- First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes ...
- Once your device is unlocked, press the main fire button three times to access the device menu. Your menu may vary slightly depending on your model, ...
- After you’ve enjoyed a good vape session, turn off your SMOK device by accessing the menu system again. Scroll through your options until you reach ...
Full Answer
How to change coil on Smok?
Jun 14, 2018 · Turning on Your SMOK Vape First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just... Once your device is unlocked, press the main fire button three times to access the device menu. Your menu may vary... After you’ve enjoyed a good vape ...
How to turn on kangertech vape?
May 10, 2019 · A hands on demonstration showing you how to set up your Smoktech Morph 219 mod, prime your coils and fill up the tank.If you are new to sub-ohm vaping or vap...
How to get more smoke out of a vape?
1. Please take off the tank and click the fire button, and then place that tank back on, click "n" when it asks "is it a new coil". 2. Please make sure screws are tight on the tank if you use the RBA coil on your mod. 3. Please try with other tanks or coils on your mod, and try the same tank on the other mods to check whether they work fine. 4.
How to unlock power lock on Smok vape?
Feb 20, 2018 · How to set up a Vape. Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. Step 2 - Fill your tank or pod with e-liquid. Step 3 - Prime your coil / pod. Step 4 - Settings or no Settings? Step 5 - Set the correct output power.
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
First Things First: Charge Up The SMOK Nord
This is important. Your SMOK Nord might power-up, but it’s been sat in its box for weeks, maybe months at a time, so you’ll want to give it a good 60 minute charge before using it for the first time.
How To Prime SMOK Nord Coils (And You Need To Do This)
This one is SUPER important. You have to prime the SMOK Nord’s coils before using them. Failure to do so may lead to burning them out prematurely – and nobody wants that.
Stopping Dry Hits On The SMOK Nord
Once you’ve primed the SMOK Nord coil, insert it into the top cap. Make sure the white line on the bottom of it is pointing at the front and back of the device (not to the sides). This ensures your coil is installed properly and will wick correctly.
How To Check SMOK Nord Battery Life
The SMOK Nord has a fire key. It’s handy for tactile firing and, generally speaking, I prefer this style to breath-activated pod mods.
Anything Else I Need To Know?
Nope, that’s literally it! As I said earlier, the SMOK Nord is a fantastic device that is super-simple to use. It has a kick-ass battery life, especially when used with its MTL coils, and the flavor is great (with both styles of coils).
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
How to install a coil on a Pod?
To install a coil, pull the pod from the device, turn it upside down, and on the bottom, there is a coil slot to simply push the coil in. The pod has a plug-n-play coil design that makes the process really easy and convenient. To remove the coil, pull the coil head up from the bottom of the pod.
How to fill a pod with liquid?
Filling The Pod: Before you insert the pod back onto the device, you will need to fill the pod with e-liquid since it has a side-fill silicone plug design . Locate the silicone plug located on the side of the pod, then pull open the plug, and lastly, pour e-liquid into the fill hole.
How to get cotton out of a wicking pod?
With the pod not in the device, simply locate the bottom of the pod , pull the coil out , then apply a couple of drops onto the wicking slots , ensuring that the cotton is saturated before you ever use it. Once the cotton looks like it is soaked enough, push the coil back into the bottom of the pod all the way.
Getting the Smok X Priv Set Up
Once you’ve unpacked your Smok X Priv box and read the instruction and safety manuals, you’ll be able to get set up. Ensure the device is fully charged and fill your tank with your favourite e-liquid before switching your device on.
Wattage Settings and Coils
Your pre-installed coil will be the V12 prince-Q4 Coil. While it’s suitable to be selected at between 40 and 100 watts, you’ll achieve the best results by setting you wattage between 60 and 80 watts. Using quadruple coils allows the Q4 to produce a resistance of 0.4 ohms, which provide a deep, rich vapour cloud as well as the flavours to match.
Memory Mode
We vapers vary in our tastes. What you may like with certainty, your fellow vaper may sneer at condescendingly. We’re all different and we all have different needs that suit our needs.
Setting Your Puff Count
Want to limit your vaping? Fancy knowing how many puffs you’ve had? Via the menu screen, opt for the puff count page and really take control of your vaping.
Screen Colour Settings
Want your vape pen to match your outfit or favourite sports team? To truly personalise your Smok experience access the menu screen and you’ll find the ability to change the colour settings of the screen – it's the little things in life, isn't it?
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
Why do you let your tank sit?
By letting your tank sit you are making sure the cotton is truly soaked with e-liquid to prevent a dry hit and potentially burning the coil. Prime your coil: A popular method for helping the e-liquid soak through is priming. This gives you extra reassurance that you won't get that nasty dry hit.
What coils are used in power mode?
Pretty much all coils need to use with this mode, you can use Kanthal, stainless steel (SS), and nichrome ( nickel -chrome) coils. most of readily made coils are made out of Kanthal Wire, which is why power mode tends to be oh-so-popular among users of different expertise levels.
What is power mode?
Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.
Can you set a temperature control?
You can set personalized power or temperature control settings for your convenience. On select devices, if you have a few different power or temperature settings that you normally use, you can set these as memory settings to you can easily scroll through them to change from one setting to another.
