Now all you need to to is turn it on and you're ready to go! Simply press the battery button five times in quick succession. The lights on the button and the battery tip will flash 3 times to show it’s switched on.
Full Answer
How do I use the vapour vape?
Simply press the battery button five times in quick succession. The lights on the button and the battery tip will flash 3 times to show it’s switched on. Put the mouth-end in your mouth, press the battery button and inhale the vapour like you would inhale on a cigarette.
Do Blu® e-cigarettes contain nicotine?
WARNING: This product contains nicotine. Nicotine is an addictive chemical. How are blu® e-cigarettes different from traditional cigarettes? Do blu® e-cigarettes produce smoke? Are blu® Rechargeable Devices compatible with other electronic cigarette brands? How should I store my blu® electronic cigarette? What's in an electronic cigarette?
Why does my blu PRO e-cigarette taste burnt?
If your Blu Pro e-cigarette is producing a burnt taste, this almost always means the wicking material inside the coil head has burnt due to lack of e-liquid.
Can I use any e-liquid on my Blu device?
Some vaping pens allow you to use any e-liquid on the market, but are also not the highest quality and often don't stand the test of time because low quality e-liquids can damage the device. blu devices come with a range of different flavours for whichever e-cigarette you choose.
How do you turn on blue vape?
0:581:29Tutorial - How to Get Started with your blu PRO® E-Cigarette - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn on the blue probe by pressing the buttons five times. The button will flash three times to letMoreTurn on the blue probe by pressing the buttons five times. The button will flash three times to let you know the device is on you're all set the EC can be turned off the same way. Before.
How do I get my vape to turn on?
If your e-cigarette does have a fire button, it can be turned on by pressing the button five times quickly in succession. For most e-cigarettes, you'll need to press the fire button 5 times in 2 seconds - this is to prevent your device going off unexpectedly in your bag or pocket!
How do I use my blu vape?
0:593:19blu | myblu Starter Kit Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipAt the bottom of the my blue is a battery indicator light and a charging port where the micro USB isMoreAt the bottom of the my blue is a battery indicator light and a charging port where the micro USB is plugged in for charging. To get started open a liquid pod.
Why is my blu vape not working?
Myblu isn't producing any vapour This can be caused by several things: the pod may not be fully inserted, there could be some liquid or residue between the pod or the battery connection/metal conductors on the pod may have been pushed down too far.
Why will my vape not turn on?
It has run out of battery Even if you think it is fully charged, this might not be the case and, simply put, if your vape device is out of battery, it won't turn on. So, the first thing you should do is try charging your electronic cigarette again and see if this makes a difference.
Why will my vape charge but not turn on?
There could be something blocking the connection between the battery and the clearomiser. Try cleaning the battery terminal and end of your clearomiser with a cotton bud. Another thing to check is that the tank or clearomiser is making contact with the battery terminal.
Why is my blu blinking blue and not hitting?
If your battery flashes continually, it's an indication of a problem with the battery's performance. To fix the issue, try cleaning the battery first.
Why does my blu vape flashing blue?
Re-charging: When the blue battery light starts flashing it's time to recharge the device. Simply unscrew the clearomiser (tank), and screw on your safe-charge USB cable onto the battery, plug it into your blu mains adaptor (sold separately) or USB port.
How do you know if your blu is charging?
Connect the rechargeable device to the USB cord with the charging contacts properly aligned. Once your device begins charging, the red light on the end will glow and remain illuminated. When the indicator light turns off, your blu is fully charged.
Why is my vape flashing blue?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
What do you need to start vaping?
When you first start vaping, you want to make sure you’ve got all the essentials, which is likely to include a charged battery and a filled clearomiser or cartridge. If you’ve got both of these, you’re all ready to start vaping.
Can you charge an e-cigarette at night?
It’s a good idea to get into a routine of charging your e-cig during a certain period of the day. While it’s easier to leave it to charge at night while you’re asleep, this can damage the battery. Try getting into the habit of putting it on to charge whenever you start cooking or reading a book.
How to open a blue liquid bottle?
Open the blu Liquid bottle by pushing down on the cap and turning it to the left.
How do I know when I need to charge my blu PRO™?
The blu PRO™ has indicator lights to help you monitor the remaining charge on the battery and an upgraded battery connection. This means it can be fully charged in just 3 hours and will last for longer than ever.
How to fill a clearomiser with blue liquid?
To fill your clearomiser with blu Liquid, complete the following steps: Unscrew the mouthpiece. Open the blu Liquid bottle by pushing down on the cap and turning it to the left. Gently fill the clearomiser with blu Liquid. Use the clear window to monitor the amount of blu Liquid in the clearomiser. Do not overfill.
Why does my USB charger light turn blue?
The light on the USB Charger will glow red and the tip of the device will flash to indicate that it has started to charge. Once the device is fully charged, the light on the USB Charger will turn blue. If the light does not glow when the USB Charger is plugged in, the device has not been screwed in correctly.
Can you recharge a blue clearomiser?
Your rechargeable device will arrive partially charged so that you can get going straight away. All you have to do is fill and prime your blu PRO™ Clearomiser before using it .
How do I refill myblu?
myblu is refilled using liquid pods which click onto the device. When each is finished, simply remove by lightly pressing on the sides of the liquid pod. After disposing of the old pod you can immediately attach a new one to the myblu.
How do I charge myblu?
Every myblu is shipped with a partial charge but we recommend charging it fully before you start using it. To charge myblu, follow these steps:
How long does a Myblu battery last?
The myblu battery will last for approximately 4 hours between charges depending on how much you use it. As with the battery running low, you will also get less vapour and a weaker flavour when your liquid pod is empty. Each liquid pod has a clear chamber which allows you to check if you have run out of vape juice.
