How To Use The Coolfire I
- Insert the Battery. First things first, you’re going to need to place a battery inside the Battery Tube. Remove the cap...
- Attach the Atomizer. Once the battery is inserted, you should attach your atomizer to the Threading Connection at the...
- Turn On The Cool Fire I. With everything attached you can now turn on the CoolFire I and begin vaping.
Can I vape while my Cool Fire is charging?
If, like me, you’re always forgetting to charge your battery until the last minute, you can also vape while it charges using its passthrough capability. By locating the micro USB port on the side of the device, it allows you to stand the Cool Fire upright while it’s charging.
How do I use the Cool Fire IV?
If you’re using it throughout the day, you can also lock the Cool Fire by pressing the power button 3 times. The Cool Fire IV allows you to switch between variable voltage and variable wattage mode. To switch to wattage mode hold the power button and the plus button together.
How do you refresh a vaporizer coil?
-Navigate to Refresh using the same buttons, then press the fire button. -Choose either the automatic refresh mode or the extended refresh mode which requires you to hold down your firing button during refresh to refresh your coil. How can I verify that my vaporizer is authentic?
What makes the coolfire IV different from other coolfire models?
The Cool Fire IV features a greater range of Variable Voltage, Variable Wattage, advanced safety features, portable electronics charging capacity and also ‘Vape while charging’ Technology. The CoolFire IV vapes perfectly with the Innokin iSub Apex & iSub-G Sub Ohm tanks.
How do you use CoolFire IV?
12:1217:46Cool Fire IV By Innokin - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut in the ice-sub. And try it out. Alright so once you click it. Shows you point four seven pointMorePut in the ice-sub. And try it out. Alright so once you click it. Shows you point four seven point four seven ohms close to 0.5. Alright. And it goes up you don't press it.
Why is my CoolFire IV not working?
Battery won't turn on Ensure the manual switch is on. (This is located on the base of the device). If the CoolFire is charging, try removing the charger and then replacing it. Try flipping the manual switch to off and then back on again.
How do I use my CoolFire Z50?
2:323:38Innokin Coolfire Z50 Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you are ready to take your first vape. Simply press the fire button on the front of the device.MoreWhen you are ready to take your first vape. Simply press the fire button on the front of the device. Once your e-liquid is soaked into your coil you're ready to take your first vape.
How do I change the settings on my CoolFire Ultra?
1:042:25Innokin Coolfire Ultra Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour up or down your hold in either the up or down for a second until it flashes. And then you canMoreYour up or down your hold in either the up or down for a second until it flashes. And then you can scroll and adjust your wattage.
Why is my innokin vape flashing green?
The green flashing like is an indicator that there is a shortage between the coil and battery. Solution? First off, check the coil is in there snug and the bottom of the tank is screwed on tight.
Why is my vape not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
What voltage should I set my coolfire Z50 to?
Innokin Coolfire Z50 Battery Life The 1.2Ω coil-head has a recommended wattage range of 10W – 14W, and the spare 0.8Ω coil-head works best between 15W – 18W. Those are really low power outputs, so that 2,100 mAh battery will mostly likely last you for a whole day, depending on how much you vape.
How do I work my innokin vape?
After you've charged the battery and filled the tank, it's time to start vaping with the Innokin Go S. Press the fire button five times quickly to turn the device on. To vape, puff on the tank's mouthpiece while holding the fire button. To adjust the tank's airflow, rotate the collar on the bottom of the tank.
Why is my coolfire Z50 not working?
Check that the coil is correctly inserted into the atomizer and that the atomizer is correctly attached. Ensure the attached atomizer is tightened to the 510 connector adequately. Check the female 510 connector for debris, e-liquid and condensation as well.
How do I change my innokin settings?
Should you wish to change the setting, hold either the "+ or -" button for a few seconds until the current power setting starts flashing then let go. Once the display is flashing, you can increase or decrease the setting as required. The display will cycle from 6.0W to 40.0W (in 0.5 steps).
How do you reset an innokin vape?
Press the fire button 3x quickly to turn it off, then on again. What is the issue? I may be able to help you solve whatever problem you're experiencing. After charging the green light stays on even when a tank is not not attached.
How do I change my innokin Kroma settings?
2:484:14Innokin iTaste Kroma A Zenith Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold your finger on the plus or minus button at the bottom of the device. And your wattage shouldMoreHold your finger on the plus or minus button at the bottom of the device. And your wattage should begin to flash. Once flashing you can adjust your wattage in increments of 0.5.
What Is The Coolfire II?
The Coolfire II is a grenade shaped battery with 510 threading that makes use of a variable wattage system.
How To Turn On The Coolfire II
One of the most confusing aspects of a vaporizer to a new user is how to turn them on. Thanks to safety regulations and hardware limitations it’s not always the most simple thing to figure out.
Thanks For Reading Our Guide On How To Use The Coolfire II!
We hope we’ve helped you gain a clear understanding of how to make use of it.
How many watts does a cool fire IV vape last?
Whilst many find the Cool Fire IV comfortable to hold due to it’s shape, others find it a bit awkward to hold. Battery won’t last the whole day if you vape at 40 watts. It’s a bit fiddly to change the wattage / voltage – but once you’ve done it once, it remembers your last settings.
How to switch to wattage mode on a Cool Fire IV?
To switch to wattage mode hold the power button and the plus button together. Similarly, to switch to voltage mode hold the power button and the minus button together.
How to tell if my Fire 4 is low on power?
The Cool Fire 4 has multiple battery indicators to let you know when the device is running low on power. The most obvious indicator is the battery icon on the OLED display, but you can also see the voltage remaining by holding down the plus and minus buttons simultaneously.
How long do you have to charge a cool fire?
Before using the Cool Fire you must charge the battery for at least 4 hours (ignoring the charge indicator for the initial charge). In the box you’ll find a Micro USB charger (DC 5V/1A) that you can use to charge your new device from a computer, or using a compatible plug adaptor.
What is the Innokin box mod made of?
It’s a high quality build made from lightweight aluminium that is formed to fit your hand comfortably. The brushed aluminium finish and range of colours makes the device very aesthetically pleasing.
How much is the Innokin Cool Fire 4?
The Innokin Cool Fire IV (available for £39.99) is the newest box mod on ECigaretteDirect, and the latest model in the popular Cool Fire series. In this post you’ll find an overview and tutorial with everything you need to know to use it.
Does the Cool Fire IV have a cutoff timer?
For your peace of mind, the Cool Fire IV is packed with safety features including low voltage protection, short circuit protection, overheat protection (will display ‘too hot’), over discharge protection and a 15 second cutoff timer, while the built-in heat dissipation holes further prevents the device from overheating.
How can I verify that my vaporizer is authentic?
Locate the Product Authentication number on the product packaging. Please visit https://www.innokin.com/verify-device and follow the instructions to verify your product authenticity.
The vaporizer is not producing flavour or clouds
Check that the coil is correctly inserted in your atomizer and that your atomizer is comfortably tightened down onto your Z80 mod. Check both the male and female ends of the 510 connectors for debris, e-liquid, and condensation and clean with a cotton swab and small amount of isopropyl alcohol.
What kind of 18650 battery should I use with my CoolFire Z80?
We recommend one from Mooch’s recommendation list. Click this link for more information: https://www.e-cigarette-forum.com/blog-entry/moochs-recommended-batteries.7593/
What is Vape While Charging?
Vape While Charging is a feature commonly seen in our mods that allows you to vape while you are charging your device. Be advised that while this feature can be convenient, it’s not recommend to vape while charging a device that is extremely low on battery life.
What is the best way to charge an Innokin vaporizer?
Use a certified wall charger with a high quality USB-C cable. Fast charging will require an appropriate wall charger and high quality USB-C charger. A separate individual 18650 charger is recommend for long-term 18650 battery charging.
The vaporizer is not holding a charge
Use a certified wall charger with a high quality USB-C cable. Monitor the device and verify that it is charging. Wait until the device is fully charged. Note: All batteries have a limited number of full charge cycles. A battery capacity may decrease based on charging and use over time.
What does Resistance (Ohm) mean?
The resistance of an atomizer coil is the amount of heat produced by the coil based on the battery voltage and wattage setting. The coil resistance should be printed on the side of the coil. Higher resistance coils tend to require less wattage, and low resistance “sub-ohm” (>0.9ohm) coils tend to require more wattage to produce vapor.
How much vaping power does a Coolfire IV have?
With 40W of vaping power, the CoolFire IV fires a full range of tank resistances and each is made with the highest quality materials to create a vaporizer that you can rely on!
Is there wasted power in vaping?
There is no wasted power and exact accuracy means you are always vaping the power level that you choose. Vrms provides superior precision in delivering the exact wattage Ohm’s Law requires and stable power means better vapor. HIGHLIGHT.
