The LED lights indicate the battery level — green when it is fully charged and red when the battery level is low. It comes with a 0.5ml tank for oil and wax. Thanks to the ceramic core element of the Honeystick Elf, you can enjoy rich flavor and substantive amounts of vapor. BUY NOW
Full Answer
How to fix a vape pen battery that won’t charge?
Heat a pot of water on a stovetop, until steam is produced. Then hold your vape pen over the steam for 20 seconds. This should result in the same effect as the hairdryer method, with your cannabis oil becoming less viscous. Before troubleshooting vape pen battery issues, it’s important to know what kind of battery your vape pen uses.
How to troubleshoot cannabis vape pen problems?
More often than not, once you identify the issue with your vape pen, you’ll be able to troubleshoot. Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart.
How long do vape pen batteries last?
A powerful vape pen battery, e.g., a 1200mAh battery, will last around 10-12 hours once it is fully charged. On the other hand, a 650mAh battery will last half of the time. The durability of a vape pen battery depends on how often it is used.
How powerful is the tsunami V power vaporizer pen kit?
It also has a powerful 1300 mAh Variable voltage rechargeable battery that holds many charges and will get you vaping for quite a while when fully charged. The pen also has a suitable USB charger accompanied with it, plus the pen itself is sleek and compact in your hands, as it is also leakproof. How to Use Tsunami V Power Vaporizer Pen Kit
How do you know when your vape battery is low?
You can also tell your vape battery needs a swap if your device constantly indicates 'low battery' when you bump up the wattage slightly. Lesser hits are another giveaway of a weakening battery.
How do I check my vape pen battery?
Your vape pen will have a light indicator on the LED to let you know what the battery needs. The low battery signals with a red light or flashing white light (depending on the model), meaning you need to charge it. Once the light on your screen turns green you know it is fully charged and ready to be used.
How can you tell how much is left in a vape pen?
If you have a cartridge with a transparent viewing window inside, you will be able to see how much oil is left. If it has turned orange inside, then that means the cartridge oil is about to finish up. Also, when the vape cartridge is towards the end, then the smell of the essential oils changes towards a smoky smell.
How do you know when your vape has run out?
After using the device for a long time, the vapour becomes thin and flavourless. Your e-liquid is running dry when what you get at this point when you vape is thin and tasteless vapour. In other words, your puffs are not that satisfying anymore.
What do the colors on my vape pen mean?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
What does the blue light mean on a vape pen?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
Why is my vape flashing?
Generally, a blinking light indicates that the vape pen is trying to warn you that your device is not working as it should or the battery is low.
How do you make a disposable vape hit after it dies?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How do you get a hit out of an empty cart?
If it won't come down try applying heat to the outside of the cartridge like we mentioned above. Just run the lighter back and forth on the glass for a few seconds. That should be enough to get all the good stuff out. Once the liquid reaches the mouthpiece, heat up your dab rig.
How long does a vape last in your lungs?
“In the first 20 minutes: your blood pressure and heart rate recover from the nicotine-induced spikes. After 12 hours: the carbon monoxide levels in your blood return to normal. After two weeks: your circulation and lung function begin to improve.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
What causes a short circuit in a battery?
Short circuit. Clean the electrodes on your battery, there is likely debris that has caused a temporary short. Cartridge is clogged, nothing happens when you pull. Depending on how it was put away or when it was used last there may be some some oil residue in the air hole.
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
What is the bottom airflow cartridge?
Bottom-airflow cartridges have an air hole in the middle of the pin on the bottom of your cartridge. This allows the battery to activate when you inhale. Bottom-airflow cartridges will work with inhale and button activated batteries.
How to clean a battery?
Clean the inside of your battery with rubbing alcohol and q-tip to remove any oil build up. Only use a little bit on the q-tip, and allow some time to dry before using. Avoid using and storing your battery in extreme temperatures, and always keep your battery away from water and extremely humid conditions.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
How many times does a vape pen battery turn on?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
How long does it take to learn to use a vape pen?
It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one.
What to do when your vape is not in use?
Tips for When Your Vape is Not in Use. Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.
What is a dab atomizer?
Dab - The mode meant for vaping cannabis extracts with a 510-thread wax atomizer, and is indicated with blue lights. It can also be used with THC cartridges that can take this voltage setting. But do not use this setting with any vape cartridge unless you're certain it's capable of vaping at this voltage.
What is the dab mode on a vape?
The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale. The first three settings are perfect for those who want to vape without having to press a button, and will vape THC cartridges by simply inhaling.
How long does it take for a vape puff to stop heating?
This means the pen will stop heating the cartridge after a certain amount of time. Most pens will have this occur around 8-seconds.
Can you vape with a 510 atomizer?
The O.pen has evolved into the 2.0 version with multiple temperature settings, including a dab mode. So, you can enjoy vaping your favorite cannabis extracts with your choice of 510-thread wax atomizer. There are many aspects to consider when purchasing a vape pen battery.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What to do if your vape connectors are skew?
If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection. With clean hands and on a clean surface, try taking apart the various parts of your vape and wiping them with a dry cloth or tissue. Then, reassemble it and try to have a hit. 5.
How to stop vape from firing?
To test if this may be the issue with your vape, press the fire button three times in quick succession, then give it another go.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
Why is there an LED light behind my vape?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience , especially if the device doesn’t have a digital display.