What is the 88 vape 50 watt mod starter set?
Designed to provide all the power of a chunky box mod with the sleek styling of a traditional vape pen, the 88 Vape 50 Watt Mod Starter set is perfect for anyone looking to try out sub ohm vaping without carrying round a huge battery all day.
How to change wattage on Smok mod?
Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. From here, you can then cycle through the output settings. How To Change Wattage In TC Mode: press the fire bar and the up button at the same time.
How do I set up my vape mod?
Once inside Settings, you can move through the menus using the UP and DOWN keys on the mod. The first setting you will encounter is the MODE SETTING. In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
How do I unlock my vape kit?
, Professional in Ecigarette Since 2011. Generally, click 5 times is turning the vape device ON/OFF. Here in following are the ways to unlock your vape kits in most vape kits: 1. Press Fire Button and "+" Button at same time; 2. Press Fire Button and "-" Button at same time; 3. Press "+" and "-" at same time.
How do I unlock my digital vape?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
How do you unlock a vape button?
0:050:47Voopoo Vmate 200W - How to Lock / Unlock the Fire Button - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd maybe it happened while it was in your pocket or something like that and you don't know how toMoreAnd maybe it happened while it was in your pocket or something like that and you don't know how to unlock it it is done like this hold down the UP button and the fire button at the same time.
How do you unlock a vape cartridge?
Make Sure The Battery Is Unlocked To unlock or lock an OK Ego Vape Pen battery, simply press the button 5 times in quick succession. The blue LED on the battery's button will flash 3 times to indicate that it has been locked or unlocked.
How do you unlock voltage on a vape?
0:161:44How to Switch Between Voltage and Wattage Mode on an Eleaf iStick 50wYouTubeStart of suggested clipEnd of suggested clipEither way you've come here to get the solution here it is it's gonna be so easy that you're neverMoreEither way you've come here to get the solution here it is it's gonna be so easy that you're never gonna forget it. You know how you turn your AIESEC on and off with five clicks.
Why is my vape not unlocking?
The most common cause of having a locked vape is a dead battery. Try charging your vape for 10 minutes and unlock it to see if this has any impact on it. You will know that your vape is charging as most vapes emit a light to indicate the charging process.
How do you turn the power lock off on a vape?
3:548:23SMOK NORD 4 - Now with More Power! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape itMoreOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape it. And then if you want to turn it on or off will be five clicks one two three four.
Why is my DAB pen locked?
When You First Receive Your Vape Pen, It Will Be Locked. Generally, when you first buy your vape pen, it will be in the locked position. This is for safety reasons as well as giving protection to the battery. However, you do need to check whether it is on or off when you first open the packaging.
How do you unlock a Smok?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do I unlock my vape geek?
If your Geek Vape Aegis Hero isn't hitting when you hold the fire button, you should first check to confirm that you haven't locked the device. Press the fire button five times to unlock it. If the Aegis Hero still isn't hitting, the screen should display an error message telling you what the problem is.
How do you unlock Watts on Smok vape?
Three clicks of the fire button/bar allow you to switch vaping modes (wattage or TC of Ni, Ti, SS). Pressing both adjustment buttons at the same time locks and unlocks the wattage.
Why does my vape say power lock?
It features a 5 click lock system to prevent accidental misfires while your device is stored. To lock or unlock the device press the main fire button 5 times in quick succession. You can power your device off to conserve battery life by entering the menu system.
How do I change the voltage on my vape?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Does a coil last longer with a temperature locked coil?
Increased Coil Life Span: With the temperature locked, you’re not maxing out the coil every time you vape, which means the coil head will last longer. You Use Less Vape Juice: Again, with the temperature locked in, you can find a sweet spot where you get great flavor at lower temperatures (and, therefore, power).
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
Vapmod V-Mod 2 Vaporizer Mod
The Vapmod V-MOD 2 Battery Mod is a new upgrade to the older variant, providing a vibrating haptic feedback, 900mAh battery, and magnetic quick release system.
Ratings & Reviews
The products available on Element Vape are age-restricted and intended for adults of legal smoking age only. All orders placed on the website will be verified by an industry leading Age Verification software for validation.