Check the 510 Pin on your Tank If the 510 pin on your tank is damaged (where it connects to the mod) then this will cause a “Check Atomizer” or “No Atomizer” error. This is because your tank isn’t making a proper connection with your mod.
Full Answer
Why is my vape mod not producing vapor?
Aug 26, 2016 · Keep your battery venting holes clean and clear of debris as well. Checking your battery connections and making sure these are free of debris is very helpful as well. Make sure to wipe off any juice that gets on your device as the ejuice …
Why won't my tank work with some mods?
Shorting issues: If your coil is coming in contact with the sides of the tank, it may be shorting your coil. Make sure your atomizer is situated in the center, without touching the sides, and adjust it if it’s not. Burnt or “off” flavors from a vape pen. Sometimes when you vape, you’ll experience a “ dry hit ” or a burnt one. A dry hit is a sign that the coil’s wick is drying up.
Why is my vape not reading my atomizer?
Oct 13, 2019 · A few different connection-related issues could be to blame for your lack of vapor, and these are generally straightforward enough to fix. The tell-tale sign of a connection issue is that your mod or device is switched on, but it doesn’t recognize your coil or throws up an error message like “no atomizer.”
Why won't my vape pen connect to my coil?
1. Disassemble the Tank. The first step to cleaning your vape tank is disassembling your device. You should separate the: Drip tip; Tank lid; Base; Coil; You should also separate the tank itself from the vape. Then inspect the different elements and see which ones need cleaning. 2. Remove Leftover E-Liquid. From there, dispose of all visible e-liquid by tipping it out of the tank.
How do I know if my vape mod is bad?
Why is my vape mod not working?
Can you mix tanks and mods?
How do you tell if your atomizer is broken?
How do I get my vape mod to work?
When should I replace my vape mod?
Can you interchange vape tanks?
Can you use any coil in any tank?
Can I put an RTA on any mod?
Why does my mod say no atomizer?
How do you know if your coil is a dud?
...
6 Signs That Your Vape Coil Needs to be Replaced
- Experiencing a "Burnt" Taste in Your Mouth. ...
- Your E-Juice Tastes Funky. ...
- Leaky E-Cigarettes. ...
- Hearing Gurgling Sounds. ...
- Poor Vape Production.
How do you check a vape atomizer?
Why is my e-cigarette not producing vapor?
There are many potential reasons your e-cigarette might not be producing vapor, but they can be broken down into issues with your battery, connection problems, issues relating to your tank and road-blocks put up by the software on a mod. Generally speaking, you’ll be able to solve your problem without taking it into a vape store for a repair ...
Why won't my e-cigarette fire?
The most obvious problems that could lead to your e-cig not firing are that your device isn’t switched on, that your battery isn’t charged or that your wattage setting is too low. Most devices switch on with three or five quick presses of the fire button, so try that first – usually an LED will flash or the screen will activate so you can see when it’s switched on. If this doesn’t work, the battery could be depleted, so try plugging your device into a charger (for mods with on-board charging or in-built batteries) or removing the battery and charging it separately (for devices with removable batteries).
First Things First
There are different types of 510 connectors. You have spring-loaded 510’s, static (or pressure fitted) 510’s. and screw-head 510’s on the male side of the equation, and spring-loaded or static 510’s on the female side.
Step 1. Make Sure Everything Is Clean
Any grime on the connection points or inside the threads could cause a problem. Everything can get nasty over time, grit and dirt can get down inside the hole, e-liquid can build up in there if you are a chronic over dripper ( like me ), and the dirt can either prevent a solid contact or create a short between the positive and negative terminal.
Step 2. Does Everything Meet In The Middle?
We have to make sure that we are getting a solid connection between the male and female halves of our system as one of our most common problems is a short positive on the male 510.
Step 3. Are The Insulators In Good Working Order
Wear and tear is inevitable. We put these machines through hell on a daily basis, drown then in e-liquid, heat them up to crazy temperatures and just expect them to carry on regardless. Over time the insulators between the connection point may get thin or wear out completely (especially on adjustable 510’s), which could cause a short.
What is a versed vaper?
The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!
What causes a check atomizer short?
Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.
stols001 Moved On ECF Veteran
You have a connection issue, likely with the mod if your tank works on other mods. Are you certain that the mod worked from the person before with that tank? Some tanks/mods are more finicky than others when it comes to connection, but if it is merely spinning, that sort of sounds like the mod to me.
Wraith504 Ultra Member Verified Member ECF Veteran
Sounds like you may have some stripped threads or something with the 510 connector on the mod. or the threads on the 510 of the tank.
SteveS45 Moved On ECF Veteran
Post some pictures to try and help because you should be able to see stripped threads easy enough but it sounds like the 510 connector is loose in the MOD.
vapdivrr Vaping Master Verified Member ECF Veteran
If it just spins now, it's broken . Take some pics, maybe we can figure it out better...mini volt is kind of cheap imo , tried one once and it lasted a few months and wouldn't fire anymore. Probably stripped....
Coastal Cowboy This aggression will not stand, man! Verified Member ECF Veteran
You might resurrect it by using an ego/510 adapter or 510 heat sink. These sometimes do a better job of catching on janky threads. They go between the mod and the tank and destroy the aesthetics, but they can work.
BrotherBob ECF Guru ECF Veteran
I just got a mini volt v3 40w kit by council of vapor with a smok spirals tank, the tank doesn’t sit tight on the mod, it just spins and says no atomizer no matter what I do. It worked for the person I got it from less that 24h ago so I don’t know what happened or why it’s not working for me.
r77r7r ECF Guru ECF Veteran
I'd try lifting the post on the battery to make better contact first. Then, wrap some plumbers tape or tissue on the threads of the tank to get some grip.