How to Use the Vape Mod Aspire PockeX With the PockeX’ battery charged and its tank filled, the device is ready to use. To unlock the device and turn it on, simply press the fire button five times in succession (same goes with turning it off).
How do you use the Aspire pockex vape mod?
How to Use the Vape Mod Aspire PockeX With the PockeX’ battery charged and its tank filled, the device is ready to use. To unlock the device and turn it on, simply press the fire button five times in succession (same goes with turning it off). The indicator light will then flash three times, indicating that it is ready for vaping.
How do I use the Aspire pockex fire button?
The Aspire PockeX uses the tried and tested single button operation and is super easy to use. You can do 2 things with the fire button: Fire it and turn it on/off. There’s not a lot to get wrong! There is a 10 second auto cut off which stops the battery from firing for more than 10 seconds at a time.
What makes the Aspire pockex so special?
It features an innovative top coil swap system which makes filling a doddle and a 1500mAh internal battery combined with the included 0.6Ω coils means that the PockeX can produce lots of flavour and vapour. In this post, you’ll find out how to set up, use and maintain the Aspire PockeX, as well as what we like and don’t like about it.
How do I Fill my aspire pockex with e-liquid?
Aspire PockeX Top-Fill Tank 1 Unscrew and remove the top cap 2 Squirt your favorite E-Liquid into the tank ( Do not exceed the Max line when filling) 3 Screw the top cap to the PockeX tank
How do you set up a PockeX?
The PockeX has a 2ml capacity....If the glass on your PockeX cracks or breaks, you can buy and easily install a new replacement glass tube.Make sure your tank is empty.Turn the PockeX off.Unscrew the top cap.Pull the old glass out of the tank.Push the new glass in.Replace the top cap.
Why is my Aspire PockeX flashing blue?
While the device is on, the LED light will indicate the PockeX's charge level, when the battery charge is above 30%, the light will be blue; When the battery charge is less than 30%, the LED light around the fire button will be pink.
How do I turn my Aspire vape on?
1:071:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd ready for use to turn on the aspire pockets press the fire button five times in under threeMoreAnd ready for use to turn on the aspire pockets press the fire button five times in under three seconds. Button will flash to indicate it is now on repeat.
Can you use Aspire PockeX while charging?
You can vape with the Aspire PockeX while charging it.
How do I know if my Aspire PockeX is charging?
Using the included cable, charge via a USB port. The light at the bottom will turn red to indicate it's charging and will turn green once it's fully charged.
How do I get my vape to work again?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Why will my vape not turn on?
It has run out of battery Even if you think it is fully charged, this might not be the case and, simply put, if your vape device is out of battery, it won't turn on. So, the first thing you should do is try charging your electronic cigarette again and see if this makes a difference.
How long does the Aspire PockeX take to charge?
4 hoursHow long does the Aspire PockeX AIO battery take to charge? If you are charging it for the maiden time, it will take 4 hours to get the 1500mAh battery up to full charge.
How long should a PockeX coil last?
Coils generally last between 1 to 4 weeks but could be extended if the coil is broke in properly and when good care and maintenance procedures are practiced. One thing to monitor is when the coil heats up and there is a noticeable burnt taste to the vapor that the PockeX produces when it is used.
How long does a PockeX battery last?
about two hoursThe Aspire PockeX has a 1,500 mAh internal battery. The relatively low battery capacity of this device compared to other sub-ohm vape pens helps to keep the PockeX small and sleek. However, it also means that you should expect no more than about two hours of constant vaping on a full battery charge.
Is PockeX mouth to lung?
The Aspire PockeX vape pen is designed for mouth-to-lung inhaling, providing you the intense flavor and dense vapor.
How much does an Aspire Pockex weigh?
The device is simple to use and will win the hearts of people after a ruthless mod. With its small size, it comes at 86 grams, and it is very pleasant to handle and use. Its build is excellent and does not come off as stressful to use.
How to turn on a vape?
To turn on the device, press the fire button five times consecutively and repeat this process if you want to turn it off . The indicator light flashes three times to show you that it is the moment to vape.
What is the coil on an Aspire?
The Aspire PockeX coils create a good combination of stainless steel wires and organic cotton. The U-tech coils have a good way of diverting airflow to allow for the recycling of the drawn air twice through the coil for an unparalleled flavor and huge clouds of vapor. You have the option of choosing between two coils. Either the 0.6ohm coil for more vapor or the 1.2ohm coil for more flavor.
What is an Aspire pen?
The Aspire PockeX is an all-in-one vape pen from the Aspire vape company. This pen is from the Aspire series, where we have other pens like the Aspire K lite and the Aspire K2. Since Aspire is a pioneer in building AIO products, they did a good job with PockeX. The pen is compact, sturdy, and ergonomic.
How long to let a vape settle down?
Use the max line to guide you on how much you need to vape to avoid chances of leakages and spitting issues. After putting your liquid, you will need to let your device settle down for 10 minutes to give a good hit, flavor, and vapor.
How many mAh does the Aspire Pockex have?
The Aspire PockeX comes with a 1500mAh battery that has a bypass output. You are allowed a 30-day warranty on the battery from the day of purchase. The battery level indicator is found on the button and it can change its color concerning how much battery percentage you have left.
How long does it take for a vape to charge?
To charge the unit, plug in the micro USB charger at the port located at the bottom. Within an hour and a half hours, your vape will be ready to go.
How long does the fire button on a Pockex vape pen last?
Two things could be done with the fire button — firing and locking the vape pen. The PockeX features pass-through mode and a 10-second automatic cutoff time which basically stops it from firing for more than 10 seconds at a time.
How much does a Pockex vape weigh?
With its small size and weight of only 86 grams, handling it is pleasant.
What coils are in a vape kit?
Two different coils come in the basic kit — a 0.6ohm one and a 1.2ohm one. The 0.6ohm coil (stainless steel) is for sub-ohm vaping and produces what one needs while not eating up the device’s battery life.
How big is the Aspire Pockex?
The Aspire PockeX is a compact all-in-one vape pen that measures only 11.77cm by 1.97cm — allowing for great portability as it could be stored into literally any pocket, enclosure, or bag. The vape is one of the shortest tube mod in the market that offers dense vapor production and superb flavor.
What is included in the atomizer kit?
The kit comes with the device itself with a 0.6ohm atomizer pre-installed, a replacement 1.2ohm atomizer, a micro-USB cable for charging, a user manual, and a warranty card.
What voltage is a Pockex mod?
The PockeX vape mod also has a non-variable voltage of 4.2 volts and non-adjustable temperature, making it convenient starter kit for beginners. It supports pass-through vaping and the micro USB for charging is located at the bottom. It produces a remarkable taste profile while also providing a strong throat hit.
Where is the airflow hole on a vape?
The device has a non-adjustable airflow which helps on making it super compact. The airflow holes are located under the top cap and the airflow is nice and is suitable for DTL vaping or lose MTL vaping.
What is the new Aspire Pockex box?
This introduces new features such as USB-C charging, adjustable airflow and top filling via a sliding top cap. See what we thought and how it compares to the original in our PockeX Box review.
How to turn off a PockeX?
To turn the PockeX on and off, quickly press the fire button 5 times. The light around the fire button will flash 3 times to indicate when the device is on .
What coils are used for VG PG?
For high VG e-liquids (VG:PG 60:40 and above) it’s best to use the included 0.6Ω PockeX coil. For VG:PG 50:50 e-liquids and nicotine salts, the 0.6Ω can still be used as well as the 1.2Ω PockeX coil and the entire Nautilus X and Nautilus XS ranges.
What resistances does the Pockex coil come with?
The PockeX device is usually paired with PockeX coils, which come in a choice of 0.6Ω and 1.2Ω resistances. However, what Aspire haven’t mentioned in their marketing material is that the Pockex is also compatible with Aspire Nautilus X and Nautilus XS coils – adding more resistance options for Mouth-to-Lung vaping.
How many ml is a Pockex?
The PockeX has a 2ml capacity. When filling, make sure not to overfill the tank. There is a line next to the e-liquid viewing window with small letters saying Max – only fill e-liquid up to this line to make sure your tank doesn’t leak.
How long does it take for a wick to soak up e-liquid?
Screw a new coil into the tank. Refit the top cap. Wait for 5-10 minutes for the wick to soak up e-liquid. After you’ve changed the coil, do not over tighten the top cap. If the top cap is too tight, when you remove it to refill the tank, the coil can unscrew as well.
How big is the Aspire Pockex?
The Aspire PockeX is a compact device. Measuring just 117 x 19.7mm, it’s shorter than most smartphones and fits neatly into most pockets.
What is the Aspire Pockex?
Being just a bit shorter than the iPhone 5s, the Aspire PockeX is the ultimate pocket All-in-One (AIO) device. Packed with a 0.6Ω stainless steel Nautilus X U-Tech coil, the PockeX is a sub-ohm device. The PockeX has a wider drip-tip and larger top-airflow allowing for increased vapor production.
What is the battery capacity of a Pockex?
Battery Capacity:1500mah / Bypass Output#N#Compact 11.77cm*1.97cm dimensions allow you to slide the PockeX into literally any pocket, bag or enclosure. The PockeX is one of the shortest tube shaped pocket AIO’s offering superb flavor and dense vapor production.
How long does it take to wick a Pockex?
This should take around 2-3 minutes according to E-Liquid thickness.
What is a Pockex?
The PockeX has a wider drip-tip and larger top-airflow allowing for increased vapor production. PockeX’s discrete size and low-profile sub-ohm vapor production makes the PockeX your must-have vape while indoors or on-the-go.
How to charge a Pockex?
PockeX Charging instructions ● Charge via USB port. Maximum charge current can reach up to 800mA. ● Connect your PockeX to the charger. The light at the bottom will turn red to indicate the PockeX is charging. When the PockeX is fully charged the light will turn green.
What does the red light on a Pockex mean?
The light at the bottom will turn red to indicate the PockeX is charging. When the PockeX is fully charged the light will turn green. Click to expand... Yeah there’s a coil and juice in it and it’s turned on, but even when I hold the fire button down usually you’d hear like crackling or whatever, but with this there’s nothing.
When will Aspire vapes be released?
July 17, 2020. September 8, 2020. Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
Why is my Aspire vape leaking?
This one we can answer with a simple video from our Geek Vape Team at Vape and Juice TV.
Why is my Aspire Breeze vape gurgling?
The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
Why is my vape spitting?
Your vape spitting liquid out of the chimney through the mouthpiece is usually a sign that you have flooded the coils.
Why is there no atomiser on my vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank. If the connection isn’t quite right it will read no atomiser found.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
What to do if your e-liquid is still gurgling?
Still gurgling? Take it apart and give it a good clean up. You also need to make sure you are using the correct PG/VG ratio e-liquid for your device. If you have a sub-ohm device you should be using high VG.
