How to unscrew a vape tank?
Usually, there need to be a few other steps included to fully unscrew the vape tank First, after unscrewing as much as possible, of course - make sure there's no e-liquid left in the tank. Next, run a tiny screwdriver through the airflow slots and tap around a bit to loosen up the seals.
What to do when your vape mod stops working?
This is particularly useful if your vape mod stops working suddenly. Knowing exactly how to disassemble your device and thoroughly examine each part will give you the information on what parts need fixing and on what stopped working. One of the most difficult parts of a mod to take apart is the firing button.
Can You disassemble and reassemble your vape mods without hiccups?
Fortunately, there are some good tips and ideas that will help you properly disassemble and reassemble your vape mods with no hiccups. This is particularly useful if your vape mod stops working suddenly.
How does a vape tank work?
As you vape down the e-liquid, the pressure rises within the tank. There is always a little bit of ejuice around the seals of the tank and it creates that vacuum.
How do you get a key lock off a vape?
0:291:31How to turn key lock off and on! On Wismec Reuleaux RX2/3 Vaporizer ...YouTubeStart of suggested clipEnd of suggested clipAnd it reminds me key lock is on so in order to remove it all you do is fire up the LCD. ScreenMoreAnd it reminds me key lock is on so in order to remove it all you do is fire up the LCD. Screen again you hold your settings button down. And key lock is now.
How do you unlock a reuleaux rx200?
2:564:49Reuleaux RX200 by Wismec (TUTORIAL) - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut we cannot adjust any of our settings using the power up or power down buttons and unlock wouldMoreBut we cannot adjust any of our settings using the power up or power down buttons and unlock would just hold power up power down and it will say unlock.
How do you change a Wismec coil?
2:478:45Wismec Reuleaux RX75 Full Kit by Jay Bo Designs - Tutorial & ReviewYouTubeStart of suggested clipEnd of suggested clipIt also has hidden adjustable airflow. And to change the coil you simply unscrew the bottom base.MoreIt also has hidden adjustable airflow. And to change the coil you simply unscrew the bottom base. And pull the coil right out now as for the coal.
How do I reset my Wismec?
0:322:03Puff And Time Counter Reset - WISMEC RX Gen 3 ReuleauxYouTubeStart of suggested clipEnd of suggested clipAnd you see the puff counter resets to zero from there we're going to do the same for the time. SoMoreAnd you see the puff counter resets to zero from there we're going to do the same for the time. So again push the power button three times push the left button.
What does imbalanced batteries mean on vape?
Q: Why the device always show "imbalanced" ? A: For the imbalanced message, it means the voltage among your 3 batteries are not imbalance. The difference is higher than 0.3V. Please check your batteries again. We suggest you to change another 3 high-rate batteries with same parameter.
How do you remove a coil from a vape?
How to Change a Vape Coil in a Pod SystemWhen the pod is empty, remove it from the device and hold it upside down.Twist the pod's base to loosen and remove it. ... Pull the old coil out of the pod.Push a new coil into the pod.Replace the pod's base and refill the pod.
How do you remove a coil from a tank?
0:282:20How To Change Your VAPE Coils! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you need to do is squeeze the bottle. First then insert it tilt it over and what you'll do isMoreAll you need to do is squeeze the bottle. First then insert it tilt it over and what you'll do is suck the juice back into the bottle as you're releasing it even if it's not a lot of juice.
How do I change a coil?
3:075:16Vape Tutorial: How To Change Coils On Vape Tanks & ClearomizersYouTubeStart of suggested clipEnd of suggested clipStart by applying a firm grip to the base near the bottom of the tank. With your other hand beginMoreStart by applying a firm grip to the base near the bottom of the tank. With your other hand begin twisting the top portion of the tank in a counterclockwise manner. Now that the coil head is exposed.
Welcome to Jay Bo Designs
My name's Jay Bo, and I'm a modder. My first creation was the Tobh Atty.
Products
Jay Bo Designs is proud to present our painstakingly designed, skillfully crafted product line.
Opening A Jammed Vape Tank
If you have a “muscular” pair of hands, and can firmly grip the tank, then you’re good to go. Take note that a vape tank is fragile and should be handled with a lot of care. You should only apply pressure to the right part of the vape tank. Besides, numerous tools can help you open a jammed vape tank:
How To Unscrew A Stuck Vape Tank?
This is probably the easiest way of separating a jammed vape tank from your mod. Here, you can use a non-stick piece of cloth, even a chamois cloth will do a good job, grip your vape tank and twiddle it off. Additionally, a pretty old, rough, and stiff cloth has a better “grippiness” as newer ones might be a bit sleeper.
Tank Stuck To Vape Battery
In some cases, the vape may not only be stuck to the mod but also the batteries. This is way riskier because any botched solution would mean replacement with an entirely new tank. When trying to open a vape tank stuck to vape batteries, be extra careful not to destroy the tank and the mod altogether.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
How many watts do you need to vaporize dry herbs?
are specially designed to vaporize or combust the dry herbs. By vaping the herbs, you cut out all the carbon monoxide and carcinogens that combustion produces. You will only need to supply your dry herb atomizer with a small number of watts for it to work efficiently whether combustion or not. We recommend running it between 7 to 12 watts to avoid damaging the coil.
How many threads does a box mod have?
Each variant can be found online or in most vape shops. Most box mod vapes accept only 510-threaded devices, so ensure the atomizer you choose will screw on to your mod properly. 2. Fully Charge Your Box Mod - If you just got your box mod, you will want to fully charge it if you plan on going on a long adventure.
What charger does a mod come with?
Most devices will come with a micro USB charger that plugs into the mod and then a USB outlet. Other devices may have removable batteries that can be charged with either USB or a special dock to charge. The mod will come with a booklet on how to properly remove the battery, though most will slide right out.
What is a box mod?
Box mod vapes are a unique and powerful way to vape. They come in all sizes, colors and have a wide range of capabilities not usually found in other more basic vaporizers. Box Mod Vapes give you complete control over the vaping experience by allowing you to adjust the watts or temperature control up and down in very small increments.
Can you use a box mod on a wax atomizer?
Box mods are also great for wax atomizers. Normal vape pen batteries do not have enough power to properly vaporize wax. A box mod is more than powerful enough to turn wax concentrates into a plume of flavorful vapor. It may take a few seconds of holding the fire button before the coil is hot enough to vaporize the wax.
Do box mods work with vape pen?
They come ready to vape, all you need is a battery. Box mods work well with these cartridges and will hold a charge much longer than a vape pen. However, you want to use a lot less watts than you would with other attachments as the coils in these cartridges are very small and delicate.
By Wismec
This item has been Discontinued. Vapor Authority recommends the following alternative products:
Authenticity you can count on
We are proud to carry 100% authentic products direct from the top manufacturers in the industry. We guarantee all products we carry to be genuine and you can rest assured nothing you receive from us will ever be a clone or knockoff.
Customer Service is our top priority
We take customer service very seriously and will do our best to keep our customers happy. Send emails to [email protected] or call 888-927-VAPE to report problems or concerns. We also invite our customers to send suggestions or requests for any product we may not currently carry.
Quality Without Compromise
We strive to carry the finest vaporizing products at the lowest prices available. Our products are tried and tested by experienced "Vapers" who have taken the time to sift through the countless products on the market.
Check our our review of the Reuleaux RX75 – a new mod from the company that created the Reuleaux RX200 and Reuleaux DNA 200!
In this piece we’ll be taking a look at one of Wismec’s newest mods, the Reuleaux RX75, which was created by the combined brainpower of Jay Bo and Twisted420 — two of the biggest names in the vaping space right now.
Wismec Reuleaux RX75 Review: Packaging
The Reuleaux RX75 comes in the same packaging as the Reuleaux RX200 and Reuleaux DNA 200. A nice sturdy black box with the front having the image of the device and the back with all the contents and some information about the Reuleaux RX75.
Wismec Amor mini Sub-Ohm Tank Review: Design and Performance
Cute little bugger. Fits the RX75 perfectly, Jay Bo and Twisted420 did a great job with this. The Amor mini is short but built solidly. The coils are amazing and wick just like Herakles coils. The flavour is really good on the Amor, in fact, to be honest I would say it almost ties the Herakles Plus on flavour.
Wismec Reuleaux RX75 Kit Review: Conclusion
A great stealthy styled setup. Performance is top-notch and battery life is great. Also, with the kit option there’s no need to swap out the tank, as the Amor mini is a great little performer and well worth spending some time with.
How To Use The Reuleaux RX200 Box-Mod: Basic Setup
Powering ON and OFF the device: Press the fire button 5 times quickly.
How To Use The Reuleaux RX200 Box-Mod: Vaping Modes
Switching between TC/VW modes: With the device on, press the fire button 3 times quickly and then use the up or down to select the desired mode and press fire button to confirm the selection.
How To Use The Reuleaux RX200 Box-Mod: Safety Features Explained
No Atomizer Alert: If no atomizer is detected the OLED screen displays “No Atomizer”. This usually means that you’re atomizer isn’t connected properly; make sure the tank is secured properly – this usually fixes any issues. If that doesn’t work… make sure you actually have a coil installed.
How To Use The Reuleaux RX200 Box-Mod: Best Practices
Some atomizers have a longer 510 than others. One should be careful to not over tighten the atomizer onto the mod as this could damage the 510 connection.
How To Use The Reuleaux RX200 Box-Mod: Updating The Firmware
To update the firmware on your Wismec Reuleaux first visit Wismec’s website and download the firmware updater for your device — Mac and Windows are supported.
