To vape with the Voopoo Argus, hold the fire button while puffing. If you wish, you can also set the device to activate automatically when you puff. To do that, press the fire button three times quickly to open the menu.
How do I vape with the voopoo Argus?
Apr 09, 2018 · Connect it to the pc, and run the drag software, if the software connects and recognises it its working, so what ya need to do is download the firmware file and reflash it through the software, disconnect, pull batteries, put them bk in, should fire up.
Is voopoo a good vape brand?
Mar 04, 2019 · 1. Prime the coil with low wattage for the first several puffs. 2. Fill the e-juice over the minimum line of the tanks. 3. While vaping, please make sure the power of the mod is within the powe range that the coil can support. 4. After first filling, please stands for 5mins to get the organic cotton completely saturated before vaping.
How do I charge my voopoo?
I bought this device about 3 weeks ago, and suddenly it won't turn on, idk why, 15 minutes before I used it and its fine, it works normally. So if anyone have a suggestion or solution, I'll apreciated it.
How do I unlock my voopoo Vinci pod system?
VOOPOO VINCI pod system kits are shipped in a locked position. In order to unlock your device, simply click the ‘power button’ three times quickly. This will unlock your VOOPOO VINCI. The other possible problem is that it is not charged. Simply plug the unit into a …
How do you turn on Voopoo gene?
- The Drag S is the brand new, state of the art pod vape kit from the esteemed Voopoo. ...
- Press the fire button 5 times rapidly to power the Drag S On or Off. ...
- - Turn On/ Off = Press fire button 5 times.
How do you turn a Voopoo vape on?
How do you use the Voopoo gene vape?
- Five clicks of the power button turn the device on and off.
- Three clicks of the power button scroll between the three firing modes (P for manual, AUTO for draw-activated and P&A for both).
- Press + or – to adjust the wattage.
- Pressing + and – together enters the PUFF interface.
Why is my Voopoo gene not working?
How do you unlock the Voopoo Argus gene?
How do you switch on Voopoo drag?
Powering on & off: Tap the fire button 5 times. Changing modes: Tap the fire button three times to change from 'RBA' to 'smart' modes.Jul 29, 2020
How do you charge a Voopoo gene?
How do you turn on a vape without the button?
Do you press a button to vape?
How do you reset a Voopoo?
How do you reset a drag mod?
Why is my Voopoo Argus not working?
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
How to fill a pod with liquid?
How To Fill The Pod With E-Liquid: Remove the pod from the device. Next, pull out the silica gel plug on the bottom of the pod. Proceed by filling the fill slot with e-liquid. It is recommended to keep the pod two-thirds full. Push the silica gel plug back into the slot, then reinsert the pod back into the device.
How to install 18650 battery?
How To Install The Battery: Unscrew the bottom battery cover, install the 18650 battery from the bottom of the device, then screw in the bottom battery cover. How To Adjust The Wattage: When the device is turned on, press the up “+” or down “-” adjustment buttons to increase or decrease the wattage.
How big is the Vinci X?
It’s constructed of zinc alloy, while the pod is made up of a PCTG material. It measures just 117mm by 29.5mm by 25.3mm, meaning it’s very compact and very portable. The device is available in several color options and boasts amazing appeal, especially with a 0.96″ TFT color screen display. On this display, you can adjust wattage, see the current battery level, and there is even a Puff Mode that will track your vaping habits. This is all possible due to the GENE.AI chipset, which is a high-performance chip capable of delivering incredible features.
Can Not Recognize The Atomizers
the issue is the mod keeps asking ” New Coil (+)” or ” Old Coil (-)”, the vaping mod cannot detect the atomizer due to the short circuit of your tank or mod.
Coil Burnt Issue
If the coil burnt out within a short time, follows might be the causes to the issue: 1. Did not prime the coil before vaping. 2. The e-juice you fill is not enough. 3. Improper vaping settings of power. 4.you vape too frequently.
Is the Vinci a good vape?
The Vinci is a cube shaped device with rounded edges. It’s a good looking device but it just feels bulky. It’s bigger and thicker than most other pod vapes and it has a fair bit of weight to it too. The boxy shape also feels weird but it isn’t uncomfortable to hold.
How does the Vinci pod work?
It’s lightly tinted so it’s easy to see how much ejuice is in it. The pod attaches to the battery magnetically and is firmly held in place by four magnets, one on each corner of the pod. There’s no wiggle at all when the pod is seated in the battery.
Spain: Vape Industry Sues Government Over Anti-Vaping Campaign
" Last November, Spain’s Health Ministry launched an anti-vaping campaign which ignores all the scientific evidence in favour of vaping for smoking cessation and/or tobacco harm reduction. Moreover, the campaign makes a number of false claims such as blaming vaping for the EVALI outbreak and saying that vapour is carcinogenic.
Can we add a new rule?
I know people don't really pay attention to the side bar, rules, or stickies in general but can we add a rule for those that do? Something along the lines of:
Thank you mods!
I just wanted to publicly thank the mods for implementing our new no medical questions rule that I suggested a few days ago. Hopefully it cuts down on some of the clutter, questions we're not qualified to answer, and just dumb shit that's in no way related to vaping being blamed on vaping.
Why does my vape taste burnt?
If you find your vape tasting burnt, its possible you are using an e-liquid with a very high VG level and that is too thick to saturate the wicks in the coils, leading to burning. Try using e-liquid that has a lower VG level (and higher PG level) to improve the flow of your e-liquid.
Can you fill a pod with e-liquid?
A) Not enough e-liquid in pod: Check and make sure that the pod is filled with e-liquid. Its a good idea to re-fill your pod before it becomes completely empty, as the last small amounts of e-liquid will have a difficult time getting to the coil to saturate the wicks.