Vaporesso Swag Starter kit User Manual Unknown 7:11 PM 0 How to Use Switch On/Off: Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses. Vaping: Hold the fire button and inhale through the mouthpiece.
How do I set up my vaporesso swag?
Nov 07, 2012 · Shirts, Hats and all other apparel not only look good on you, but it helps to spread the word about electronic cigarettes. On top of that, wearing some of this swag can help promote your favorite vendor too. Another great thing about wearing vape swag is that it lets other vapers know they aren’t alone and that you’re a vaper also.
How do I use the vaping feature?
Jul 05, 2018 · A step by step tutorial on how to navigate the settings on a Vaporesso Swag Kit. Since 2014 our passionate family team has been delivering the highest stand...
How do I use the user manual for the swag starter kit?
Vaporesso Swag Starter kit User Manual. Switch On/Off: Press the fire button 5 times in quick succession within 2 seconds to turn the device on. In the same way, the device will be powered off after 5 presses. Vaping: Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.
How do I switch modes on my vape?
Sep 03, 2018 · D4CT3RR New Member. Sep 2, 2018. Hi, I bought a Vaporesso Swag Kit today and when I went to turn it on, it did not work. I have tried 2 LG 18650's that I got from Amazon and I inserted them the right way. I also tried to plug it into my laptop and a …
How do you use a swag vape?
How do I turn my Vaporesso on?
- Press the fire button for 5 times in 2s: Power on and off.
- Continuously pressing fire button 3 times to lock and unlock the up, down and mode button.
- Continuously pressing mode button 3 times to unlock the mode button.
What to do when vape wont turn on?
- Check if you've pressed the power. Check if you've pressed the power button too often and turned it off. ...
- Check if you need to charge it. ...
- Check for connection issues. ...
- Check our Battery Safety page. ...
- Check your atomiser. ...
- Check your 510 pin. ...
- Check your coil. ...
- Check your tank isn't over tightened.
How do you set up vape Vaporesso?
- Step 1: Filling the e-juice.
- Step 2: Install the tank. When in SS/NI/TI (VT) mode, atomizer's type need to be recognized when a new one is installed. ...
- Step 3: Power on the device. Turn device on by pressing the power button 5 times in 2 seconds, repeat to power off. ...
- Step 4: Choose your favorite mode.
How do you turn on a Vaporesso swag 2?
How do I reset my swag vape?
Why is my vape flashing and not working?
Why is my dot vape not working?
How do I unlock my Vaporesso swag?
How do you open Vaporesso swag?
What is a swag 2?
As the second generation of SWAG family, SWAG 2 (or SWAG II) has many upgraded features that could incredibly enhance your vaping experience. The textured coating (made by a special formulated rubber) around the ergonomic body gives you a unique hand feeling that comforts the griping a lot, much lighter and more durable, it’s also anti-fingerprint and anti-scratch, so no more concerned about placing your device with the keys after vaping.
How long does it take for a vape to stop working?
Overtime Protection: The device will stop working if you vape for more than 10 seconds at a time, and “OVER TIME” will show on the screen.
How to adjust airflow volume in a tank?
Twist the air-inlet ring on the bottom of the tank to adjust the airflow volume.
What does Pulse mode do on a tank?
When the tank is installed, the device will enter the PULSE MODE automatically to boost flavor with large cloud continuously.
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
What kind of cartridges do oil vapes use?
Most of the oil vape batteries we sell are made for 510-threaded cartridges. Be sure to check what threading your battery has, and purchase cartridges that fit your battery.
What is the bottom airflow cartridge?
Bottom-airflow cartridges have an air hole in the middle of the pin on the bottom of your cartridge. This allows the battery to activate when you inhale. Bottom-airflow cartridges will work with inhale and button activated batteries.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
What does H/N/S stand for in VW?
1) Smart VW mode: As an advanced Variable Wattage mode, there are 3 levels of VW: H stands for High; N stands for Normal; S stands for Soft. The default setting is Normal. VW (H/N/S) will guarantee your mod's ability to skillfully select the adequate average wattage for your atomizer, according to its resistance reading, automatically.
How to adjust airflow on pyrex?
Adjustment of Air Flow: The top airflow system can be adjusted with slight twisting motions of the top lid which will not loosen its attachment to the pyrex glass.
How to lock resistance on TC-Ni?
Lock/Unlock resistance: In TC-Ni/TC-Ti/TC-SS/TCR (M1, M2) Mode, press the "-"and mode button simultaneously for 2s will lock/unlock the resistance level, “ ” will appear on the display. Attach a new atomizer will not change the locked resistance. Automatic atomizer recognition: To achieve better temperature control effect, the mod will ask the user if the new atomizer is attached. " OLD LOAD: -, NEW LOAD: + " will appear on the display. If a new atomizer is attached, press " + ", the mod will read new resistance; if not, press " - ", the mod will read at locked resistance.
D4CT3RR New Member
Hi, I bought a Vaporesso Swag Kit today and when I went to turn it on, it did not work. I have tried 2 LG 18650's that I got from Amazon and I inserted them the right way. I also tried to plug it into my laptop and a wall adapter through USB. Still no luck.
Izan Vaping Master ECF Veteran
If the batteries are positive DOWN, they should work if the cap is reattached.
D4CT3RR New Member
If the batteries are positive DOWN, they should work if the cap is reattached.
How to use a e-liquid drip?
1) Regular Version. Twist the top cap and fill the e-liquid through the slot. -. Lock the top cap back into place. Please wait for 5 minutes for the e-liquid to soak into the coil. 2) Child-protection Version. Pull out the drip tip and twist the top cap. Fill the e-liquid through the slot.
What does Pulse do on a tank?
When the tank is installed, the device will enter the PULSE MODEautomatically to boost flavor with large cloud continuously.
Is the Swag II a vape?
The Swag II is an old product on the vape market. However, are there any problems in the process of using it? Don’t worry, here are complete guides on how to use it correctly.
What is a swag kit?
The Swag kit, the Vaporesso newest box mod kit, is a full triple-threat in each category. First, it snuggles into the palm of the hand with its 2.9 x 1.8 x 0.98 inches dimensions and 64g weight. The Swag also features a different design aesthetic with the inclusion of an IML (in-mold label) face-plate that adds to its durable and easily grippable facade.
What tank is the Swag?
Despite being a Vaporesso tank, the NRG SE sub-ohm tank the Swag comes with recalls a SMOK design. It looks like the Big Baby or the TRV8 with the orange O-Rings inside. The chimney inside is slightly broad and looks like it would provide a considerable amount of vapor.
How many vape modes does Vaporesso have?
The Vaporesso also has three different (high, normal, and soft) vaping modes dependent on which coils vapers are using in the atomizer. So there are plenty of adjustable features on this Vaporesso Swag.
How many watts does an iMini Vaporizer have?
It has a neat build, however, it only comes in black, which is not nearly as fun as the Swag Kit. It also only outputs 15 watts of direct output, instead of the impressive 80 of the Vaporesso.
How to turn on Vaporesso mod?
To turn on the Vaporesso device, click the firing button five times. If there is no atomizer attached, the OLED screen will display a “change atomizer.” When connected the NRG SE to the tank, the smart mode on the mod will automatically adjust the wattage to the attached tank, just like with the Revenger and the Tarot.
How many watts does a GT2 vape tank have?
The tank comes pre-fitted with a GT2 0.5ohm coil and has a companion GCell coil that has 0.5ohms of resistance. The GT2 vapes best within the range of 40-80 wat ts and the GCell within the scope of 20-35W.
How big is a Vaporesso tank?
The diameter of the tank only measures 22mm (0.98 inches), so Vaporesso decided to keep it small rather than go for that extra-wide tank. The 22mm tank is also because anything wider would not be able to fit onto the mod, given its proximity to the battery top cap.
