After two seconds, hold the button to start heating.To adjust the temp, just press the button for two seconds. Once your session is done, press the button three times to turn off the X-MAX V2 Pro. The vaporizer also has an automatic shut off feature.
How to turn on a vape pen?
HOW TO TURN ON A VAPE PEN . To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge.
What is the X-MAX V2 Pro vaporizer?
The X-MAX V2 Pro Vaporizer is a dual-use portable vape that features a ceramic heating chamber that delivers flavorful, dense vapor clouds from your materials. This portable vaporizer is powered by a rechargeable and swappable 18650 li-ion battery that can last 45-60 minutes on a full charge.
What is the battery life of the X-MAX V2 Pro?
This portable vaporizer is powered by a rechargeable and swappable 18650 li-ion battery that can last 45-60 minutes on a full charge. The X-MAX V2 Pro has a low draw resistance for comfortable sessions.
What to do when your disposable vape device doesn’t work?
Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from the disposable vape that you have – these tips may help. Block the Airflow Vent
How do I turn off xmax V2 Pro?
Turn it off by pressing the button 3 times. Your X-Max V2 Pro will shut off automatically after 5 minutes for safety. Simply turn it back on by pressing the button 3 times to continue your session.
How do I use Xmax?
0:422:31X MAX II Pro Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipDevice. The first is the removable battery. This can really extend the life of the unit. You canMoreDevice. The first is the removable battery. This can really extend the life of the unit. You can also carry backup batteries to keep your ex maxpro charged while you're on the go.
How do you use the V2 Pro vaporizer?
0:163:51V2 Pro Series 3 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo unlock the series 3 just press the activation button three times and the units LEDs will blinkMoreTo unlock the series 3 just press the activation button three times and the units LEDs will blink white. Next just press and hold the button when you're ready to start vaping.
How do I charge my xmax V3 Pro?
Charging your XMax V3 Pro To charge the device, insert the USB cable provided into the micro USB port on the bottom of the device. An initial charge will take approximately 1.5 hours. It is not recommended to use the device while it is charging to avoid damage to the battery.
How do I turn on xmax V3 Pro?
To turn on the XMAX v3 Pro vaporizer, you're going to press the power button three times. The vaporizer will use your default or last temp settings when powering up. Select your session mode, wait for it to get to temp, or press the power button and wait for the three vibrations.
How do I clean my Xmax?
For deep clean, immerse all pieces except plastic mouthpiece in isopropyl alcohol for 10-20 minutes, rinse thoroughly with clean water and dry before reassembling. Stainless steel oven cleaning: use brush to sweep inside and cotton swab dipped in isopropyl alcohol.
How do I turn on V2 Pro Series 7?
0:055:06V2 Pro Series 7 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing you want to do with this unit is sterilize it to do that press the activation buttonMoreThe first thing you want to do with this unit is sterilize it to do that press the activation button quickly three times to unlock the unit.
How do I clean my max 2 Pro vape?
Clean up. When you're done vaping, make sure to clean out the oven right away to prevent any buildup of leftover herbs. Dump out the contents of the oven, then brush out the inside, as well as the underside of the screen. This should keep your V2 Pro much cleaner.
What is a V2 Pro?
The V2 Pro Series 7 is a portable conduction vaporizer made by v2 cigs. They also make the V2 Pro Series 3 which is a smaller pen version of the S7. The V2 Pro S7 is a jack of all trades but master of none offering the ability to vape dry herbs and concentrates.
How do I use Xmax v3?
How to use the XMAX V3 ProMake sure your battery is fully charged before using.Remove the magnetic mouthpiece and load the chamber with up to 0.15 grams of flower.Don't pack your bud in too tightly or it will restrict the airflow.Press the power button three times to turn the device on.More items...•
How do you use Utillian 722?
To use the Utillian 722:Load with dry herb or wax (using the included insert). Keep the herb fluffy and do not pack too tight. ... Tap the button 5 times to turn on and the vape will start heating up. The LED will start blinking.2 Taps on the button will toggle temps.Once the LED is solid, the vape is ready to use.
How to turn on Starry Vape?
To turn on the Starry, hold the power button for three seconds.The two smaller buttons adjust the temperature up and down, and it will immediately start heating up to the last temperature. The coffee cup icon will blink while it heats up, and turns solid when it’s time to vape.
How to make a vaporizer with a mouthpiece?
Put the lid back on, and swivel the mouthpiece out. For your first session, start with the heat set to 390° F, and take a light, slow draw, like sipping hot tea. You shouldn’t need to stir, but you may be able to get a little bit more vapor with a stir near the end.
Charge it
Your XMAX V3 Pro will arrive with less than a full charge so let’s top it off before we roll into our first session. Plug it in with the included USB-C charge cable and wait until the battery indicator is full.
Three-button controls
The V3 Pro comes with a single power button and two face buttons for precise temperature control. Everything from current and set temperature, battery level, session timer and more is conveniently displayed on a bright OLED screen.
Burn it off
Once your V3 Pro vaporizer is fully charged, we’ll run a quick burnoff to clear the oven of any remaining manufacturing residues. Triple click the top power button to turn it on and make sure it’s set to session. It’ll say either session or on-demand, right below the battery meter.
Grind and pack
The V3 Pro ’s convection oven thrives with a medium to coarse grind. Stay away from finer grinds. Most grinders shred at a medium consistency so whatever you have should be fine. Take your herbs, ground them up, and fill up the oven. Pack here is important. Pack it too tightly and you’ll get an uneven cook.
Set the temperature - session mode
For this first session, we’ll take advantage of the V3 Pro’s full convection heating with low temp, flavorful hits on session mode. Turn your V3 Pro back on and set the temperature to 390° F (199° C). Once it vibrates, it’s time to hit it!
Hit it!
Take a slow, relaxing draw of about five to ten seconds. Your first few hits will be wispy and flavorful, but will increase in vapor production as you roll through your session. Jump right back in and take slower draws for the best results.
Try on-demand mode
The XMAX V3 Pro also comes with an On-Demand Mode that only heats up when you tell it to. The screen will display either “session” or “on demand” to indicate its current setting. Press both temperature buttons at the same time to cycle between the modes, and set it to on-demand.
ABOUT THE X-MAX V2 PRO VAPORIZER
The X-MAX V2 Pro Vaporizer is a dual-use portable vape that features a ceramic heating chamber that delivers flavorful, dense vapor clouds from your materials. This portable vaporizer is powered by a rechargeable and swappable 18650 li-ion battery that can last 45-60 minutes on a full charge.
HOW TO USE THE X-MAX V2 PRO
Using the X-MAX is simple. It has one button so you can toggle between the five temperature settings (356ºF - 428ºF). To prevent activation during transit, the battery connection has a silicone cover. To start:
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
Can you leave a battery in overnight?
Once the light comes on, it is charging. Avoid letting your battery charge overnight. While it is easy to leave it in overnight, it will reduce the lifespan of your battery over time. Your battery will typically indicate when it is done by a change in the light on your device.
Do vapes need a charger?
Most vapes will either use a Micro USB charger, or come with a vape pen charger. VPM carries Vape Pen Chargers if you ever misplace yours, or if you just like to have extras around. Batteries will generally light up once they are plugged in indicate they are charging.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
Can you burn a wick on an e-cigarette?
Most disposable e-cigarettes lack any kind of temperature control functionality. If you maintain such a fast vaping pace that you’re continually vaping before the wick has a chance to absorb more e-liquid, you may burn the wick. Slow down.
