Fill it with your preferred e-liquid flavor. Turn on your smoke vape with the fire button. Essentially, this is the main button that turns the device on/off.
What do I do if I have spilled ejuice on my nebox?
After you finish screwing on your tank and coil section, start by wiping down the NEBOX Mod if you have spilled any ejuice. This will prevent from any ejuice leaking into you IMR battery section.
How do I Fill my kangertech nebox with ejuice?
Once you have completely soaked your coil with ejuice, move onto filling your tank. Tilt the KangerTech NEBOX Box Mod to ensure you will not fill any juice down the center tube (this is where you inhale from).
Can I over tighten my nebox?
CAUTION: do not over tighten. Ejuice has a tendency to get very sticky and if you over-tighten your tank, you may not be able to get it off without pliers, no one wants an ugly NEBOX, so don’t do that. After you finish screwing on your tank and coil section, start by wiping down the NEBOX Mod if you have spilled any ejuice.
How do I Turn On my vape?
Once your device is unlocked, press the main fire button three times to access the device menu. Your menu may vary slightly depending on your model, but at this point, your mission has been a success: you’ve turned on your vape.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
What kind of cartridges do oil vapes use?
Most of the oil vape batteries we sell are made for 510-threaded cartridges. Be sure to check what threading your battery has, and purchase cartridges that fit your battery.
What is the bottom airflow cartridge?
Bottom-airflow cartridges have an air hole in the middle of the pin on the bottom of your cartridge. This allows the battery to activate when you inhale. Bottom-airflow cartridges will work with inhale and button activated batteries.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
How to turn on a nebox?
2. To turn on the NEBOX, simply click the fire button 5 times rapidly. Please note that you must click the button rapidly in order for it to turn on. To turn the NEBOX off, click the fire button 5 times again.
Where is the OLED screen on a Nebox?
Kanger placed the NEBOX’s OLED screen on the side of the device next to the fire button and adjustment buttons. The large and clear screen conveniently provides you with a host useful information. You can easily check the resistance of the atomizer coil being used, the wattage, the temperature, the remaining battery life, and view the duration of each puff.
What coils are used in the Kanger Nebox?
Adding to the versatility of the Kanger NEBOX are the various atomizer coils available to use with it. You can select between 0.3 ohm and 0.5 ohm stainless steel atomizer coils (SSOCC), or the 0.15 ohm nickel co ils. Brilliantly, Kanger designed the NEBOX to accommodate the Subtank OCC coils as well. This is a wonderful feature, as it permits you to use the same coils you have for your Subtank with the NEBOX. Regardless of the coils you select, all of them are made using Japanese organic cotton. This not only provides for a much tastier vapor, but is also free of the impurities found in standard cotton, such as bleach.
What is the wattage of a Kanger Nebox?
The Kanger NEBOX is a variable wattage device, with a wattage output range of 7W to an impressive 60W in 0.1W increments. With this wide span of available power, the NEBOX can be used with virtually any resistance atomizer coil. The ability to regulate the wattage is not only fantastic due to the customizability of your vaping experience, but is also very useful when alternating between e-liquids of varying PG-to-VG consistencies.
What is the Kanger Nebox?
From its beautiful aesthetic appearance, to its technologically advanced chip, to the plethora of features is provides, the Kanger NEBOX kit is one of the most impressive electronic cigarettes currently on the market. Designed for ease of use and versatility, the NEBOX is sure to please beginner and advanced vapers alike.
What temperature does a Ni-200 atomizer coil have?
When used with nickel (Ni-200) or titanium atomizer coils, the NEBOX allows you to adjust the temperature of the atomizer coil itself from between 200° F to 600° F (100° C – 300° C). This is a truly magnificent capability, as it provides for cooler or warmer hits depending on your personal preference. Additionally, the ability to adjust the temperature of the coil helps prevent flooding and gurgling when using various e-liquids.
Where is the atomizer coil located?
2. Unscrew the atomizer coil, which is located beneath the mouthpiece and chimney.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Why is my smok vape not charging?
It could be that your firing pin has vape juice on it , or it might not be coming in contact with the charger.
How to turn off Smok?
After you’ve enjoyed a good vape session, turn off your SMOK device by accessing the menu system again. Scroll through your options until you reach the power option, which may read “Power On” or something similar. Using the main fire button, change this to read “Power Off.”
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
What to do if battery is grimy?
If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Do you need to charge a vape battery?
The vape batteryneeds to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode.
