How To Take Apart a Vape Pen. If you are looking to take apart a vape pen, there are a few steps that you need to follow. First, loosen the screws that hold the battery in place. Once the screws are free, you will be able to remove the battery. Next, remove the cover that is protecting the atomizer. Finally, you can dismantle the atomizer.
Full Answer
Why do I flip my vape pen upside down?
What is an evod vape?
How to change atomizer on Kangertech evod?
How to fill up a vape tank?
How to remove battery from EVOD?
What coils are used for EVOD tanks?
Why does my vape pen leak?
See 2 more
How do I open my EVOD vape pen?
2:104:35How to Use a Kanger Evod Kit - FlavorPuff.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then these coils are replaceable. So you simply pop the coil out put a new one in and bam theMoreAnd then these coils are replaceable. So you simply pop the coil out put a new one in and bam the clearomizer is back to like-new condition.
How do I open my EVOD battery?
1:128:06How to open a vape stick pen to replace the battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd screws counterclockwise take off the little adapter. Again counterclockwise and then you'll haveMoreAnd screws counterclockwise take off the little adapter. Again counterclockwise and then you'll have the stick itself with the battery.
How do I clean my EVOD vape pen?
0:003:39Clean Your Atomizer - Protank EVOD MT3 T3 Kanger - YouTubeYouTubeStart of suggested clipEnd of suggested clipHey guys we're gonna do a real quick video today I'm gonna show you how to clean the atomizer onMoreHey guys we're gonna do a real quick video today I'm gonna show you how to clean the atomizer on your pro tank or Evod. Each cigarette this will give you some more life out of it.
How do I clean my EVOD battery?
1:349:16How to Clean & Dry Burn Kanger EVOD & MT3's - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's that flavor with on the top there. You want to pull that flavor wig off. Right there and setMoreThere's that flavor with on the top there. You want to pull that flavor wig off. Right there and set it down to the side. And then you just have your coil. And at that point you just want to turn the
How do I unscrew my vape?
All you need is to run the vape tank under falling hot water for some minutes, two to five at most. If you're using a mechanical mod (mech mod) remove the batteries and submerge your mod in a mixture of hot water and vinegar. Now, don't mistake “hot water” for boiling water. The latter can break your vape tank.
How do you refill a EVOD vape pen?
0:060:51How To Fill A Kangertech EVOD - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank.MoreThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank. And fill down the side. Making sure not to get any liquid down the center hole.
Why does my vape pen clog?
When you find your vape pen clogged, it's typically clogged due to condensation. It's impossible to be sure that you've inhaled every last bit of vapor from your pen and inevitably, there will be some residual condensation left in your mouthpiece.
How do you fix a cart that is not hitting?
The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it.
Why is my vape pen not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
Why is my EVOD vape pen blinking?
If your battery reads too low, the device will blink red and shut down. If your device overheats, it will blink three times before turning off. In the case of a short circuit, the mod will turn the device off automatically.
How do you take apart an ooze battery?
To remove the battery, open the ooze pen's casing; if the batteries are removable, you must disconnect them before recharging. Find the battery cover on the base or side of the pen. Reach it and open it with the finger latch or tab.
How do I change my vape battery?
0:000:45How To Change The Battery on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipDoor. Simply pull back the tab with your finger. And the spring should cause the battery door toMoreDoor. Simply pull back the tab with your finger. And the spring should cause the battery door to open. When replacing the battery insert the battery with the positive node side facing.
How do you fill a EVOD Twist 2?
5:0011:23EVOD Twist Clone Starter Kit (How To - Beginners Guide) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to fill this one up you're really going to turn it upside down just like so take the bottom capMoreSo to fill this one up you're really going to turn it upside down just like so take the bottom cap here and just turn. Turn and then this piece will come out right here. And you have the tank portion.
How do you open a vape pod?
You can use a small screwdriver for it to get the cap off the pod. Take a screwdriver and place it under cap: There is a plastic cap on the JUUL pod and a hole on the side of it. Put the screwdriver gently under that hole and take it up.
Using the EVOD Starter Kit – Slim Vape Pen
Using the EVOD Starter Kit Unboxing, Using, Charging, Cleaning and all working parts of the EVOD Starter Kit. At Slim Vape Pen we recommend the EVOD Starter Kit for vape pen users of all experience levels, from beginner to long-time user. This is a fantastic, basic vape pen that works great when you need it to and doesn’t have any fuss about it.
Ego Evod won't turn on | E-Cigarette Forum
If the light comes on when you charge, but not when you press it, the only thing i can think of is the 5-click on feature. Is the button loose or tight when you press it?
Why do I flip my vape pen upside down?
I'd recommend to flip the vape pen upside down for the duration of the trip when you're not using it, this keeps the e liquid from being pulled down through the atomizer and out of the bottom of the tank.
What is an evod vape?
The EVOD provides a similar experience to what we are used to with combustible cigarettes. The vapor production is slight, not over powering and won't choke you out, so it's easy vaping for beginners. These kinds of e cigarette starter kits are generally some of the most simple and easy to use as they only have one button to turn on/off and the same button is used to power the EVOD battery. In this article we are going to get you a little more familiarized with your Kangertech EVOD.
How to change atomizer on Kangertech evod?
In order to change out your atomizer you first need to take the tank off of the Kangertech EVOD battery. Once you have the tank separated, remove the base of the tank to reveal the atomizer, if you have e liquid inside your tank you might want to do this with the tank upside down to prevent the e liquid from getting spilled. Now that your base is separated from the tank, grip onto and unscrew the atomizer. If you are unsure as to what the atomizer is, it is the small cylindrical metal tube sticking straight up from the base, you may want to review the other article on here titled, What is Vaping?: E Cigarette Vaping Basic's. With your atomizer removed you can now prime your new atomizer and reassemble your vape pen.
How to fill up a vape tank?
In order to fill up your vape tank, you need to take it off of the EVOD battery and remove the base of the tank. If you already have a little e liquid inside, you might want to do this upside down so that the remaining e liquid doesn't spill out and make a mess. Now that you have the base of the tank off, turn the tank upside down, ...
How to remove battery from EVOD?
In order to take the tank off of the battery, you first need to grip the silver ring under the colored part and glass windows with a finger and thumb, while holding the battery firmly in the other hand. (If you have an all silver kit, you should be able to see a line where the base separates under the glass windows of the tank.) After giving a little twist to the silver ring, the tank should start to unscrew and come off of the battery. Now to take the tank off of the base, you need to grip the same silver ring you did before, again with a finger and a thumb while this time holding the rest of the tank gently, but firmly, in the other hand. Then give the silver ring a little twist and it should start to unscrew from the rest of the tank, now you can see that the silver ring is the base of your tank.
What coils are used for EVOD tanks?
Kangertech SOCC Coils for the EVOD Tank.
Why does my vape pen leak?
Over priming and certain environmental elements can cause your atomizer to flood or your tank to leak. Elevation changes, extreme warmth or cold and over/under tightening are all instances that can cause these issues. Although a small amount of leaking is completely normal and to be expected, occasionally you may experience some major leaking issues. If this occurs, disassemble your vape pen and wipe all the e liquid off of it; make sure to get the top of the battery where the tank connects, if too much e liquid gets in there or it's left for too long, the EVOD battery can be damaged possibly beyond use. Before reassembling try to think about what caused it to happen in the first place, ask yourself questions like was your tank over/under tightened, are you traveling into a major altitude change, was it left in too warm of an environment, ETC.. With the power of deduction you should be able to figure out why it happened and from there you can reassemble your vape pen and hopefully prevent it from occurring again right away.
What is the EVOD vape pen?
The made-in-China EVOD vape pen is considered the most popular electronic cigarette in the USA. EVOD is considered among the pioneers in the vape business. The products are admired for their quality and a handy kit that comes along with the pen.
Where is the evod pen made?
The made-in-China EVOD vape pen is considered the most popular electronic cigarette in the USA. EVOD is considered among the pioneers in the vape business. The products are admired for their quality and a handy kit that comes along with the pen.
How long does an EVOD battery last?
The power battery provides enough power to last six hours for a moderate vaper which is a relatively long time owing to its high battery capacity. The EVOD vape pen has two backup batteries that come with the package kit.
What is China EVOD?
The vape pen design approach makes it look appealing to every user. The China EVOD pens are made to last longer by the use of metal in their design. While cutting on the price of their vape pen products, China EVOD has managed to dominate the vaping industry and stay ahead of the competition.
How many colors does a vape pen come in?
The pen’s exterior has a matte finish that cuts down on the fingerprints and smudges when being used. Therefore, the vape pen comes in six various colors, allowing users to pick a product that best suits their personality.
How much does a vape pen cost?
The power system ensures that the user enjoys vaping even in remote locations without worrying about a power plug-in source. For a price of $30 the pen provides a high-quality vaping experience befitting the cost.
How long does it take for a vape battery to charge?
Each battery takes four hours to charge fully. With the backup batteries, the user conveniently enjoys an all-day vaping experience without worrying about power breakdown.
How much liquid can you vape with a evod pen?
EVOD Vape Pen is exceptional here, with an E-Liquid tank capacity of 2.5ml. This capacity is able to serve you for a while before stopping to refill it.
What voltage is a evod vape pen?
The voltages can be varied as 3.3V, 3.8V, 4.3V, or 4.8V. This allows you to vape from herb to wax tank or butter to crumble extracts.
Why does my evod vape pen malfunction?
After some time of use, your EVOD Vape Pen may develop some malfunctions that may be caused by the atomizer coil. To replace the coil;
What is the battery in an evod pen?
As earlier stated, EVOD Vape Pen is powered by a 900mah Lithium-ion battery which is rechargeable using a USB charger. The batter is 510-threaded, thus compatible with EVOD Vape Pen and other standard vaping kits.
What is an evod pen?
What is EVOD Vape Pen? EVOD Vape Pen is a slim and sleek vape pen developed and sold by EVOD. It is powered by a Lithium-ion 900mAh battery that is able to power it for a long time allowing you to vape for a long time before stopping to recharge.
Why is my EVOD vape not charging?
It is not charging; then it may be because the battery is not turned ON. Make sure you turn it ON by pressing the power button five times in close succession.
How to make puffs with evod?
Fill the tank with your favorite e-liquid. Make sure that the liquid does not overfill to avoid leakages. Flip the battery that you had removed earlier by lining it up with the coil. Turn on your EVOD Vape Pen, set the mouthpiece on your lips, and start making puffs.
How to remove a vape pen?
The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place.
How to fix a vape pen that won't work?
Replace the heating element if the pen still doesn’t work. Your first option is taking the pen to a professional vape shop. Sometimes an experienced professional can find a way to repair it. If not, either get a replacement pen or purchase a new heating coil. Having a professional repair an old pen is often cheaper than replacing parts, and getting a new heating element can spare you from the cost of buying a whole new pen.
Why does my vape pen stop working?
Wire issues are a common reason good vape pens stop working. Before tossing your pen, try a few simple repairs. First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil’s positioning in the chamber.
How to find battery in a pen?
Take apart the pen to look inside the heating chamber. Unscrew the mouthpiece from the pen again. Continue removing pieces until you are able to see the wire coil inside the heating chamber. It will be right above the lowest section, which contains the battery.
How to get rid of metal wires?
Use a magnet to remove metal wire fragments. This can happen when you install your own wires. Get a small magnet from a home improvement center or hardware store. Move the magnet around the heating chamber and coil to attract any loose fragments that could be causing a short. Peel them off the magnet, throw them away, then test your pen.
What happens if a pen doesn't work?
If it doesn’t work, the pen may need more cleaning or the wire may be out of place.
How to replace heating element in pen?
Usually the replacement is a whole new heating element, so all you have to do is unscrew the old one and affix the new one by hand.
How to tear apart a vape atomizer?
To tear apart the vape tank and vape atomizer, you'll have to attempt to unscrew the vape tank. Usually, there need to be a few other steps included to fully unscrew the vape tank. First, after unscrewing as much as possible, of course - make sure there's no e-liquid left in the tank.
What is the battery of a vape?
Of course, the vape battery is an absolutely critical component of your device. This is what gives your device the power to be able to heat up e-liquid to turn into vapor. This is what allows your vaping sessions ...
Can you clean a vape mod?
Even though vape mods are designed with customizability in mind, cleaning them can still be a chore. From the many already built-in parts to the extra technology you add, the little nooks and crannies of your box mod that you need to take care of add up quickly. Fortunately, there are some good tips and ideas that will help you properly disassemble ...
Can you disassemble a vape mod?
Though these are not the only parts you can disassemble and reassemble in your vape mod, the sections mentioned above are areas that are generally forgotten or need to be regularly maintained. If you keep up with maintenance and cleaning, your vape and your vaping sessions will thank you. You'll be rewarded with amazing-tasting vapor and huge clouds for as long as your vape kit stays functional.
1. A Solid Battery Capacity
One of the things consumers love about the Steam Cloud Evod Vape Pen is its decent battery capacity. Sure, 900mAh is not going to win the Evod any major awards but it is enough to get you through the day without having to constantly search for a power outlet every time you use your battery.
2. Portable Design
Next is its portable design. The Steam Cloud Evod Vape Pen is made to mimic the dimensions of a regular office pen so having to carry it around town will not be a problem. Its size makes it easy for anyone to put it in their bag, their purse, inside their pocket, and even carry it at the palm of their hands.
3. Reliable Build
The Steam Cloud Evod Vape Pen was made with longevity in mind. Instead of using cheap raw materials to cut costs, the manufacturer of this vape pen opted to invest in durable components to ensure that the final product they offer their customers is reliable and dependable.
4. Customizable Temperature Settings
The Steam Cloud Evod Vape Pen has four preset temperature settings that allow its owners to change the level of heat produced by the atomizer. The preset temperature profiles are 3.3V, 3.8V, 4.3V, 4.8V and can provide you with a range of thin wisps of clouds with high flavor retention or large plumes of vapor with an increased level of potency.
5. Ease of Use While Vaping
Unlike other vape pens in the segment, the Steam Cloud Evod Vape Pen is fairly easy to use. Just click the power button five times rapidly and the device will power on. Pressing and holding the same power button activates the attached heating element. To adjust the temperature setting, simply twist the dial located at the bottom of the battery.
6. Versatile Portable Vape
The Steam Cloud Evod Vape Pen belongs to a group of versatile Steam Cloud devices that can be used with a wide variety of materials. It can vaporize herbs, wax concentrates, and even oils.
7. An Affordable Option
This device is arguably a more affordable option compared to most vaporizers on the market that offer the safe features as the Steam Cloud Evod Vape Pen. You will be hard-pressed to find a device that has this many functions with such a user-friendly design that costs only below $20.00.
Why do I flip my vape pen upside down?
I'd recommend to flip the vape pen upside down for the duration of the trip when you're not using it, this keeps the e liquid from being pulled down through the atomizer and out of the bottom of the tank.
What is an evod vape?
The EVOD provides a similar experience to what we are used to with combustible cigarettes. The vapor production is slight, not over powering and won't choke you out, so it's easy vaping for beginners. These kinds of e cigarette starter kits are generally some of the most simple and easy to use as they only have one button to turn on/off and the same button is used to power the EVOD battery. In this article we are going to get you a little more familiarized with your Kangertech EVOD.
How to change atomizer on Kangertech evod?
In order to change out your atomizer you first need to take the tank off of the Kangertech EVOD battery. Once you have the tank separated, remove the base of the tank to reveal the atomizer, if you have e liquid inside your tank you might want to do this with the tank upside down to prevent the e liquid from getting spilled. Now that your base is separated from the tank, grip onto and unscrew the atomizer. If you are unsure as to what the atomizer is, it is the small cylindrical metal tube sticking straight up from the base, you may want to review the other article on here titled, What is Vaping?: E Cigarette Vaping Basic's. With your atomizer removed you can now prime your new atomizer and reassemble your vape pen.
How to fill up a vape tank?
In order to fill up your vape tank, you need to take it off of the EVOD battery and remove the base of the tank. If you already have a little e liquid inside, you might want to do this upside down so that the remaining e liquid doesn't spill out and make a mess. Now that you have the base of the tank off, turn the tank upside down, ...
How to remove battery from EVOD?
In order to take the tank off of the battery, you first need to grip the silver ring under the colored part and glass windows with a finger and thumb, while holding the battery firmly in the other hand. (If you have an all silver kit, you should be able to see a line where the base separates under the glass windows of the tank.) After giving a little twist to the silver ring, the tank should start to unscrew and come off of the battery. Now to take the tank off of the base, you need to grip the same silver ring you did before, again with a finger and a thumb while this time holding the rest of the tank gently, but firmly, in the other hand. Then give the silver ring a little twist and it should start to unscrew from the rest of the tank, now you can see that the silver ring is the base of your tank.
What coils are used for EVOD tanks?
Kangertech SOCC Coils for the EVOD Tank.
Why does my vape pen leak?
Over priming and certain environmental elements can cause your atomizer to flood or your tank to leak. Elevation changes, extreme warmth or cold and over/under tightening are all instances that can cause these issues. Although a small amount of leaking is completely normal and to be expected, occasionally you may experience some major leaking issues. If this occurs, disassemble your vape pen and wipe all the e liquid off of it; make sure to get the top of the battery where the tank connects, if too much e liquid gets in there or it's left for too long, the EVOD battery can be damaged possibly beyond use. Before reassembling try to think about what caused it to happen in the first place, ask yourself questions like was your tank over/under tightened, are you traveling into a major altitude change, was it left in too warm of an environment, ETC.. With the power of deduction you should be able to figure out why it happened and from there you can reassemble your vape pen and hopefully prevent it from occurring again right away.