Switching On/Off Vaping Press the fire button 5 times within 2 seconds to turn ON/OFF the device. Hold the fire button and inhale through the mouthpiece.
- Press the fire button 5 times to power the device on/off.
- Hold the fire button to vape (the device will cease to fire after 8 seconds)
- Holding the fire and right menu button will change the colour scheme.
How do I adjust the wattage of my vape mod?
If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
What are vape mods and how do they work?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display. In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
How do I set up different vaping modes?
In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running. If you’re just wanting to vape, and aren’t bothered about doing anything fancy, just stick the mod in W (wattage) mode and adjust the wattage accordingly.
How to find the best wattage for your vape tank?
Three Rules For Finding The Best Wattage For Your Vape Tank 1 Start Low. Even If Your Tank Says It Can Handle 150W, Start At 60W And Work Your Way Up 2 Higher Wattage Does Not Mean Better Vaping. I’d Rather Vape At 60W And Conserve My Coil Heads 3 Most Modern Sub Ohm Tanks Will Not Require More Than 80W – Even The High-Power Ones.
How do you turn off a mod vape?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
How do I turn my vape off?
Often this will be a series of flashes from the LED. Now simply hold the fire button as you inhale on the device and you're vaping! To turn off your e-cigarette, repeat the series of 5 button clicks. Again, there will be an indication that the device is off; normally a series of blinks from the LED.
How do I turn my vape off when not using it?
It is important to turn off your vape device when you are not using it. Otherwise, it might go off in your pocket or handbag. This constant and prolonged firing can cause your coil to burn out and e-juice to be wasted. To turn your vape device off, you will need to click the power button 5x.
How do I lower the wattage on my vape?
Once you know your coil's wattage rating, start at the very bottom wattage. Then, gradually turn it up by a watt or two at a time, taking an inhale in-between. If your vape becomes too harsh or hot or tastes burnt, you know it's a little too high, so turn the wattage back down.
Do vapes turn off automatically?
When you're done vaping, you'll simply put the device down. Since it only fires when you take a pull, the disposable vape will automatically turn off when not in use. If your disposable vape does have a power button, five quick clicks are the industry standard to turn most vapes on.
How do lungs heal from vaping?
However, there are certain lifestyle behaviors you can practice to try and accelerate the rate at which your lungs heal.Drink Lots Of Water. ... Eat Healthy Foods. ... Exercise Regularly. ... Cough. ... Clean Your Living Space. ... Practice Deep Breathing. ... Try Steam Therapy.
How often should I turn off my vape?
While most e-cigs and high-quality vaporizers have a built-in safety shutdown mode that automatically turns the device off after 10 seconds, some don't. Generally speaking, most vaporizers don't use that much power when they are idle, but you should still turn them off after each use.
What happens if you leave vape on?
The good news is that your e-liquid will not be dangerous to use. Nothing in the juice can turn toxic just by heating up slightly, but it still won't be very pleasant to use. The best thing to do is throw the e-liquid away and, if it's your whole e-cigarette that's been left in the heat, change the coil too.
Should I turn my vape off when charging?
The power from your battery will be lost if your vaporizer is on. You can save a lot of battery by turning it off.
What Watt should my vape be on?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
What settings should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What happens if you vape at too low of a wattage?
Since the smoke is thicker at a higher temperature, this also gives you a harder hit to the throat, if you prefer to have that experience. The only downfall of this is that it shortens the battery life of your vape since you use a higher wattage.
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
What is power mode?
Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.
What coils are used in power mode?
Pretty much all coils need to use with this mode, you can use Kanthal, stainless steel (SS), and nichrome ( nickel -chrome) coils. most of readily made coils are made out of Kanthal Wire, which is why power mode tends to be oh-so-popular among users of different expertise levels.
What is VT in heating?
Temperature Control, or as referred to sometimes as Variable Temperature (VT), is a very useful mode where you set the exact temperature threshold for heating your coils steadily. TC wires are limited to their own specific setting, as their individual heating properties vary. While using this mode, make sure that you use the correct mode for the wire of your coil.
What is bypass mode?
Bypass mode gives you the experience of raw power of your battery to heat your coils. Here you can build your coils at lower resistances than is normally accepted by power or temperature control mode, meaning that the power of the hit will be determined by the sheer state of you battery and the resistance of the atomizer.
Can you set a temperature control?
You can set personalized power or temperature control settings for your convenience. On select devices, if you have a few different power or temperature settings that you normally use, you can set these as memory settings to you can easily scroll through them to change from one setting to another.
How many watts do you need to vaporize dry herbs?
are specially designed to vaporize or combust the dry herbs. By vaping the herbs, you cut out all the carbon monoxide and carcinogens that combustion produces. You will only need to supply your dry herb atomizer with a small number of watts for it to work efficiently whether combustion or not. We recommend running it between 7 to 12 watts to avoid damaging the coil.
What charger does a mod come with?
Most devices will come with a micro USB charger that plugs into the mod and then a USB outlet. Other devices may have removable batteries that can be charged with either USB or a special dock to charge. The mod will come with a booklet on how to properly remove the battery, though most will slide right out.
How many threads does a box mod have?
Each variant can be found online or in most vape shops. Most box mod vapes accept only 510-threaded devices, so ensure the atomizer you choose will screw on to your mod properly. 2. Fully Charge Your Box Mod - If you just got your box mod, you will want to fully charge it if you plan on going on a long adventure.
What is a box mod?
Box mod vapes are a unique and powerful way to vape. They come in all sizes, colors and have a wide range of capabilities not usually found in other more basic vaporizers. Box Mod Vapes give you complete control over the vaping experience by allowing you to adjust the watts or temperature control up and down in very small increments.
Can you use a box mod on a wax atomizer?
Box mods are also great for wax atomizers. Normal vape pen batteries do not have enough power to properly vaporize wax. A box mod is more than powerful enough to turn wax concentrates into a plume of flavorful vapor. It may take a few seconds of holding the fire button before the coil is hot enough to vaporize the wax.
Do box mods work with vape pen?
They come ready to vape, all you need is a battery. Box mods work well with these cartridges and will hold a charge much longer than a vape pen. However, you want to use a lot less watts than you would with other attachments as the coils in these cartridges are very small and delicate.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
What is the ECO mode on a tank?
When your battery is lower than 40%, it will automatic provide an option to go to ECO (Power ECO) mode. When your install the tank with temperature heating wire (SS, Ti, Ni), it will automatic provide an option to go to STC (Smart TC) mode.
How to reset a sprite tank?
3) Continuously pressing mode button 3 times to unlock the mode button. 4) When install a tank, it will automatic identify its coil material and resistance, press up (+) button for reset, ...
Can you leave a charging device unattended?
Do not leave the charging device unattended. Do not drop, throw or abuse your device, it may cause damage. Please use a standard USB output charger in proper charging Current and Voltage range. Keep away from water or any flammable gas, liquid. Do not exposure to direct sunlight, dust, moisture or mechanical shock.
What is a VW mod?
A VV/VW mod has the ability to customize the output which can be helpful in a variety of ways, it allows the flexibility to quickly change and use a wide variety of atomizers with different resistance, coil types and wire sizes. The ability to adjust the output power also allows users to control the amount of heat generated by their coils which can change the flavor of or burn certain e-juices and help adjust if the user wants to take shorter or longer pulls to create the same amount of vapor. With these devices a few button clicks is all it takes to readjust and you are ready to go
What is the difference between a VV and a VW?
Size: Since these mods need space for their circuitry and wiring to perform comparably or out perform mechanical devices VV/VW mods are often larger than fixed voltage regulated mods or mechanical mods and the smaller VV/VW mods often will have a shorter battery life, lower output maximum output power, and smaller usable resistance range.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What is sub ohm tank?
Sub-Ohm tanks are designed to produce more clouds. They do this by having a lower resistance (0.2ohms, for instance), and this allows for less electrical resistance which in turn allows for more signal to flow to the atomizer.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
Step-by-Step Guide to Using a Box Mod
Although their complexity might seem overwhelming at first, using a box mod like SteamCloud’s Box Mod Vape is not meaningfully more difficult than any other kind of vaporizer. Below, we will quickly outline the general process:
Box Mod Vape Tips
With these core criteria in mind, please take a moment to read through some tips that can help you get more out of your box mod.
Using 510 Atomizers with your Box Mod
Because most box mod batteries can work with any 510-threaded atomizer, they allow you to work with just about any material you choose, including oils, waxes, other concentrates, and even dry herb.
Troubleshooting Your Box Mod
If you encounter issues with your box mod, here are some tips that can help you troubleshoot the situation: