When the Kanger Evod battery power is low, the LED will flash approximately 15 times when the button is pressed to indicate that the battery needs to be charged. The Kanger Evod battery can be charged by removing the attached clearomiser/atomiser, which then exposes the thread on the end of the battery. Connect the battery to the charger by bringing the threads togetherand turning in a clockwise direction. Next, holding the charging lead, plug the small end (mini USB plug) into the battery and the other end (standard USB) into a USB charging port. The USB charging port can be found on a mains adapter (see below), or a USB port on a personal computer. When the battery is plugged into a charging source, the LED light within the batteryswitch/button will flash a number of times and then the CHARGER will show either red to indicating 'charging' or green to indicate 'charged' Depending upon the charge within the battery, it could take up to 4 hours to fully charge the battery. Batteries are part of modern everyday life and we take them for granted - but all batteries can be very dangerous if proper precautions are notobserved. Be sure to use the recommended battery for your device. Don't assume that just because a battery fits, it's okay to use. Check with the manufacturer or supplier. Store in a cool place, avoiding direct sunlight. For example, it may sound obvious, but do not leave batteries or electronic cigarettes on the windowsill, fireplace, oven, radiator or car dashboard! Loose batteriesshould have their contacts protected by storing in original packaging. Charging Batteries Always use the correct charger for the battery you are charging - ALWAYS! NEVER use an iPhone or other charger - they may output too much current and cause batteries to overheat or explode. USB 3 ports (as found on video consoles and newer PCs and laptops) should NOT BE USED asthey have at least double the output of a standard USB port. If in doubt, do not use! When charging, place batteries on a hard surface such as a kitchen worktop, NOT on the carpet or other combustible surface. Avoid leaving batteries unattended whilst charging, keep an eye on them and cease charging before retiring to bed. Do not try to charge damaged batteries. If charging highdrain unprotected batteries, be sure to use a suitable charger with auto cut off. Do not over charge or over discharge batteries - cease charging as soon as they are fully charged and charge before empty. If a battery becomes hot during charging - STOP CHARGING and allow to cool down before handling further. Rest after charging - let them cool fully before using, ideally for afew hours. Disposing of BatteriesPlease do not simply throw dead or damaged batteries in the waste bin - dispose of batteries carefully, by taking to one of the following locations: Local authority recycling plant or 'tip' - UK recycle centres near you - Often local supermarkets offer a battery disposal point. Other designated battery disposal point. BE BATTERY SAFE! Home >KangerTech EVOD Manual Battery Forums > Assorted > Archives > Model Specific Discussion > eGo Type Models > Discussion in 'eGo Type Models' started by cturboaddict, Jan 26, 2014. Thread Status: Not open for further replies. Image has been removed. URL has been removed. Email address has been removed. Media has been removed. (You must log in or sign up toreply here.) Thread Status: Not open for further replies. Before you start using a brand new atomizer you first need to prime it, this means getting the wick material nice and saturated before applying heat. If you don't prime your atomizer before you go to use it, all of the dry wick material inside of the atomizer will burn up and the coil will be damaged, possibly requiring a new one.There are a couple different ways to prime your atomizer, one way to do so is before you fill up your tank, drip 3-5 drops of e liquid directly into the top of the atomizer and while that soaks in you can also add a drop onto each piece of wick you see poking out of the side of the atomizer. This method ensures that the atomizer is fully saturated before use but if you are in a hurry ordon't have any e liquid with you besides what is in your tank, there is another way to prime.For the other method of priming, all you do is replace the old atomizer with the new, reassemble your tank, then without applying any power to the Kangertech EVOD battery, take at least 5 strong pulls on the mouth piece. This will help pull some of the e-liquid in your tank down into theatomizer, saturating the wick.It is possible to get too much e-liquid into the atomizer initially and it could end up “flooding” the atomizer, this can cause e liquid to spit up through the mouth piece or to be leaked out through the bottom of the tank - but again if you don't put enough, the atomizer could get burnt up right away. It's kind of a balancing game of how much e liquid youneed to use to prime your atomizer, but after a few go's at it, you should be able to do it in a snap with no problems. Flooding and Leaking issues Over priming and certain environmental elements can cause your atomizer to flood or your tank to leak. Elevation changes, extreme warmth or cold and over/under tightening are all instances that can cause these issues. Although asmall amount of leaking is completely normal and to be expected, occasionally you may experience some major leaking issues. If this occurs, disassemble your vape pen and wipe all the e liquid off of it; make sure to get the top of the battery where the tank connects, if too much e liquid gets in there or it's left for too long, the EVOD battery can be damaged possibly beyond use.Before reassembling try to think about what caused it to happen in the first place, ask yourself questions like was your tank over/under tightened, are you traveling into a major altitude change, was it left in too warm of an environment, ETC.. With the power of deduction you should be able to figure out why it happened and from there you can reassemble your vape pen andhopefully prevent it from occurring again right away.If your atomizer is flooded, whether is be coinciding with leaking issues or just from over priming your coil, there are a few things you can do to help it dry out a little. One trick is to flip your vape pen upside down so that the juice isn't flowing down into the atomizer. After you've got your device upside down, hold the button to fireyour Kangertech EVOD battery and blow into the airflow holes, this will help shoot all the excess e liquid out of the mouth piece. Another way you can get the atomizer to dry out a little more is to disassemble your vape pen all the way, then wrap your atomizer in a tissue and give it a good shake. Flooding and leaking issues can be a pain to deal with especially when you're soused to just lighting up a cigarette and that's that, but hang in there cause once you get a handle on these issues you can continue your endeavor to successfully quit smoking cigarettes.Cleaning your Kangertech EVOD Forums > Vaping and the E-Cigarette > General Vaping Discussion > Tags: Thread Status: Not open for further replies. Image has been removed. URL has beenremoved. Email address has been removed. Media has been removed. Thread Status: Not open for further replies. So happy to find these! This is the only charger for my battery. I haven’t been able to find them for some time. I was so glad to find them at Vapor Authority! These are quality products, packaged well and shipped quickly at a very reasonable price! Thank you!
What is the voltage output of the Kanger vape?
With the 650mAh battery and a voltage output of 4.2v (when fully charged) this is sure to give you a great vape and is more than enough to keep you going for the day. Kanger uses a light indicator to tell you that the battery is low and you recharge using the USB cable provided.
Are kangertech starter kits any good?
The engineering is near perfection, smooth threading at top and bottom of the tank. A simple, very effective device that is great for the new vaper who is wants to quit smoking. KangerTech is a trusted brand known for quality and the Top EVOD starter kit shows just that.
What is the best vape for beginners?
The Kanger top EVOD is the style of vape that most of us used when we just started out on our vaping journey — and this makes this setup ideal for beginners. The KangerTech Top EVOD Starter kit comes in red, white, black or silver with matching tank, a black mouthpiece, and various contrast features.
How do I know when my Kangertech is charged?
2:164:37KangerTech Evod VV Battery Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust stay red the entire time they're charging. And then turn green to let you know they're doneMoreJust stay red the entire time they're charging. And then turn green to let you know they're done charging.
How long does it take to charge a Kangertech battery?
3-4 hoursIt takes 3-4 hours to charge an EVOD battery completely. Batteries can be charged by it are, 650, 1000 & 1500 mah EVOD batteries.
How do you charge a Kangertech vape pen?
Connect the battery to the charger by bringing the threads together and turning in a clockwise direction. Next, holding the charging lead, plug the small end (mini USB plug) into the battery and the other end (standard USB) into a USB charging port.
How do you turn on a Kangertech vape pen?
To turn ON / OFF press the fire button 5 time in 2 seconds. Squeeze the plastic bottle (Squonking) to get your desired amount of liquid into the tank, press the fire button and vape. If the button is pressed for more than 10 seconds the unit will automatically shut down. Release the button and fire again to reactivate.
Why does my vape blink 10 times?
Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Can I charge my vape with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.
How do you use a Kangertech vape pen?
3:404:35How to Use a Kanger Evod Kit - FlavorPuff.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipProduct high build quality to turn it on simply press the button three times it'll blink and thenMoreProduct high build quality to turn it on simply press the button three times it'll blink and then press it to start vaping that concludes our review of the kangertech Evod kit happy vaping.
Why is my EVOD blinking 3 times?
Battery LED flashes 3 times If the LED still flashes 3 times without the tank you know it's something to do with the battery, if it only flashes when it's connected to the tank it could be the that there isn't a good connection, or it could be the coil head.
What happened to Kangertech?
Kangertech decided to try and change the game again by taking the ideology of the topbox and merging it into one, single product. The Nebox was introduced in 2016 and did great at first.. Until all the leaking issues happened. The Nebox fell short of being successful because no matter you did, it would leak everywhere.
How do I get my Kangertech to work?
0:251:21Turning on a Kangertech Battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you get your kit charge your battery. And then. I turn it on and now that's ready to go. SoMoreSo when you get your kit charge your battery. And then. I turn it on and now that's ready to go. So we'll just try it out. And all good so that's how you turn on a kangertech battery.
How do you set up a Kangertech vape?
1:368:04KangerTech SUBOX Mini C Starter Kit | Overview & How To Use - YouTubeYouTubeStart of suggested clipEnd of suggested clipDisplay on here fire button up/down buttons micro USB port that is it there's no switching the menuMoreDisplay on here fire button up/down buttons micro USB port that is it there's no switching the menu system at all it's just simple it shows you your battery life the resistance of your coil.
How do I turn on my Kangertech Kbox mini?
To turn the KBOX MINI-C on, fast click 5 times the power button. This is how you turn the device on and off. The screen's orientation can be changed by holding down the “+” and “-” signs at the same time.
gandymarsh Ultra Member Verified Member ECF Veteran
You should be reasonably safe using that adapter. There is no 100% safe in anything.
Gramdogg Ultra Member ECF Veteran
both are fine, fore mentioned chargers to buy do 5v 500mah and have over charge protection, trickle charge when full. The drip box have battery life display? If not you'll never know when it's charged. You will want an extra battery and charger soon anyways so you dont have to wait 6 hours to vape.
Gramdogg Ultra Member ECF Veteran
Of the two you have the 550mah is better for your battery. More mah will charge faster but weakens its life expectancy faster as well.
Gramdogg Ultra Member ECF Veteran
ok just make sure you keep an eye on it and unplug when done till you get proper charger.
Gramdogg Ultra Member ECF Veteran
"The fire button will change to green" also VTC5 is 2600mah VTC4 2100mah... 2600mah should last most of a day.
zmeddy New Member
both are fine, fore mentioned chargers to buy do 5v 500mah and have over charge protection, trickle charge when full. The drip box have battery life display? If not you'll never know when it's charged. You will want an extra battery and charger soon anyways so you dont have to wait 6 hours to vape.
KangerTech Top EVOD Starter Kit Review: Operating The Battery
With a very simple and easy design you need only to click the button five times to power the Top EVOD on and five clicks again will power off the device.
KangerTech Top EVOD Starter Kit Review: Threading Compatibility
With the 510 threading, you have plenty of options with clearomizers that utilize both the 510 and the eGo threading, allowing you to find what works best for you. The threading is smooth and the connection is solid. I tried a few clearomizers that I had laying around and they all worked, flush and with a solid connection.
KangerTech Top EVOD Starter Kit Review: The Tank
Very little is being said about this starter kit but it is a blend of EVOD technology plus the Top Tank. This version of the top tank holds 1.7mL of E-juice that can last all day and provides you with four airflow holes. The tank uses VOCC-T (Vertical Organic Cotton Coils) and is designed to be refilled from the top or the bottom of the tank.
KangerTech Top EVOD Starter Kit Review: Conclusion
A simple, very effective device that is great for the new vaper who is wants to quit smoking. KangerTech is a trusted brand known for quality and the Top EVOD starter kit shows just that. Had this kit been available to me when I quit smoking, I would have had no issues at all. This is a very simple device.
