how to use 4 score vape pen

How do I turn on my 4 core pen?

In order to turn your pen on/off simply click the button 5 times. Your battery light will blink three times indicating that it is now turned on/off.

How do you charge a 4 score vape pen?

To charge, connect your charger to the CURVE by plugging it into the bottom (only one end will properly fit) of the CURVE. Plug your charger into a USB compatible charging block such as a computer, phone charger, or other device.

What do the three colors on a vape pen mean?

Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting.

What setting should I use on my DAB pen?

Dab Pen Temperature Settings And as with regular cannabis vape pens, temperature makes a big difference in your dab pen experience. As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates.

How do I know my pen is charging?

Simply connect the pen battery to the charger and insert into a USB port on a computer or other electronic device. The light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.

What does it mean if my vape pen is blinking red?

If you're drawing on your vape, and you see a blinking red light, that means it's time for you to recharge your battery. It's important to charge with the proper voltage designed for your vape battery.

What does blue light on vape pen mean?

Why is my vape pen blinking BLUE? When you pressing power button 3 times continuously, the indicator light blinking blue, it indicates that the vape pen switches to medium mode power output.

Why is my DAB pen blinking 4 times?

Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.

How do you smoke a vape pen for the first time?

It's a simple technique.Slowly draw vapor into your mouth for a few seconds.Hold the vapor in your closed mouth for a second or two.Open mouth and breathe in the vapor to your lungs (not a “swallow”)Exhale after vapor is in lungs.

What temp should my vape mod be at?

390 F to 490 F.The best temperature to vape e-juice is in the range of 390 F to 490 F. The sweet spot for many temp control vapers is 420 F. Most temperature control vape mods have the capability of 200 F to 600 F. However, at higher temperatures the vapor can be very hot.

How to charge a day pen?

Day Pen: Your pen comes with a USB charger. To charge, connect your charger to your pen as it was when you received it. Remember not to overtighten but to make sure it is snug. Plug your charger into a USB compatible charging block such as a computer, phone charger, or other device.

How long does a day pen last?

However, for the all-day-long user, the Day Pen’s charge should last through the majority of a full day, while the Curve should last up to 3 full days.

Featured collection

Enjoy 4SCORE products as we focus on bringing you the best quality products for the best prices.

Lifetime Warranty

Please visit our warranty page to find out how we stand behind all of our products.

How to use a vape pen?

If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.

How to turn on a vaporizer pen?

To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...

How long does it take for a vape battery to change colors?

It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.

Do you need a top airflow cartridge for vaping?

If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.

Do vape batteries need to be charged?

Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.

Do vapes need a charger?

Most vapes will either use a Micro USB charger, or come with a vape pen charger. VPM carries Vape Pen Chargers if you ever misplace yours, or if you just like to have extras around. Batteries will generally light up once they are plugged in indicate they are charging.

How long does it take to learn to use a vape pen?

It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one.

How many times does a vape pen battery turn on?

Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.

What to do when your vape is not in use?

Tips for When Your Vape is Not in Use. Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.

What is the dab mode on a vape?

The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale. The first three settings are perfect for those who want to vape without having to press a button, and will vape THC cartridges by simply inhaling.

How long does it take for a vape puff to stop heating?

This means the pen will stop heating the cartridge after a certain amount of time. Most pens will have this occur around 8-seconds.

Can you vape with a 510 atomizer?

The O.pen has evolved into the 2.0 version with multiple temperature settings, including a dab mode. So, you can enjoy vaping your favorite cannabis extracts with your choice of 510-thread wax atomizer. There are many aspects to consider when purchasing a vape pen battery.

Can you take a puff of THC oil right away?

It's important not to take a huge puff right away, this can lead to unwanted side effects such as lung irritation and paranoia. Instead take some small puffs and inhale for only a few seconds, this will allow the coils to warm up the THC oil.

What is a single use vape pen?

These single-use pens are generally smaller and even more discreet than their reusable counterparts. Disposable vape pens generally one-piece units, with no removable battery, no refillable heating chamber, and no button (auto draw). Once the oil/concentrate supply is depleted, you can simply discard it.

How many clicks to turn on a vape pen?

Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit. The button settings on a vape pen can also be a disadvantage.

What is the part of a vape pen that draws vapor?

Mouthpiece: This is the part that you draw the vapor from and attaches to the heating chamber. Charger: Separate from the pen itself, this is usually a micro USB and is used to charge your vape battery. Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced.

How does a vape pen work?

Basically, a vape pen works by providing power to the heating chamber, which then heats the cannabis herbs, oil, or wax, until a vapor is produced . That vapor is then inhaled through the mouthpiece. Yes, it’s really that simple.

What is the main part of a vape pen?

Most vape pens have the same parts, though some will differ slightly. Battery: This is what powers the device and usually the longest part of the pen. Heating chamber / atomizer: This is where your concentrated cannabis oil, wax, or dry herbs are placed to be heated until they produce a vapor. Attaches to the battery.

What is a cannabis concentrate?

Cannabis concentrates come in a few forms. One form is pre-filled, disposable oil cartridges. Other concentrates are referred to as budder, wax, and sugar, so named for their appearance and consistency also work best in vape pens. These are generally also easier to work with and load on the go. You can also get refillable oil cartridges.

What is an auto draw on a vape pen?

Vape pen users have their preferences when it comes to models with activation buttons or “auto draw” (meaning they’re activated simply by inhaling on the mouthpiece). The advantage of activation buttons is that they offer more control over temperature.

How much liquid does a vape pens hold?

Others can carry enough vape material for multiple uses. The vapes in our CBD Vape Liquid bundles hold 1ml of vape liquid, enough for possibly a hundred puffs or more, depending on the length of time of each draw.

What to do before using a vape pen?

The first thing you need to do before using your vape pen is to ensure that it is loaded with your chosen vape material. You can find how to do this in your vape’s user manual. Be sure not to overload your vape to prevent leaking.

Why do you push a button when you vape?

Vapes with a button require you to push it while inhaling in order to activate the atomizer and create vapor. If your vape features variable heat, you will likely push this button a series of times to switch between heat settings. A similar series of button presses will turn your vape on and off.

Why do you use a vape pen?

Using a vape pen allows you to take advantage of the active ingredients in your vape material without burning it, avoiding many of the toxins and carcinogens that are released by combustion when smoking. Vaporizers use a heating source, usually called an atomizer, to turn electrical power into heat, which is then applied to your vape material ...

What are the benefits of vaping?

One of the main benefits of a vape pen is that it allows you to enjoy your favorite botanicals without combustion, removing much of the risk from toxins and carcinogens that are released into smoke. With a vaporizer, the heat levels don’t reach high enough to burn your vape material, so the vapor you inhale contains ...

How do buttonless vapes work?

Button vs Buttonless Vapes. Buttonless vapes, sometimes referred to as autodraw vapes, are activated simply by taking a puff or “draw” on your vape’s mouthpiece. As you take your draw, pulling air through the vape, it will automatically activate your vape’s atomizer, heating your vape material to produce vapor.

What is vaporizing a vape?

Vaporizing, at its most basic, is heating a vape material (dry herb, botanical extract, e-liquid, etc.) to its vaporization point, a temperature below the point when combustion occurs but hot enough to turn the active ingredients in your vape material into an inhalable vapor. Using a vape pen allows you to take advantage ...

What is a vape pen?

Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.

How to inhale a vaporizer?

How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.

How to turn off battery on a vape?

Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.