To remove the atomizer coil, unscrew it by twisting counterclockwise. To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket.
How to unscrew a stuck vape tank?
If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
How to fix a jammed vape tank?
However, if you are having trouble detaching the tank from your device, you need to unstick the tank. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
Why are my vape parts getting stuck?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device.
How do you get a vape out of a tight spot?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
How do I unscrew a stuck vape coil?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
How do you take apart a vape atomizer?
To remove the atomizer coil, unscrew it by twisting counterclockwise. To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket.
How do you get a stuck tank out of a Mod?
Vape Tank Stuck on ModPower off the device.Remove batteries where possible. Some devices may not be designed to have batteries removed. ... Figure out if your mod is broken. If the mod is broken, that may explain how your tank became stuck. ... If the mod is intact, try a better grip. ... Prepare to replace some parts.
How do you remove the atomizer from a Smok tank?
1:215:44How to change coils on SMOK Alien TFV8 TFV12 Series Vape Tanks + ...YouTubeStart of suggested clipEnd of suggested clipWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If youMoreWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If you accidentally remove the bottom plate of the atomizer.
How do you take apart a Smok tank?
0:483:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe toMoreIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe to the top unscrew. And there you go voila. This is inside of your coil.
How do I clean my vape atomizer?
To carry out this method, simply submerge your atomizer in some isopropyl alcohol for 30-60 minutes. This will cause the hardened dirt to become saturated and it will break down and pull away from the atomizer when you wipe it down with your cotton buds.
How do you open a Smok vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'llMoreFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'll be using mango buy salt shaker. Once your pot is full pulls the cap push the pod into the device.
How do I change my Smok atomizer?
Step 1 Coil. Unscrew the tank from the mod. ... Make sure there is no vape juice in the tank. You may dispose of any excess juice by pouring it into the trash. ... Disconnect the filter and the atomizer from the bubble tank. ... Unscrew the coil from the filter. ... Throw the old coil away. ... Screw the new coil into the filter.
Can I rinse my vape coil with water?
Here is how you should clean your replaceable coils: Let your coil soak in ethanol, vinegar, or cheap vodka for at least a couple of hours. Place it under the tap and rinse. Rinse once more with some distilled water.
Why is my Smok vape saying no atomizer?
“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
Opening A Jammed Vape Tank
If you have a “muscular” pair of hands, and can firmly grip the tank, then you’re good to go. Take note that a vape tank is fragile and should be handled with a lot of care. You should only apply pressure to the right part of the vape tank. Besides, numerous tools can help you open a jammed vape tank:
How To Unscrew A Stuck Vape Tank?
This is probably the easiest way of separating a jammed vape tank from your mod. Here, you can use a non-stick piece of cloth, even a chamois cloth will do a good job, grip your vape tank and twiddle it off. Additionally, a pretty old, rough, and stiff cloth has a better “grippiness” as newer ones might be a bit sleeper.
Tank Stuck To Vape Battery
In some cases, the vape may not only be stuck to the mod but also the batteries. This is way riskier because any botched solution would mean replacement with an entirely new tank. When trying to open a vape tank stuck to vape batteries, be extra careful not to destroy the tank and the mod altogether.
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
What is the sticky pad on my mouse pad?
The back of your mousepad is covered in a sticky foam that keeps it from sliding around on your desk when you move the mouse. This sticky pad could be exactly what you need to get a good grip on the stuck part of your tank and finally twist that sucker apart.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
Can you open a freezer tank if it's frozen?
In other words, if the gasket is the problem, the freezer will loosen the connection and you'll have no trouble at all opening your tank once it's frozen. just be sure not to accidentally freeze your hands to the tank when you try to un-stick it for the first time out of the freezer.
Do you need a jar opener for vaping?
Don't have a jar opener? That's okay. Even more, homes have at least one pair of (possibly forgotten) rubber gloves. Check under the kitchen and bathroom sinks, in the utility drawers, around the laundry area, and in the mop bucket if you're not sure. These are thicker than jar opener pads, but give your hands the absolute bonus when it comes to pain-free friction applied to twist that vape tank.
Why is my vape tank stuck?
A stuck vape tank is caused by an increased friction between the rubber rings and the part where the tank unscrews. There a few tips to prevent this from happening. Regularly checking the O-rings. Old O-rings can become cracked, which means they can leak out e-juice. When the e-juice dries, it gets thick and sticky which will make your tank get ...
How to unscrew a tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
What happens when you top up e-liquid?
Be careful when you top up your e-liquid: All vapers have made a sticky mess when topping up their e-liquid. If the e-juice gets between your O-rings, the glass and the tank, it makes them sticky and difficult to move. So, be careful when topping up!
How long to put a scuba diving tank in freezer?
Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen.
Can you vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping.
How to stop a vape from getting stuck?
How to Stop Your Vape Tank From Getting Stuck. Make sure you are only tightening your tank enough to prevent leakage, as overtightening can lead to stuck parts. Having to retighten a tank is better than having to replace a setup. If parts of your device end up permanently broken and you need to purchase a new tank, ...
What happens when you get stuck in vape setup?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device. ...
Why is my vape tank jammed?
Vape Tank Jam. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
What happens if you unscrew the tank?
If you are having trouble unscrewing the tank to replace e-liquid, you are dealing with a tank jam. However, if you are having trouble detaching the tank from your device, you need to unstick the tank.
What to do if your tank is stuck?
If your tank is truly stuck, prepare for some more fragile pieces to break in the process of fixing your tank. If you are still unable to fix the stuck tank, you may need to decide between getting an entirely new device or breaking a portion to get them apart.
Can you remove a tank stuck to a mod?
In some cases, your tank may simply be stuck to your device. This is a bit riskier since a botched fix would require more than simply a replacement tank. When attempting to remove a tank stuck to a mod, take care to avoid injuring the device or yourself via the battery.
Scace New Member
I got my dripper (Vandy vape mesh) stuck to a mod (Tarot pro). I'm really hopeless, tried unscrewing applying little force, then much force, ended up trying to get it off with pliers - nothing.
stols001 Moved On ECF Veteran
Well, unfortunately it's attached to your mod which kind of limits your options as far as using heat or cold to help loosen it. You could try running some hot water near the base of your topper ,but you would have to be extremely careful.
Coyote628 Ultra Member ECF Veteran
Or you could try vise grip locking pliers. Put something like folded paper towel around base of rda to protect it and get a firm grip with the vice grips.
SomethingElse Full Member
Hi @Scace, it looks like you've received some pretty good advice already and I hope you find a solution to your dilemma. If/when you do, whether it was something suggested in this thread or concocted elsewhere, I hope you'll be inclined to share what did (or did not) work for you.
Hawise Ultra Member ECF Veteran
Freezer might work and it cold doesn't harm batteries or electronics for a short period (I don't think, I don't know that to be 100% true.
