- Plug the micro USB plug into the bottom of the Yocan Evolve Plus battery, just below the “Yocan” logo.
- Plug the large USB plug into your computer that supports USB 2 or USB 3.
- A small red LED will light immediately, and stay on while charging. When the charging is complete, the LED light will turn off.
How do I know when the yocan Stix battery is fully charged?
Unlike other pens that can be hard to tell when the battery is fully charged, gauging whether the Yocan Stix battery is charged is easy. If the LED indicator turns off during charging, that means the battery is full. Another thing you’ll love about this pen is how easy it is to switch on and off.
How do I charge my vape pen?
First, ensure that the battery of the pen is fully charged. If so, press the power button five times. Once the LED indicator flashes, you are good to go. To start vaping, with the mouthpiece in between your lips, press and hold the power button as you inhale the vapor.
How to fix yocan vaping device not working?
#1 Try to use a q-tip with Isopropyl alcohol clean the contact points. #2 Install a brand new coil or atomizer. If you device still can’t working, please contact the store you bought it from, they will help you fix this problem. If you continue to have problems, please retain the affected device and submit your question on Yocan Vaping Forum.
How do I charge my yocan Evolve Plus?
1 Plug the micro USB plug into the bottom of the Yocan Evolve Plus battery, just below the “Yocan” logo. 2 Plug the large USB plug into your computer that supports USB 2 or USB 3. 3 A small red LED will light immediately, and stay on while charging. When the charging is complete, the LED light will... More ...
How do I know if my Yocan is charged?
Indicator light will glow when it is charging. In around 1 hour the battery will be fully charged. Once fully charged, the indicator shuts off. Safety cutoff: If the power button is pressed continuously for more than 15 seconds, three lights will flash 8 times before powering off.
How long does it take a Yocan to charge?
While the battery might not be able to hold up to an entire day of heavy or rigorous use, its perfect for those short one-off vaping sessions. Somewhat making up for the lack of battery longevity is the Yocan Kodo's fast charging speeds which allow the device to reach a full charge in just less than 30 minutes.
How do you know when Yocan Regen is fully charged?
How to use. The Regen features a design that makes it easy to use, even if you're unfamiliar with vaping. The first step is to make sure your device is fully charged, the three LED lights near the button should be lit up blue.
Why is my Yocan blinking when I try to hit it?
Why does my pen blink when I try to hit it? Yocan dab pens and herb vaporizers usually blink when there's a loose connection.
Why does Yocan Flash 5 times?
* The cartridge center pin is recessed and not making sufficient contact, the UNI mod can't load the cartridge correctly, and flash 5 times.
Why is my Yocan blinking 10 times?
We know that when the Yocan Evolve Plus XL is blinking 10 times, the device needs to be charged. Similarly, when the G Pen flashes 10 times, the battery is basically dead. The easy solution to this problem is simply recharging your battery.
Why is my Yocan blinking 4 times?
Yocan Evolve Plus Blinks 4 times for short circuit and connection issues between the vape battery and coil. This typically means your coil is no longer working and needs to be replaced.
How do you use a Yocan battery?
Using the Yocan Armor Battery: With a fully charged battery, turn the device on by pressing the power button five times quickly. Press the power button and hold it down to activate the heating element. Let the button go to stop heating.
Why is my Yocan plus blinking 3 times?
Pull the bottom of the coil cartridge out a little bit and screw cartridge back on battery and that should fix the problem. If not, it's probably a bad battery.
How do I get my Yocan to work?
Using the Yocan Explore Vaporizer To turn it on, just click the button 5 times. To engage the heat, just click the same button and hold for 3 to 5 seconds. It heats continuously for 5 minutes and shuts off automatically. To adjust the temperature, use the up and down buttons.
Why does my vape light up but not hit?
A disposable vape uses an airflow sensor to detect when you puff. Sometimes, a disposable vape that doesn't hit isn't working because the airflow sensor isn't sensitive enough or because the sensor is blocked by condensation inside the device.
How long do Yocan coils last?
According to the Yocan website: “The lifespan of a coil depends on your vaping habits. Generally, you need to change coils after every 1 to 4 weeks of usage. If you vape very frequently, you may find that your coil only lasts between five and seven days.
Can you use Evolve Plus while charging?
Charging is a snap, just two hours or less a pop, and with the Evolve Plus vape pen, you can use pass-through charging technology, which means you can vape while charging. However, in general, a battery should be left to charge, and then used when it is done charging.
How to fix the Yocan Evolve Plus not charging?
The yocan evolve plus xl not charging troubleshoot is similar with the yocan evolve plus battery not charging fix. First of all, let talk about the load method of the Yocan Evolve Plus.
Why is my atomizer light flashing?
The light around the on/off button, flashed every time if you have some connect error. And please checke the pins in the charging port, or changed the charge cable, turned it off, waited an hour and turned it back on. If your device still can’t work, try to opene the mouthpiece to look down at the coil and make sure all element looks fine. Then check the battery- atomizer connection problem. If you have another coil or atomizer, please try to install the new one. Sometimes, the connection error also resulting you can’t charge your device.
How many mAh is the Yocan Evolve Plus battery?
Draining the Yocan Evolve Plus’ battery will be a difficult task, as the battery capacity is a amazing 1100mAh integrated battery, and features a micro USB port.
Why is the Yocan Evolve Plus coil open?
The Yocan Evolve Plus was designed to have the mouthpiece slide open for easier loading . The coil cap is built into the mouthpiece, so the coil can remain open for top loading. It is so much easier to load and refill. Another benefit to top loading is eliminating the need to touch a hot, sticky, oily coil when it needs refilled mid smoke session.
What is Yocan Evolve Plus?
The Yocan Evolve Plus is an attractive, affordable, powerful unit for someone looking to upgrade out of a standard button-activated vape pen. Due to the slim like design this device incorporates a single button. Users can get a full readout of the device through the LED light surrounding the fire button.
How long does it take for an evolve plus battery to charge?
2 hours. When using evolve plus battery the first time, make sure the device has been fully charged. 2 hours are in need for it’s charging, and the red light dismissed when finish. Don’t treat it as a disposable rag, to leave it everywhere each time after used.
What does a red LED light do?
A small red LED will light immediately, and stay on while charging. When the charging is complete, the LED light will turn off.
How to fill/load your device ?
To fill the juice atomizer,unscrew the mouthpiece,take your syringe or juice vape refill bottle,tilt an angle along the side of the glass and squeeze out the juice (Do Not fill exceed 0.8ml). To load the concentrated atomizer,unscrew the atomizer tube,using your dab tool to put your desired concentrates on the quartz coil. Reattach the mouthpiece/atomizer tube by screwing it on when it is filled/loaded. Then insert the atomizer in the mod.
How to know the Hive 2.0 is on ?
As many other devices,click the power button 5 times quickly to turn on the Hive 2.0 ,then the 3 blue lights will flash 3 times in the meantime. That means your device is on.
How to know your device needs to be charged ?
When it’s on charging,the 3 bule lights will flash in loop. If the battery charged to 35%,the first blue light stay on,and the other two lights keep flashing in loop. When it’s charged to 70% the first light and second light stay blue,the last light keep flashing. When it’s full charged,the all 3 blue lights will flash 8 times in the same time,and then the lights go out.
How to adjust the voltage on a hive?
The outpout voltage can be adjusted for different occasions,press the power button 3 times rapidly can adjust the voltage level.Only 1 light shows blue means it’s low voltage,2 light shows blue means middle voltage,3 light shows blue means high voltage. When your device is middle voltage,press the power button 3 times to switch it to high voltage,then press button 3 times again the voltage will turn to low voltage. Hold the power button and enjoy vaping after adjust to your desired voltage level.
How many times does the blue light on a hive flash?
As many other devices,click the power button 5 times quickly to turn on the Hive 2.0,then the 3 blue lights will flash 3 times in the meantime. That means your device is on.