how to stop vape from burning

^{The best ways to stop your coil from burning are:}

• Prime your coils
• Stop chain vaping
• Reduce power settings
• Keep your vape tank topped up
• Use an e-liquid with more PG
• Try an e-liquid with less sweetener
• Use temperature control
• Use smart mode
• Use auto-priming technology

Full Answer

How to stop vape coils from burning?

The best ways to stop your coil from burning are: 1 Prime your coils 2 Stop chain vaping 3 Reduce power settings 4 Keep your vape tank topped up 5 Use an e-liquid with more PG 6 Try an e-liquid with less sweetener 7 Use temperature control 8 Use smart mode 9 Use auto-priming technology

How long should you leave your vape on before it burns out?

Before burning out, you could also find that it impacts the quality of the vapour production you’re getting. You can comfortably vape for a few minutes and shouldn’t suffer a dry hit, but once you’re done, leave your device for a short while and give your wick time to re-soak.

How do I Stop my vape from dying?

The solution is to just reduce your power setting. If you notice the flavour dying out, then your coil is probably getting dry and needs time to soak up juice. You’ll need to have a break (as above) when this happens, but to make it less likely to happen again, just reduce your wattage a little bit.

Why does my vape smell burnt?

Without liquid to vaporize, the coils start burning the wick, and the user essentially inhales burnt cotton. Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast.

How do I get my vape to stop tasting burnt?

Keep Your Vape Tank Filled The most common reason wicks get burnt is that there isn't enough vape juice in your vape tank. Regularly filling the tank before it starts to get empty is the easiest, most straightforward strategy to keeping your wick protected and avoiding burnt hits.

Why does my vape burn when I hit?

It tastes burnt because the wick inside your atomizer coil has dried out and burned up when it was heated. The wick is the part of your vaporizer that soaks up the eliquid from the tank. The wick holds onto this eliquid before it is turned into vapor when the coil heats up.

Is vape supposed to burn your throat?

Though it is very safe for consumption, it is known to cause some throat irritation when used in high concentration. To avoid a burning throat feeling when vaping, use an e-liquid with a lower PG and a higher Vegetable Glycerin (VG) content.

Why is my coil burning after 1 day?

That burnt taste can occur if there's not enough e-liquid on the wick inside your atomizer coil. The wick is the part of your device that soaks up the e-liquid, which is then turned into vapour when the coil heats up.

Hang On, How Do You Tell If Your Coil Is Burnt out?

If your coil is truly burnt out, you will know about it – the taste of Meche Brûlée is truly unmistakable!If your coil is only slightly burnt, you...

So How Can We Stop Our Coils from Burning out?

Well, from the above, it’s clear that the key thing we need to ensure is that there’s always juice in the wick when we vape.This means you shouldn’...

7 Ways to Stop Your Coil from Burning

If you don’t “prime” your coils before you start vaping, you can burn your coil before you’ve even gotten any use of out of it.When you first insta...

Saving Your Money and Your Tastebuds

Although it seems like a lot of things to keep track of, this is definitely an area where it’s worth going to some effort to protect your coils. Ev...

How to keep vape wick from drying up?

Always stay inside the recommended wattage ranges. Chain vaping. When taking many puffs in a row, the wick will dry up fast. If you sense that a burnt hit is coming, by noticing a slightly roasted taste, put your vape down for a moment. This will allow liquid to cover the dry spots of the wick.

How to make a vape mod faster?

Assemble your tank and fill it with ejuice. Screw your tank on your mod and set aside for 10 minutes. Inhaling on the tip of the tank without firing will speed up the process. For vape mods with wattage adjustment, start from lowest recommended wattage and raise gradually until you find your sweet spot.

How long does a coil last?

Consumption. A coil is generally good for up to a certain amount of e-juice. The more you use it, the faster it dies. Coil life is sometimes calculated in days or weeks, but the most accurate way to calculate it is in mL—some people vape only a couple of mL per day, while others will consume 10-20 mL or more.

How to know when your coil is done?

Knowing when your coil is done is not a science, but it is a learning process. The more you use a vape tank, the more aware you become of the time you need to grab a new coil out of the box. The first sign will usually be a loss of flavor, followed by a drop in vapor production.

How to start vaping on a pod?

When you first begin vaping on a pod, try and take shorter puffs to begin with. Some of the smaller coils need to be broken in a bit before being pushed. If you take really long hits to start, even if the wick is fully saturated, you could get a burnt hit.

How to prime a vape tank?

How to prime vape tank coils. All vape tanks that come with replaceable coil heads have more or less the same structure and require the same simple steps to get primed. You will need to repeat this process every time you replace a coil. Take a new coil out of the box.

Why does my e-liquid burn?

Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. High wattages. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there’s still some juice there.

Intro

Nothing is worse than looking forward to a tasty mouthful of vapor only to be met with a nasty, burnt flavor meeting your taste buds. A vape that tastes burnt can ruin a vape session and can be infuriating to fix.

Burnt Hits vs. Dry Hits

Before determining why your vape creates a burnt flavor, you need to determine that what you're experiencing is a burnt hit. Dry hits are often confused with burnt hits, but they are very different experiences that have very different solutions.

Why Does Your Vape Taste Burnt?

When you start getting burnt hits, you'll know immediately. The vapor will taste scorched and harsh, and you may experience discomfort or pain in your throat and lungs. What causes a burnt vape will vary, but it's likely related to your wick.

What's the Best Way to Prevent Burnt Hits?

Now that we know what causes burnt hits, it's time to learn how to prevent them in the first place. Remember, your primary goal is to keep the wick from burning, and there are several ways to do so.

Other Ways to Avoid Burnt Hits

There are a variety of different ways to avoid burnt hits, depending on your vaping device. While less common, the following techniques could help prevent getting the occasional nasty burnt hit.

How Can We Stop Our Coils From Burning Out?

Unfortunately, all coils will eventually burn out. Though you can't stave off the certainty of entropy, there are a few steps you can follow to stretch the life of your coils as much as possible. Remember, you need to regularly replace your coils (or eventually replace your vape tank) regardless of whether you follow these steps!

Refill Regularly

As we have mentioned, the absolute best thing you can do to avoid getting burnt hits is to regularly refill your vape juice tank. Many tanks are designed specifically for easy refilling, which may be attractive if you hate the idea of having to periodically clean up vape juice messes.

How to burn coils before vaping?

If you don’t “prime” your coils before you start vaping, you can burn your coil before you’ve even gotten any use of out of it. When you first install a new coil, the wick has to go from being completely dry to completely soaked.

How to stop coils from burning?

The best ways to stop your coil from burning are:#N#1.Prime your coils#N#2.Stop chain vaping#N#3.Reduce power settings#N#4.Keep your vape tank topped up#N#5.Use an e-liquid with more PG#N#6.Try an e-liquid with less sweetener#N#Let’s all explore all these in more detail!

How to prime a coil?

To prime the coil, add a few drops of e-juice to the opening in the top (around 3 to 5 is enough) and then soak the exposed wick at the ports around the side.

Why is my coil head not soaking up?

On many coil heads, the juice has to be at a certain level to even reach the wicking ports. When less of the juice is in contact with the wick, it doesn’t get soaked up as quickly. When your juice level is really low, this can cause problems very easily. The simplest solution to this is to keep your tank topped up.

How does a fire button work?

When you hit the fire button, electricity flows through your coil and it gets hot. The heat given off by the coil is taken up by the e-juice, which is soaked into the wick, and it turns the juice into vapour.

How long does it take for a wick to dry out?

If you do this, though, you have to leave it for 24 hours (or longer) to completely dry out before you use it again.

What happens when you vaporize a wick?

When the juice in the wick has been vaporised, the wick dries out a little. However, you have a tank full of e-juice surrounding the coil, and this is constantly replacing the juice in the wick. This means that by the time you go to take another puff, the wick is soaked again and everything works as it should.

Can sweeteners shorten the life of a vape coil?

While added sweeteners can do wonders for replicating the flavour of our favourite fruits and baked goods, they do noticeably shorten the life of your coil, especially in larger quantities. As you vape, the sweetener in the e-liquid may leave residue on the coil.

Do coils last longer?

However, there are some ways to avoid dry hits for good and make your co ils last longer.

Does e-liquid have sweetener?

Many e-liquids even contain no sweetener to extend coil lifespan. The best way to find an e-liquid with low sweetener is to ask for advice at your local vape store, or online communities of vapers, who are always happy to help beginners.

How does high wattage vape work?

High wattages allow you to burn through e-juice at twice the speed. It may offer bigger and better clouds, but at the cost of longevity - your vape sessions won't last as long. Once the e-juice runs out the wick will dry and result in a dry hit. It may not be popular with the cloud chasers, but if you want a longer vape sesh and want to cut down the risk of burning your vape coil, turning down the wattage is the way to.

Why do vape coils have cotton?

Most vape coils are made with cotton because it's perfect for soaking up e-juice and holds it really well while still allowing air to be drawn through. However, if you haven't vaped for a while or you're just switching to a new liquid or coil, the cotton can be extremely dry. By soaking the wick in e-juice before you start vaping, you'll eliminate any risk of that dreaded 'dry hit' This is as true for those using traditional cartomizers as it is for those with newer mods. The trick is let your e-juice sit in the tank for a good 5-10 minutes at least before you take your first hit.

Why is it important to use high VG juice?

This is particularly important when using a high VG juice because it takes these longer to soak into your coil in between each drag.

Can you mix PG and VG in e-juice?

Typically, you'll see a mixture of PG and VG in any kind of e-juice. The higher the VG content, the thicker the liquid and the longer it takes to soak the coil between draws. That means that if you like vaping quickly you might burn out your coil quicker with a high VG liquid.

Why does my vape tank burn out?

Without saturating your wick, typically made from natural organic cotton material in e-liquid, your coil will overheat and potentially burn out. Another dilemma is having too much cotton wrapped around the coil. This means you will have to top up your vape tank more frequently to ensure all of the wick is saturated all the time. A greater surface means more time waiting in between vapes to allow optimum prime levels.

What does it mean when your vape coil is burning?

Like clockwork, one leads to the other. Any seasoned vaper will have no doubt experienced the dreaded burning taste when vaping, more commonly known as a ‘dry hit' or ‘dry burning’. This happens when your coil has burnt out and to prevent this from happening, you need to understand the scenarios that can lead to a coil burning out quickly.

How does a chain vape work?

Every time you vape, the heat from the coil is transferred into the e-liquid and soaked onto the wick, turning it into vapour. The longer you chain vape, the less time the e-liquid in your tank has to soak into the wick again.

How to keep vape coils in good order?

With a pair of tweezers, pinch it lightly to spread heat across the component evenly. In turn, it will heat more of the coil and not overheat certain areas leading to ‘hotspots’, which can cause that burnt taste.

What happens if you run your e-liquid too low?

Running Your E-Liquid Too Low. If you’re not keeping your tank topped up, the wick may not be able to draw enough e-liquid from it to soak. Initially, each vape will have less vapour production and begin to lose its flavour. That’s a telling sign that it needs to top up or you’ll receive ‘dry hits’.

What happens if you use a higher coil?

This ensures that you get the best vaping experience. If you power your device higher than your coil allows, and the device doesn’t prevent it from being used in this way, you’ll be vaping more e-liquid than the wick can soak up.

Can you vape for a few minutes?

Before burning out, you could also find that it impacts the quality of the vapour production you’re getting. You can comfortably vape for a few minutes and shouldn’t suffer a dry hit, but once you’re done, leave your device for a short while and give your wick time to re-soak. As they say, patience is a virtue.

What is an atomiser coil?

An atomiser coil does a similar thing to a clearomizer which you may have found in a basic starter kit. Clearomizers are disposable tanks and vape coils all in one, so when you use a device with an atomiser coil you only replace the coil and not the tank every time it burns out. Much more cost-effective.

How do you stop your coil from burning out?

A burnt coil happens to us all at some point. Taking a puff on a coil that is burnt and desperately needs changing feels like you’ve swallowed a cheese grater and it tastes and smells pretty nasty too.

How do you prime your coil to help prevent it from burning?

Remove the old coil and replace with the new one. We suggest that you prime the atomiser coil while it is attached to the device or it can get pretty messy with juice leaking onto your hands.

What coils are there and which should I buy?

If you are just wanting to try vaping before you fully invest then you might look at getting a disposable atomiser. This is usually included in a very basic starter kit. The negative to this is in the name, it is disposable.

Can you clean your vape coils to make them last longer?

Yes, you certainly can! Coils aren’t expensive to replace, however, if you are away and in need of a coil ASAP, or if you are just trying to cut down on your spending then it might be a good idea to know how to clean your coils.

Why clean vape coils?

Cleaning your vape coils could well get an extra week or two out of them. A coil that is gunked up is going to reduce the flavour and vapour production, it can even make your vape taste burnt.

David Mason

I'm the founder of Vape and Juice and the face behind Vape and Juice TV on Youtube. When I'm not stealing Heisenberg from the warehouse, I give retail advice on Deathground's Retail Podcast and the Vape News related Cotton and Kanthal Show, on Spotify and Apple. I began vaping in 2009 and have been involved in the industry since 2013.

1. Change to a lower strength e-liquid

Speaking as a bonafide nicotine junky, I know the appeal of high strength vape juice. But, as much as we love those strong hits, it might be the high nicotine content that’s responsible for our sore throat.

4. Pay attention to how much you are vaping

I don’t know about you but I’m definitely guilty when it comes to binge vaping. Sometimes, while working or watching a movie, we do it unthinkingly⁠—and excessively!

5. Change your vaping style

If you’re new to vaping you may only be accustomed to one style of vaping. Speaking as a die-in-the-wool MTL user, there’s nothing inherently wrong with this. However, there is a possibility your chosen method of vaping may be the cause of that pesky sore throat.

6. Change the flavour of your e-liquid

Sometimes, even when we change the PG/VG ratio, or lower the nicotine content, we still end up with a sore throat. Believe it or not, it might actually be the flavour of your vape juice that’s the problem.

7. Try different coils for your device

Vape coils can be a cause of a sore or burning throat that often slips under the radar. But it’s actually more common than you think for people to be allergic to the nickel that’s found in some coils.

Conclusion

I know that sniffing out the cause of your sore throat can make you feel like an overworked detective—but have faith! If you follow all the steps listed above you’ll be sure to catch the culprit, and those hits will be silky smooth again in no time! We sincerely hope you learned how to prevent a sore/burning throat from vaping by reading this guide..