How do I Turn on and unlock my smokvape?
Here’s a quick rundown of how to turn on and unlock your SMOKvape and what to do if you run into a problem. First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do I use Smok mods?
How To Use SMOK Mods: Quick Settings To Remember. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. From here, you can then cycle through the output settings.
How do I unlock my vape device?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time. Once your device is unlocked, press the main fire button three times to access the device menu.
How do you unlock a SMOK vape?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do you lock SMOK procolor?
If you want to turn it off, you need to either go into the menu; click the firing button until you see the Power Off option and then turn it off there, or you can lock the device by pressing the firing button 5 times and then holding the fire button down for about 5-7 seconds while it's locked.
Why does my SMOK vape say lock?
SMOK vapes have a lock system. This system is a protective measure to ensure that the vaporizer doesn't misfire while it's stored in your pocket or purse. Unlock your device, which you can typically do with 5 clicks in rapid succession.
How do I reset my SMOK vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do you use Smok procolor?
7:4314:54ProColor 225W TC by SMOK! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou would just long. Press. Long press again and that's your preheat so soft. Normal hard all thatMoreYou would just long. Press. Long press again and that's your preheat so soft. Normal hard all that stuff just like in other smoke. Mods will just go to normal.
How do you unlock Watts on Smok?
Three clicks of the fire button/bar allow you to switch vaping modes (wattage or TC of Ni, Ti, SS). Pressing both adjustment buttons at the same time locks and unlocks the wattage.
Why is my vape not unlocking?
The most common cause of having a locked vape is a dead battery. Try charging your vape for 10 minutes and unlock it to see if this has any impact on it. You will know that your vape is charging as most vapes emit a light to indicate the charging process.
How do you remove a key lock from a vape?
0:291:31How to turn key lock off and on! On Wismec Reuleaux RX2/3 Vaporizer ...YouTubeStart of suggested clipEnd of suggested clipAnd it reminds me key lock is on so in order to remove it all you do is fire up the LCD. ScreenMoreAnd it reminds me key lock is on so in order to remove it all you do is fire up the LCD. Screen again you hold your settings button down. And key lock is now.
How do you take the power lock off a vape?
4:028:23SMOK NORD 4 - Now with More Power! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape itMoreOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape it. And then if you want to turn it on or off will be five clicks one two three four.
How do I reset my SMOK password?
Enter the email associated with your SMOK account and we will send a link to the reset page.
Why is my SMOK not working?
SMOK Wave Not Hitting If your SMOK Wave isn't hitting, the first thing that you should do is try charging the battery. It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod.
Why does my SMOK stopped working?
SMOK Vape Won't Turn On If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
Why do people like Smok mods?
It’s not unusual to hear beginner and advanced vapers alike sing the praises of mods by SMOK, mainly because the brand’s diverse product line-up offers exceptional options to suit every vaping style, experience level, and price point.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
What happens if you hit the limit on vapor?
Once you hit that limit, your device will no longer produce vapor. While this function is convenient, it can also confuse users who are still new to the device.
How to fix no coil on tank?
Confirm that the coil is screwed in well. Remove the tank hand and carefully turn the coil so that it’s screwed in a little tighter . This is one of the most commonly-effective solutions to a “no coil” error message.
How to reset puff counter?
Reset the puff counter by selecting “puff clear” on the mod’s navigation menu.
What mode to use for SMOK coil?
If you’re just running the SMOK coil that came with the kit, just stick to wattage mode, as that is designed for standard power modes.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How many times do you wake a Smok mod?
Once you’ve unboxed your SMOK mod, and you have installed the correct batteries in the right orientation, simply click the fire bar FIVE times to wake the mod. There will be a short boot-up time, where you see the SMOK logo, and then, once all the software is booted, the settings menu will appear on the display.
What are the different vaping modes?
In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
What is Trailblazer vape juice?
But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. It’s rich, sumptuous, and very much an all-day vape and personal favorite of mine. I highly recommend this juice.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
What program is used to program SMOK?
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.