Innokin Go S is extremely easy to use. To get the pod started, you have to press the firing button five times. Your battery level will also be indicated by the LED indicator around the firing button.
Does my innokin vaporizer have a manual on/off switch?
Rarely, your Innokin vaporizer may include a manual on/off switch in addition to the typical 3 presses of the firing button. You’ll find switches like this on products such as the CoolFire IV and CoolFire Z50.
How does the innokin adept compare to other e-cigs?
Most e-cigs come with a 5-click on/off feature, however, the Innokin Adept did something that seems like a small change but is actually very smart design. The Innokin Adept only requires 3-clicks to activate or deactivate it.
Can you change coils on innokin e-cig starter kit?
Installing or Changing the Coil Your Innokin Adept e-cig starter kit comes with two coils. A 0.48 ohm coil comes preinstalled in the Zlide tank. You can use that coil or you can swap it out for the 1.6 ohm coil that also comes with kit or you can opt for the 1.2 ohm coil we sell separately.
How do I install the innokin adept?
The Innokin Adept is made up of three components: the main body that holds the battery, the Zlide tank and the drip tip. Assembly is easy. Affix the drip tip to the top of the Zlide tank and screw the tank into the body of the battery. You're good to go! Like most e-cig models these days, the Innokin Adept comes with an on/off feature.
How do I get my vape to turn on?
2:343:52How To Turn On Your Vape Device - YouTubeYouTubeStart of suggested clipEnd of suggested clipFive times fast for on five times fast for off two clicks uh preheat if your device allows for it.MoreFive times fast for on five times fast for off two clicks uh preheat if your device allows for it.
Why will my vape not turn on?
It has run out of battery Even if you think it is fully charged, this might not be the case and, simply put, if your vape device is out of battery, it won't turn on. So, the first thing you should do is try charging your electronic cigarette again and see if this makes a difference.
Why is my innokin vape not working?
If you try to vape and are stopped by a flashing button, this typically means the short-circuit protection feature has kicked in. The common culprit is wayward e-liquid; if there's any loose liquid near the connector points on the tank or battery, the device won't fire until it's cleaned up.
Why is my innokin Sceptre vape not working?
If you're still having trouble getting your Innokin Sceptre to work, the next thing that you should do is try removing and reseating the atomizer coil. The most common reason why an Innokin Sceptre doesn't vape is because the atomizer coil is only partially screwed in.
When I press the button on my vape nothing happens?
Try cleaning the battery terminal and end of your clearomiser with a cotton bud. Another thing to check is that the tank or clearomiser is making contact with the battery terminal. If a previous tank has been screwed on too tightly, the battery pin may need adjusting to make a connection again.
How do you turn on a rechargeable vape?
0:311:40How to use a vape pen - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you're good to go you take your vape cart. And screw it into the battery. You click theMoreAnd then you're good to go you take your vape cart. And screw it into the battery. You click the button five times to turn it on it'll. Light up and now it's ready to use inhale.
How do I know when my innokin vape is charged?
There is a charging indicator on the kit. This will light up red when on low power, yellow when your battery is on half power and green when it is almost fully charged. When the T18E battery is fully recharged the LED light with turn off.
How long does it take to charge a innokin?
three hours3 hours. It should take no more than three hours to get your Endura T20S battery from almost empty to full charge.
Why is my innokin t18 not working?
To resolve the issue, make sure that the coil fits snuggly and that the base of the tank is secured tightly. While you are at it, check if the threading on both the coil and tank is clean. If juice or dirt is lodged on the connectors, use a cotton swab or soft cloth to wipe them down with a little rubbing alcohol.
How do you use the Innokin Sceptre tube?
2:217:24Innokin Sceptre Tube Kit! - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust click it once it'll be see the blue and then. Green is basically your battery light indicator.MoreJust click it once it'll be see the blue and then. Green is basically your battery light indicator. So basically we got a charge of anywhere.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
Why is my Innokin Sceptre vape flashing green?
The green flashing like is an indicator that there is a shortage between the coil and battery.
What Are the Best Vape Pens on the Market?
Are you looking for a guide that explains how to use a vape pen because you’re currently using a simpler vaping device – such as a disposable vape – and you’re trying to decide whether you should upgrade to a full-fledged vape kit? If you haven’t selected your next vaping device yet, allow us to offer some help.
How to Charge a Vape Pen
A vape pen will always come with a USB charging cable. To charge the device, simply connect it to your computer and wait for the device’s indicator light to turn off or change color. When the light changes, the vape pen is fully charged.
How to Fill a Pod-Based Vape Pen
You might have noticed that three of the four vape pens we recommended above store their e-liquid in removable pods rather than traditional vape tanks. That’s the way the entire vaping industry is moving these days; pod-based vape pens are some of the most popular vaping devices on the market.
How to Fill a Tank-Based Vape Pen
If you have a device such as the Innokin Endura T18X, you have a tank-based vape pen. Like most modern vape tanks, the Endura T18X has a top-filling design that allows you to fill the tank without removing it from the device.
How to Use a Vape Pen
After filling your vape pen and waiting a few minutes to ensure that the wick is completely saturated with e-liquid, you’re ready to start vaping. If you have a button-activated vape pen, you may need to turn the device on. With most vape pens, you’ll do that by pressing the activation button five times quickly.
How to Replace the Coil in a Vape Pen
The atomizer coil in a vaping device is subjected to constant heat stress when you vape, and it has a finite life. Depending on how frequently you vape and what type of e-liquid you use, you can expect your vape pen’s atomizer coil to last anywhere from a few days to a few weeks before it requires replacement.
How to Fix Problems with Your Vape Pen
If your vape pen isn’t performing as you expect, we’ve got the help that you need. In this section of our guide on how to use a vape pen, we’ll cover some of the problems that you might experience as you learn how to use your new device.
How to replace coil on Innokin Adept?
To replace the coil, first unscrew the tank from the body of the Innokin Adept. Next, unscrew the ring from the base of the tank: If there is a coil preinstalled that you need to remove, you can do so by lifting the coil with the edge of your finger or pulling up on the coil itself:
What is an Innokin Adept?
The Innokin Adept allows you to adjust the airflow, creating either a more airy vape with an easier draw or a tighter vape that requires more draw to pull the air through.
How to prime a vape coil?
To prime the coil, turn it upside down and drip 3 to 4 drops of e-juice into the coil. This will wet down the wick and prevent a dry hit. After you install the coil following the steps below, fill the tank with vape juice and then set the unit aside for 5 minutes to give the coil a little extra time to soak.
How to fill a vape tank?
Filling the tank involves three quick motions: #1 First, remove the drip tip. The drip tip is designed to hold the tank closed to prevent children from accessing the vape juice and also to keep the tank from accidentally opening in your purse or pocket. Just pull up on the d rip tip and it will pop out.
What happens if a coil is dry?
If your coil material is dry, you will get what is known as a "dry hit.". You'll know you got a dry hit because it tastes nasty, like singed fabric or burning rubber. Once you singe your coil, there's no going back and you'll have to toss it. For this reason, it's important to always remember to prime the coil first!
How many clicks does an e-cigarette have?
Most e-cigs come with a 5-click on/off feature, however, the Innokin Adept did something that seems like a small change but is actually very smart design. The Innokin Adept only requires 3-clicks to activate or deactivate it.
Is VG vape juice higher than PG?
Because our natural and organic vape juices are manufactured using a 100% VG base, the viscosity is slightly higher than PG based vape juice. For this reason, giving the coil an extra 5 minute bath in the tank is a must to give the e-liquid time to fully soak into the coil.
About Brand
Highly committed towards promoting healthy lifestyle, Innokin has earned positive reputation in the community. The brand has been highly appreciated by smokers seeking a way to quit smoking. Innokin products pave the way toward smooth switch to vaping owing to their trouble free and user friendly vape gadgets.
Overview of the Product
Unlike any other Innokin model, Go S stands out because of its intriguing design and exquisite finish. It is more like pen shaped and claims to give you intense flavour like no other pod. It is a single button design that makes its functioning relatively easy. So, we found it to be extremely modern in looks and highly functional in performance.
Built and Design
If you are thinking that Innokin Go S has a same feel like any other Innokin model, then you are probably wrong. Go S feels luxurious in packaging and design as it has extremely modern design. The front of the mod has a square firing button surrounded by LED light. It comes in five vibrant colours to suit your style.
Performance
In terms of performance, Innokin has made sure that the Go S performs amazing with variety of e-liquids and nicotine salts. The 1.6Ω coil gives matchless flavour. Furthermore, the max output wattage of 13W is another treat for vapers who are a fan of Mouth to Lung vaping.
Ease of Use
Innokin Go S is extremely easy to use. To get the pod started, you have to press the firing button five times. Your battery level will also be indicated by the LED indicator around the firing button. Green means your battery is above 20% and red means its below 20%. Talking about the refilling, we found it mess free as well.
Battery and Charging
The Innokin Go S is driven by a powerful and long lasting battery of 1500 mAh that will last you an entire day. So, the 13W output wattage and 1500 mAh of battery is an ultimate delight giving you exceptional vaping experience throughout the day. The battery is also integrated with safety protection to save it from over charging.
Price
Innokin Go S retails at the price of $22.99 in the market. However, to save yourself some extra bucks you can also purchase it from a vape store that is offering discount.
How can I verify that my vaporizer is authentic?
Locate the Product Authentication number on the product packaging. Please visit https://www.innokin.com/verify-device and follow the instructions to verify your product authenticity.
The vaporizer is not producing flavour or clouds
Check that the coil is correctly inserted into the atomizer and that the atomizer is correctly attached. Ensure the attached atomizer is tightened to the 510 connector adequately. Check the female 510 connector for debris, e-liquid and condensation as well.
How do I use the power bank feature of the MVP5 vaporizer?
Simply plug a microUSB cable into the base of your MVP5 to charge your phone or other electronic devices! The screen of the MVP5 will show your amperage out, total capacity remaining of the MVP5 battery and amount of charge time remaining.
How do I use the flashlight feature of the MVP5 vaporizer?
Simply press the flashlight on/off button on the bottom of your vaporizer to activate the built-in flashlight. The flashlight will remember the last mode used when turned on and off. Select between 6 different modes and view the remaining run-time of your flashlight by viewing the MVP5 screen.
How do I calibrate the sensors suite of my MVP5 vaporizer?
Access the main menu of the MVP5 by pressing the middle mode button 3 times. Once there, navigate to the Sensor selection and press the fire button once. Gently move the MVP5 in a figure-eight pattern for 15 seconds to calibrate the sensors suite of the device.
What is Vape While Charging?
Vape While Charging is a feature commonly seen in our mods that allows you to vape while you are charging your device. Be advised that while this feature can be convenient, it’s not recommended to vape while charging a device that is extremely low on battery life.
What is USB-C Fast Charging? Can the MVP5 use USB-C Fast Charging?
Yes. The MVP5 is fully capable of 2Amp Fast Charging. Fast Charging is a feature seen in our premium devices which allow you to use a 2Amp wall charger and high quality USB-C cable to charge your device. 2A chargers charge devices much more quickly than standard 1A or .5A chargers.
What does MTL mean in vaping?
For those who aren’t sure what these terminologies mean, Mouth-to-lung (MTL) is essentially the same as how most people drag on a cigarette. You suck the vape into your mouth and then inhale into your throat or lungs. People that MTL aren’t focused on generating huge clouds of vapour.
Where is the fill hole on a sceptre pod?
Sceptre pods are easy to fill, located on the side of the pod is a rubber tab, pull out the lift side of the tab to uncover a fill hole, not too big as to allow for leaking when filling but not too small that the nibs of your e-liquid bottles don’t fit.
How to stop your tank from leaking?
Before Vaping Make sure orings, seal and glass are all in good condition and everything is tight. Make sure the coil is fully inserted and lined up correctly, notice cross-threading.
Why am I getting e-liquid in my mouth when I vape?
Please try to vape at an appropriately high wattage which is recommended on the coil during vaping. It may encounter the spitting issue if the liquid on the coil hasn't been atomized on time with low wattage.
Why does my coil or tank have a burnt taste?
If your coil start to have burnt taste within short using time. It may be caused by the following：
Why am I not getting any vapour?
Check that your settings are optimum for the coil installed and ensure it hasn’t reached the end of its natural life. If it has, replace it. Make sure your battery is fully charged and take a slow steady draw.
MVP5 connetor become loose
This issue can be fixed on your own with a proper set of screwdrivers.
Proton connetor become loose
This issue can be fixed on your own with a proper set of screwdrivers.
My Coolfire Z50 stopped working. The screen is stuck. What should I do?
This issue can be fixed by allowing the Z50 to run entirely out of battery, turning the manual switch to "off", then throwing it on a charger until it's reached full charge. Switch the manual switch back to "on", click the firing button 3x to fully turn the device on and see if the issue persists.
About Brand
Overview of The Product
- Unlike any other Innokin model, Go S stands out because of its intriguing design and exquisite finish. It is more like pen shaped and claims to give you intense flavour like no other pod. It is a single button design that makes its functioning relatively easy. So, we found it to be extremely modern in looks and highly functional in performance. Some of the general specifications of Inn…
Built and Design
- If you are thinking that Innokin Go S has a same feel like any other Innokin model, then you are probably wrong. Go S feels luxurious in packaging and design as it has extremely modern design. The front of the mod has a square firing button surrounded by LED light. It comes in five vibrant colours to suit your style. It also comes in pink for all the ladies vape lovers. Owing to stainless s…
Performance
- In terms of performance, Innokin has made sure that the Go S performs amazing with variety of e-liquids and nicotine salts. The 1.6Ω coil gives matchless flavour. Furthermore, the max output wattage of 13W is another treat for vapers who are a fan of Mouth to Lung vaping. We were able to get concentrated, flavourful and sensational puff with Innokin Go S. In addition, it offers full a…
Ease of Use
- Innokin Go S is extremely easy to use. To get the pod started, you have to press the firing button five times. Your battery level will also be indicated by the LED indicator around the firing button. Green means your battery is above 20% and red means its below 20%. Talking about the refilling, we found it mess free as well. You can slide the top o...
Battery and Charging
- The Innokin Go S is driven by a powerful and long lasting battery of 1500 mAh that will last you an entire day. So, the 13W output wattage and 1500 mAh of battery is an ultimate delight giving you exceptional vaping experience throughout the day. The battery is also integrated with safety protection to save it from over charging. It takes like an hour to fully charge. On the back side of …
Price
- Innokin Go S retails at the price of $22.99 in the market. However, to save yourself some extra bucks you can also purchase it from a vape store that is offering discount. Pros and Cons Associated with Innokin Go S Let’s check out the pros and cons of Innokin Go S in detail. Still keep in mind that the pros of the device outweigh cons significantly, so Innokin Go S is a reliable optio…
Pros
- It is easy to use starter kit with fairly simple operation which makes it ideal for beginners and novice vapers. Just press the firing button five times, and you are all set to start vaping.
- Refilling Innokin Go S is hassle free. We are very pleased with how easy it is to replenish the pod with favourite e-liquids.
- The device is sufficiently portable. It has sleek pen shaped modern design that is light weigh…
- It is easy to use starter kit with fairly simple operation which makes it ideal for beginners and novice vapers. Just press the firing button five times, and you are all set to start vaping.
- Refilling Innokin Go S is hassle free. We are very pleased with how easy it is to replenish the pod with favourite e-liquids.
- The device is sufficiently portable. It has sleek pen shaped modern design that is light weight and pleasing to the eyes.
- The coil is made from organic cotton and wood-pulp to make your puffs more flavourful.
Cons
- Disposables tanks is not everyone’s cup of tea. So, its highly despised by people who don’t adore disposable tanks.
- Another disadvantage is it doesn’t have Type C USB port.
A Guide to Using Innokin Go S
- As mentioned previously, the operation of Innokin Go S is extremely easy. Let’s dig into the detail of how to use this pod. You can also read the manual for detailed instructions. 1. Take out the accessories and the device from the packaging. 2. Attach the pod with the tank and fill it with your desired e-liquid. 3. Then charge it fully by utilizing the USB cable. 4. After it is fully charged, pres…