hold the coil and connect to the battery. Battery – This piece will power on and off your EVOD Vaporizer.
Can you overfill an eliquid?
Don’t overfill it, you want to make sure that the eLiquid doesn’ t go above the tube. Once your done, flip the Battery part you detached earlier and reattach it to the Liquid Tank by lining up the Coil Unit to the inner tube inside the Liquid Tank.
How many pieces does an evod have?
Your EVOD can break down into four pieces, the base of the tank, the tank itself, the atomizer and the EVOD battery; also included or purchased separately should be a charging cable. (Some models also have removable mouth-pieces, which just pull out.)
How to fill up a vape tank?
In order to fill up your vape tank, you need to take it off of the EVOD battery and remove the base of the tank. If you already have a little e liquid inside, you might want to do this upside down so that the remaining e liquid doesn't spill out and make a mess. Now that you have the base of the tank off, turn the tank upside down, ...
How long does an EVOD battery last?
As long as you stick to these tips & tricks and keep up with maintenance and cleaning, your battery should last you roughly 300 charge cycles and your tank should last you about 6-12 months.
Why does my vape pen leak?
Over priming and certain environmental elements can cause your atomizer to flood or your tank to leak. Elevation changes, extreme warmth or cold and over/under tightening are all instances that can cause these issues. Although a small amount of leaking is completely normal and to be expected, occasionally you may experience some major leaking issues. If this occurs, disassemble your vape pen and wipe all the e liquid off of it; make sure to get the top of the battery where the tank connects, if too much e liquid gets in there or it's left for too long, the EVOD battery can be damaged possibly beyond use. Before reassembling try to think about what caused it to happen in the first place, ask yourself questions like was your tank over/under tightened, are you traveling into a major altitude change, was it left in too warm of an environment, ETC.. With the power of deduction you should be able to figure out why it happened and from there you can reassemble your vape pen and hopefully prevent it from occurring again right away.
What is the airway on an E liquid tank?
If you look into the bottom end of the tank, you can see the airway, which is a long cylindrical tube connected and leading out to the mouthpiece. Depending on what e liquid you got, you will either have a glass dropper or a nipple on the bottle to dispense the e liquid out of.
Do you need to remove the silver ring from an atomizer?
Depending on why you are disassembling in the first place, you may or may not need to remove the atomizer.
Can you fill an E liquid tank?
Don't fill the e liquid up any higher than the airway or else you will experience the e liquid leaking down through the mouth-piece. Once you have your tank filled, make sure your atomizer is tightened into the base, then reattach the base of your tank.
How to charge an evod vape pen?
Simply unscrew the battery portion (the part with the button on it) from the wide metal ring that attaches it to the clearomizer tank. You should see a round area where the battery connects to the charger, with threading to screw the charger on.
What does the green light on my evod pen mean?
The light will either show a solid red light or will flash between red and green while it is charging. When your EVOD battery is fully charged, the light will show solid green. At this point you can unscrew the battery from the charger and reattach it to the rest of your vape pen.
How to see e juice level on clearomizer?
To do this, you unscrew the clearomizer tank (the upper portion with clear slits where you can see the e juice level) from the wide metal ring attached to the battery. When you detach these two portions, you will see the atomizer coil portion of the clearomizer.
What are the parts of an EVOD starter kit?
All working parts on the EVOD Starter Kit. The working parts on the EVOD are the battery and the atomizer coil. The battery will last you for quite a while before it starts losing charge. The atomizer coil will probably need to be replaced after a few weeks, because the heating element itself will eventually wear out.
What is in the EVOD starter kit box?
When you open the package, you will find the EVOD Starter Kit box inside, along with a bottle of e juice. The EVOD box has your 2 EVOD vape pens inside it, fully assembled so that you can see how it goes together. When you take your vape pen out, you will also see an extra liner in the box.
Why does my atomizer gurgle?
If your atomizer coil starts to gurgle while you are using it, this is because e juice is getting directly onto the atomizer coil and flooding it. You can clean this out easily by unscrewing the battery from the atomizer, putting a tissue on the bottom side of the atomizer, and blowing through the mouthpiece.
How long does it take to clean a BCC atomizer?
To do a complete cleaning, you will want to rinse out the atomizer coil with with alcohol (Vodka or rubbing alcohol) and let it dry for 24 hours.
