Getting The Smok X Priv Set Up Once you’ve unpacked your Smok X Priv box and read the instruction and safety manuals, you’ll be able to get set up. Ensure the device is fully charged and fill your tank with your favourite e-liquid before switching your device on. To do this, click the fire button 5 times in succession to switch the SMOK X Priv on.
How do I set up my Smok X Priv?
Once you’ve unpacked your Smok X Priv box and read the instruction and safety manuals, you’ll be able to get set up. Ensure the device is fully charged and fill your tank with your favourite e-liquid before switching your device on.
What is X-Priv vape?
Moreover, it uses TFV12 Prince tank, with powerful V12 Prince cores you can fully enjoy the massive vapor. Powerful function, fancy appearance, X-Priv is here to conquer you! Innovation keeps changing the vaping experience! The max output power of X-Priv is 225W, and there are three modes for you to choose from.
How to turn on the X-Priv?
Indicated in the battery compartment is the direction you should insert the batteries. Both batteries should have the negative side up and the positive side down. How To Turn On The X-Priv: To turn the X-Priv on, simply click the firing bar 5-times consecutively. You will then see the SMOK logo and will immediately be redirected to the main screen.
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
How do you use X priv vape?
4:228:00Smok X-Priv Kit - Review and Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd to do that you'll click the fire button down three times one two three. And then that will allowMoreAnd to do that you'll click the fire button down three times one two three. And then that will allow you to change from different modes.
How do I reset my Smok X priv?
11 Answers. Hold all buttons WITHOUT batteries and plug into a USB port. Keep holding for ten seconds, throw batteries in while still connected, disonnect and reconnect to turn on.
How do you turn on X priv Smok mod?
2:577:40The SMOK X Priv Kit Unboxing and Quick Product Overview - YouTubeYouTubeStart of suggested clipEnd of suggested clipFive clicks of the fire bar will power the device on and the bright HD color screen comes to life onMoreFive clicks of the fire bar will power the device on and the bright HD color screen comes to life on.
How do you set up a Smok vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'llMoreFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'll be using mango buy salt shaker. Once your pot is full pulls the cap push the pod into the device.
Why is my SMOK vape not working?
SMOK Vape Won't Turn On If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
Why is my vape not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
How do you unlock a Smok vape?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do you unlock a vape?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
How do you unlock the power lock on a Smok vape?
3:508:23SMOK NORD 4 - Now with More Power! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape itMoreOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape it. And then if you want to turn it on or off will be five clicks one two three four.
How do you use a vape mod for beginners?
All you need to do is hold the fire button down while you draw vapor from the mouth piece. E-liquid and oil vape tanks will put off vapor almost immediately, while it may take a dry herb or wax atomizer a few seconds to heat up and put off vapor.
How do I change my vape settings?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
Why is my Smok vape blinking 4 times?
Resistance protection: when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms, the LED light will blink 4 times and the battery will automatically shut down the output.
Getting the Smok X Priv Set Up
Once you’ve unpacked your Smok X Priv box and read the instruction and safety manuals, you’ll be able to get set up. Ensure the device is fully charged and fill your tank with your favourite e-liquid before switching your device on.
Wattage Settings and Coils
Your pre-installed coil will be the V12 prince-Q4 Coil. While it’s suitable to be selected at between 40 and 100 watts, you’ll achieve the best results by setting you wattage between 60 and 80 watts. Using quadruple coils allows the Q4 to produce a resistance of 0.4 ohms, which provide a deep, rich vapour cloud as well as the flavours to match.
Memory Mode
We vapers vary in our tastes. What you may like with certainty, your fellow vaper may sneer at condescendingly. We’re all different and we all have different needs that suit our needs.
Setting Your Puff Count
Want to limit your vaping? Fancy knowing how many puffs you’ve had? Via the menu screen, opt for the puff count page and really take control of your vaping.
Screen Colour Settings
Want your vape pen to match your outfit or favourite sports team? To truly personalise your Smok experience access the menu screen and you’ll find the ability to change the colour settings of the screen – it's the little things in life, isn't it?
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
225W OUTPUT
The max output power of X-Priv is 225W, and there are three modes for you to choose from.
EASY- TO- READ MENU
The main menu and sub-menu are easy to read and operate, you can easily manage the vaping data.
MULTIPLE PROTECTIONS
X-Priv provides multiple types of protections to avoid potential risks.
Becky84 Senior Member Verified Member ECF Veteran
Hey everyone. I just fell off the wagon and started smoking again. I vaped about 3 years ago and that’s what got me off them. So I was on the hunt for a quick vape and stopped at my local shop and picked up a mod. X-priv. I’ve messed with all the settings, rebooted, but my voltage always reads zero. What am I doing wrong? How can I fix it?
Baditude ECF Guru ECF Veteran
I'm glad you said that your mod appears to vape just fine. That would have been my first question to you.
Becky84 Senior Member Verified Member ECF Veteran
Thank you for your reply! I figured since everything seems to be in working order I might not have to worry about the voltage. I had to get the no name batteries the shop had. I sadly sold off all my stuff long ago. I attached a picture. I plan to research and order new batteries. I’m not used to sub-ohms but that seems to be the new standard.
sonicbomb Vaping Master Verified Member ECF Veteran
The mod will calculate the correct voltage to supply to the atomizer based on coil resistance and selected wattage. It does this accurately without any input from you, but for some reason they choose to have it on the display. Pointless really, pay it no heed at all.
Baditude ECF Guru ECF Veteran
I agree with Sonic. Those are LG HG2 batteries. An excellent choice for your dual-battery mod and wattage range.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.