Step 1. Unscrew the airflow base, located at the bottom of the tank, and gently pull the vape coil out from the tank. Step 2. Drip a few drops of e liquid onto your vape coil. Gently dousing the coil helps extend the coil’s lifespan. Then, re-insert the coil back into the tank.
Full Answer
How to unscrew a stuck vape tank?
If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
How to clean a dry vape tank?
Try soaking in very hot water to see if that will loosen the vacuum seal created by the dry tank (try not to ever vape it dry) or Soak the tank in vodka or alcohol.
How do I get my tank unstuck?
Get a piece of rubber band, wrap it around your tank tightly and securely, then twist it open bare handed. The added grip is usually enough to unstuck your tank. Simple but effective. For your reference, here is a video how to do the Rubber Band Wrap method:
Why is my vape tank stuck closed?
But sometimes, on fateful days when the planets are out of alignment, your vape tank gets stuck closed. Maybe the tank is jammed on the top of your battery/mod. Or no matter how hard you twist, you just can't separate the coil from the tank, or the tank from the top.
How do I unscrew a stuck vape tank?
All you need is to run the vape tank under falling hot water for some minutes, two to five at most. If you're using a mechanical mod (mech mod) remove the batteries and submerge your mod in a mixture of hot water and vinegar.
Which way do you unscrew a vape coil?
You may want to wrap your device in a paper towel to keep your hands from getting e-Juice on them. Next, simply flip your tank upside down and twist counterclockwise to remove your tank.
How do I change the coil in my vape tank?
To swap these coils, simply hold the glass tank casing, unscrew the base anti-clockwise, then unscrew the coil from the base in the same motion. Later add some drops of e-liquid on the wicking holes from your new coil.
How to unscrew a tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
Why is my vape tank stuck?
A stuck vape tank is caused by an increased friction between the rubber rings and the part where the tank unscrews. There a few tips to prevent this from happening. Regularly checking the O-rings. Old O-rings can become cracked, which means they can leak out e-juice. When the e-juice dries, it gets thick and sticky which will make your tank get ...
What happens when you top up e-liquid?
Be careful when you top up your e-liquid: All vapers have made a sticky mess when topping up their e-liquid. If the e-juice gets between your O-rings, the glass and the tank, it makes them sticky and difficult to move. So, be careful when topping up!
How long to put a scuba diving tank in freezer?
Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen.
Can you vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping.
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
What to do if someone is badgered into coming over?
If there's anyone else in your house or who can be badgered into coming over for any ol' reason, consider asking them to try opening the tank. Especially if they have larger hands, are visibly more muscular, or have a creepy tendency to perform feats of strength beyond their apparent capabilities.
Can you open a freezer tank if it's frozen?
In other words, if the gasket is the problem, the freezer will loosen the connection and you'll have no trouble at all opening your tank once it's frozen. just be sure not to accidentally freeze your hands to the tank when you try to un-stick it for the first time out of the freezer.
Do you need a jar opener for vaping?
Don't have a jar opener? That's okay. Even more, homes have at least one pair of (possibly forgotten) rubber gloves. Check under the kitchen and bathroom sinks, in the utility drawers, around the laundry area, and in the mop bucket if you're not sure. These are thicker than jar opener pads, but give your hands the absolute bonus when it comes to pain-free friction applied to twist that vape tank.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
How to unstuck a tank?
If you can’t get a piece of cloth to grip your tank properly, and you can’t source a pair of rubber gloves, rubber bands can work. Get a piece of rubber band, wrap it around your tank tightly and securely, then twist it open bare handed. The added grip is usually enough to unstuck your tank.
How to prevent a stuck tank?
To prevent stuck tanks, make sure you don’t screw it on too tight, and you clean your mod and tank at least every week. Clean the part in between the mod and tank to be sure no e-juice gets stuck and dried. After all, an ounce of prevention is worth 10mls of cure. OZ Vapour Team.
What to wear to unscrew a tank?
2. Rubber Gloves. If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
