Attach your pod or tank to the body of the device and you are all set up and ready to go! To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing. That's it you're done!!
How do I Fill my kangertech nebox with ejuice?
Once you have completely soaked your coil with ejuice, move onto filling your tank. Tilt the KangerTech NEBOX Box Mod to ensure you will not fill any juice down the center tube (this is where you inhale from).
Should I upgrade to the kangertech subox mini vape pen?
If you are currently using the classic eGo-T Vape Pen or the Kangertech EVOD vape pen, this will be a noticeable upgrade that is easy to use but will provide a much better vaping experience. The Kangertech SUBOX Mini is a step up from the KangerTech Topbox NanoStarter Kit due to the noticeably larger tank and higher quality design.
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
What is the kangertech nebox box mod?
As opposed to other mechanical mods and regulated mods, the KangerTech NEBOX Box Mod is an all in one design which means the tank is actually in the body and housing of the unit. There is no RBA (Rebuildable Atomizer Coil/ Tank); however, there is a RBA deck which you can use to rebuild coils.
How do I get my Kangertech to work?
0:251:21Turning on a Kangertech Battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you get your kit charge your battery. And then. I turn it on and now that's ready to go. SoMoreSo when you get your kit charge your battery. And then. I turn it on and now that's ready to go. So we'll just try it out. And all good so that's how you turn on a kangertech battery.
How do I reset my Kangertech vape?
Remove the battery and hold down all 3 buttons simultaneously while re inserting the battery. It should show 'Kangertech' as you turn it on if you did it right. This will fix the 9.9ohm reading and the E1 error message.
How do I use Kangertech?
To turn ON / OFF press the fire button 5 time in 2 seconds. Squeeze the plastic bottle (Squonking) to get your desired amount of liquid into the tank, press the fire button and vape. If the button is pressed for more than 10 seconds the unit will automatically shut down. Release the button and fire again to reactivate.
How do I change the watts on my Kangertech?
5:4413:38Kangertech KBOX 200w (Watt) Temp Control Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo standard can't fall coil in here the screen is oriented this direction but if you want it theMoreSo standard can't fall coil in here the screen is oriented this direction but if you want it the other way you can just hold these two buttons down. And it flips over to the other side flip it. Back.
Why is my vape pen not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Are KangerTech Vapes good?
KANGERTECH VAPORIZERS Surprisingly high-quality products hailing from China have made an imprint on the world's vaping industry, as KangerTech has become known as a reliable brand with some of the best vaporizers on the market.
How do I activate my EVOD?
The Tube in the center of the Liquid Body leads straight into the mouthpiece. Next, just turn on the EVOD Vaporizer, hold down the silver button, and put the mouthpiece to your mouth and pull. Your vaporizer should be working now and vaping should come easily.
Why is my Kangertech EVOD blinking?
When the Kanger Evod battery power is low, the LED will flash approximately 15 times when the button is pressed to indicate that the battery needs to be charged. The Kanger Evod battery can be charged by removing the attached clearomiser/atomiser, which then exposes the thread on the end of the battery.
How do I reset my EVOD vape pen?
Make sure it is turned on: If you are having issues charging your ego or evod battery, the first thing you want to do is make sure it is turned on. To do this press the power button 5 times in a row. You will want to press the button 5 times rapidly, in a rhythmic flow.
What wattage is Kangertech Subvod?
Voltage output of the battery is fixed at 3.7V, so this outputs 3.7V regardless of whether the battery is fully charged or near empty. The Subvod battery is recharged via a micro USB cable, the micro USB charging slot is found at the bottom of the battery and a micro USB cable is included in the kit.
How many watts is a Kangertech Subvod?
The wattage can be adjusted across a spectrum ranging from 35 watts to 40 watts and it has an absolute minimum resistance of just 0.1 ohm. Between all of the variables that you can adjust, this versatile vaping instrument is more than capable of producing the vapor that you're after – be it thick or thin.
What is Subox mini starter kit?
The SUBOX Mini Starter Kit is the perfect starter kit for vapers looking for a sub-ohm and cloud producing experience without destroying your wallet. The SUBOX Mini Starter features the super popular Subtank Mini with the new KBOX Mini which can fire up to 50 watts!
KangerTech NEBOX – Box Mod Setting Up, Filling Tank and Overview
This is an overview of the KangerTech NEBOX and Instruction Guide for setting up, using and getting started. Setting up the KangerTech NEBOX Box Mod is fairly simple and we will show you how easy this mod is to use.
Step 1 – Unscrew the Tank Housing with the Provided Key (Quarters and Nickles work as well)
First you want to unscrew the main tank component which holds your coils. Weather you are using the RBA deck to re-build your coils or using the coils that KangeTech provides, this section will hold and house your coils. This component can be unscrewed with your fingers; however, using the provided key or a quarter will be a little easier.
Step 3 – Tilt the body of the NEBOX Box Mod and slowly fill the large 10ml volume tank
Once you have completely soaked your coil with ejuice, move onto filling your tank. Tilt the KangerTech NEBOX Box Mod to ensure you will not fill any juice down the center tube (this is where you inhale from).
Step 4 – Screw on the SSOCC Coil and Housing unit back onto the body of the NEBOX Bod Mod
After you have reached the level you are comfortable vaping with, screw back on the coil component and tighten it down with the provided key or a quarter. CAUTION: do not over tighten.
Step 5 – Unscrew the IMR Battery housing with the provided key (Quarters and Nickles work as well)
After you finish screwing on your tank and coil section, start by wiping down the NEBOX Mod if you have spilled any ejuice. This will prevent from any ejuice leaking into you IMR battery section. Unscrew the IMR battery section with the provided key.
Step 8 – Screw on the IMR Battery component with provided key
Here is where things can get a little tricky. For some reason, it is somewhat of a pain to screw on the IMR battery cap while there is a battery in the unit. If you find that this is happening to you, be patient, THIS IS NORMAL. You have to get the threads just right in order for the IMR battery cap to go one effortless.
Step 9 – Adjusting temperature controls with the NEBOX Box Mod
There are many controls on the KangerTech NEBOX Box Mod. We will list them out for you so you can understand what you are doing and what all the settings mean.
What is a Kangertech Subox Mini?
Well, let me put it lightly, the Kangertech SUBOX Mini starter kit (Kanger KBOX Mini) is a must own box mod for ALL vapers! Easy to use, yet extremely powerful, the Kangertech SUBOX Mini box mod packs a serious punch with a smooth warm vapor. This box mod has the ability to switch between the replacement OCC (organic cotton coils) and the Kanger RBA deck for the advanced users. This kangertech subox mini review and overview is more of a tutorial on the kangertech subox mini, more than an in depth review on vapor production and internal components of the device. Many people love this device for the kangertech subox mini OCC coils and the subox mini battery which uses a 18650 IMR Battery. Check out the Model-C Version
How to use OCC coil?
You want to start by soaking the OCC coil in both exposed air holes to allow ejuice to completely soak into the cotton. Take an ejuice dropper to drop a single drip of ejuice in both holes, one at a time, letting each single drop completely soaking in before another drop is made. Once you have multiple drips on both sides of the OCC coil, you want to make sure the ejuice is completely soaked into the cotton before the next step.
How much ejuice to soak a cotton tank?
What you want to do is take one drop at a time on the edge of the center tube to soak the cotton. You will only need about 2-3 drops of ejuice to completely soak the center cotton.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
