How to turn on SubVod vape? To turn ON / OFF the battery press the power button 5 times within 2 seconds. To vape press the fire button, draw and release when you have finished.
Can I use my subvod while it is being charged?
This exceptional feature permits you to use your SUBVOD while it is being charged. This way, you will never be left without a functioning vaporizer to use. You can purchase a USB car adapter so that you can vape and charge while you’re in the car. This is a fantastic ability, particularly while on long drives and road trips.
How to turn on/off a vape pen?
This heat up the liquid in the cartridge and transforms it into vapor. The vapor passes through the device and into the mouth of the user who releases it by exhaling. How to turn on/off a vape pen? 1. Press the button rapidly 5 times 2. Notice the light on the button flashing 3.
What is the difference between the subvod and the evod?
But unlike the EVOD, the SUBVOD allows you to use sub-ohm tanks and take advantage of the vapor and flavor benefits of sub-ohm coils. Battery features Short circuit protection, Low resistance protection, Overcharge protection.
How do I turn the battery on/off on my vape?
Press the button rapidly 5 times 2. Notice the light on the button flashing 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off. If playback doesn't begin shortly, try restarting your device.
How long does a Subvod take to charge?
about 2 – 3 hrsCharging the battery The red light indicates that there is not full charge in the battery and will normally take about 2 – 3 hrs for a full charge. When the battery is fully charged the LED light will turn to green. Do not leave battery unattended or leave to charge overnight. This battery can be vaped when on charge.
What is Subvod vape?
About SUBVOD kit But unlike the EVOD, the SUBVOD allows you to use sub-ohm tanks and take advantage of the vapor and flavor benefits of sub-ohm coils. Battery features Short circuit protection, Low resistance protection, Overcharge protection. Tank features TOP-FILLING Design and Direct-lung inhale from 15W to 60W.
How do you fill a Subvod vape?
4:3711:59Kangertech Subvod Kit & Juice Box Eliquid Review And GiveawayYouTubeStart of suggested clipEnd of suggested clipYou got air flow down here on the bottom that you can close as much as you want or open as much asMoreYou got air flow down here on the bottom that you can close as much as you want or open as much as you want there's one on each side Cyclops. Hole that's the bottom of the base right there.
How do you fill a Kangertech tank?
0:060:51How To Fill A Kangertech EVOD - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank.MoreThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank. And fill down the side. Making sure not to get any liquid down the center hole.
How many watts is a Kangertech Subvod?
The wattage can be adjusted across a spectrum ranging from 35 watts to 40 watts and it has an absolute minimum resistance of just 0.1 ohm. Between all of the variables that you can adjust, this versatile vaping instrument is more than capable of producing the vapor that you're after – be it thick or thin.
How do you change the coil on a Kangertech Subvod?
1:033:49Kangertech Subvod Kit Overview - Glass and Coil Replacement!YouTubeStart of suggested clipEnd of suggested clipIt comes off just like that this is gonna be your coil unscrew your coil if it's bad throw it out toMoreIt comes off just like that this is gonna be your coil unscrew your coil if it's bad throw it out to put your new one in just put it in to write it in I always recommend taking a few drops of liquid.
How do you fill a Kangertech Nano?
0:000:56How To Fill The Kanger TopTank Nano - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then down those slots on the side and just in the directions house make sure to not go up on topMoreAnd then down those slots on the side and just in the directions house make sure to not go up on top up above that middle tube which is almost all the way to the. Top. Like that put the top back on.
How do I use Kangertech?
To turn ON / OFF press the fire button 5 time in 2 seconds. Squeeze the plastic bottle (Squonking) to get your desired amount of liquid into the tank, press the fire button and vape. If the button is pressed for more than 10 seconds the unit will automatically shut down. Release the button and fire again to reactivate.
How do you charge a Kangertech EVOD?
The Kanger Evod battery can be charged by removing the attached clearomiser/atomiser, which then exposes the thread on the end of the battery. Connect the battery to the charger by bringing the threads together and turning in a clockwise direction.
How do you fill a mini vape?
How to refill a vape podRemove the pod from the vape battery.Find the rubber bung that covers the fill port.Lift up this rubber bung to show the filling hole.Place the nozzle of your e-liquid bottle into the hole.Tilt the vape pod at a slight angle to prevent air pockets.Slowly fill the pod with e-liquid.More items...
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
Is it worth buying?
If you’re looking for a vape mod that is easy to use, affordable, and performs great, trust me; you will hit a homerun with Kanger’s SubVod Kit.
SubVod Packaging
The kit comes in a stylish cardboard box that opens on the side. There is a nice little cut-out on the front that showcases both the battery and the vape tank as soon as you unwrap your package. Everything is nestled inside Styrofoam cutouts so there is a very minimal chance for the equipment to get damaged during transport.
Design and Aesthetics
As I’ve mentioned earlier, this kit is an elegant starting point for new vapers who are just getting used to the idea of vaping.
KangerTech Toptank Nano
Kanger really did a great job on this sub-ohm capable tank – to a point where it can actually compete with a lot of expensive tanks on the market that are targeted towards experienced vapers who know what they are looking for.
KangerTech SubVod Battery
SubVod battery is as simple as they get! Screw the tank on, press five times to turn on, and vape on! No settings to fiddle with and fear that you’ll use the wrong coil with the wrong setting – at least when you’re using the supplied Toptank Nano.
Disassembly and Cleaning
SubVod battery and Toptank Nano are going to require a good scrub every once in awhile. The battery is easy: wipe it down with a damp cloth and then remove excess damp with a dry cloth and that is it. Toptank Nano won’t be that easy. Every tank needs to be cleaned regularly, especially if you’re trying out different flavors every day.
Performance and Vaping Experience
I have to admit, as much as I was impressed with this setup design-wise, I didn’t expect much from it when it comes to performance. I’m glad to say I was completely wrong.
New Sub Ohm Starter Kit – The Kangertech Subvod
Kanger have released their second starter kit (first was the Evod) in the style of a simple fixed voltage ego styled battery and the new version of the Kanger Subtank Nano, with the option to purchase the kit featuring a top or bottom filling Subtank Nano, and the option of either 1.9ml or 3.2ml capacity.
Subvod Style and Build Quality
The Subvod kit actually comprises two parts- the new Kangertech Subtank Nano-S and the Kangertech Subvod battery.
How Does The Kanger Subvod Perform?
It’s absolutely superior to your usual starter kit in every single way. The SSOCC 0.5ohm coil gives off some outstanding flavour and vapour production, which gives a great tasting flavour experience and also you can produce some big clouds with the Subvod Kit.
About SUBVOD kit
The Kanger SUBVOD Starter Kit, comes with 1300mah capacity kanger subvod battery and 3.2ml capacity kanger toptank nano, looks and works like the original EVOD – just charge the battery, attach the clearomizer, and vape away.
Features of SUBVOD Kit
1. Large Capacity 1300mAh Battery 2. 3.2ml Tank Capacity 3. With Simple One Button Design 4. With TOP-FILLING Design 5. Support Short Circuit Protection, 10 Second Cut off Feature, Low Resistance Protection, Overcharge Protection, Low-Battery Warning Indicator. 6. Support 510 threaded. 7. Have LED charging indicator. 8.
How To Charge SUBVOD Kit
Charging :You can charging it by Micro USB. When you connect the charge port at the bottom of the battery to a power source, the indicator light will glow red while the SUBVOD is charging and turn to green when the battery is back to full power. Note: the Kanger SUBVOD has passthrough functionality so you can continue vaping as it charges.
