
Here’s how to fill the Smok Vape Pen V2 with e-liquid:
- Unscrew the drip tip Anti-Clockwise
- Fill with your desired e-liquid
- Re-fit the drip-tip cap clockwise
- Allow the e-liquid to saturate the coil for around 5-10minutes
Full Answer
How to fill the smok vape pen V2 with e-liquid?
Here’s how to fill the Smok Vape Pen V2 with e-liquid: Allow the e-liquid to saturate the coil for around 5-10minutes There really isn’t much to learn when operating this piece of machinery. How Does the Smok Vape Pen V2 Perform?
How many coils are available for the smok vape pen 22?
These are the five coils available for the SMOK Vape Pen 22. SMOK Vape Pen Mesh Coil (included with kit): 15 ohm; best for direct-to-lung inhaling. SMOK Vape Pen DC Coil: 6 ohm; best for mouth-to-lung inhaling. SMOK Vape Pen 22 Coil: 3 ohm; traditional wound coil. SMOK Vape Pen Coil: 25 ohm; traditional wound coil.
Do I need to read the instruction manual for the smok vape?
Although we recommend reading the printed instruction manual for the SMOK Vape Pen V2 when you receive the device, we also understand that you want to spend your time vaping – not reading – when you get a new vape pen.
What is the max output of vape pen V2?
the 60W max output, 0.15Ω Vape Pen V2 Meshed Coil inside and adjustable airflow system, it is over-whelming to ride into the queue of your favorite devices by virtue of the lengthened endurance, satisfying taste, smooth flavor and customized vapor effect.

How do you set up a Smok V2?
2:106:40SMOK Vape Pen V2 kit presentation - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou screw that into the base. Go then you take your glass tank. You mount that on which will be aMoreYou screw that into the base. Go then you take your glass tank. You mount that on which will be a bit hard to do the first time because everything is dry the o-ring is dry but okay this is what.
How do you install a Smok vape pen V2?
How To Fill the Smok Vape Pen V2Unscrew the drip tip Anti-Clockwise.Fill with your desired e-liquid.Re-fit the drip-tip cap clockwise.Allow the e-liquid to saturate the coil for around 5-10minutes.
How do you use Smok V2?
The Vape Pen V2 automatically operates at the ideal power level for the connected coil. To vape, simply hold the device's button while puffing on the mouthpiece. To lock the device for safety when you aren't using it, press the fire button five times quickly.
How do you set up a Smok vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'llMoreFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'll be using mango buy salt shaker. Once your pot is full pulls the cap push the pod into the device.
How do I turn on Smok v2?
Turning on Your SMOK VapeFirst, locate your device's main fire button, which also functions as the power on/off button. ... Once your device is unlocked, press the main fire button three times to access the device menu. ... After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
Why is my Smok vape not working?
SMOK Vape Won't Turn On If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
How do you smoke a vape pen for the first time?
It's a simple technique.Slowly draw vapor into your mouth for a few seconds.Hold the vapor in your closed mouth for a second or two.Open mouth and breathe in the vapor to your lungs (not a “swallow”)Exhale after vapor is in lungs.
Why is my Smok vape blinking white?
Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output.
How do you set up a vape mod?
0:053:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAn external charger is best step two insert your battery. Make sure to fit them properly. And notMoreAn external charger is best step two insert your battery. Make sure to fit them properly. And not upside. Down look at the positive. And negative signs. Step three check your coil.
How do you assemble a vape?
How to set up a VapeStep 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you.Step 2 - Fill your tank or pod with e-liquid. ... Step 3 - Prime your coil / pod. ... Step 4 - Settings or no Settings? ... Step 5 - Set the correct output power. ... Step 6 - Take your first Vape.
How do you clean a v2 vape pen?
Most of the time, all you'll need to do is wash your vape with some hot water. Fill a large bowl with warm water and detach your tank, getting rid of any residual e-liquid while you do. Take your tank paper and then give them a wash, just like you would your dishes!
How tall is the Smok Vape Pen V2?
The Smok Vape Pen V2 is really no bother to hold and carry. Being only 22mm in diameter and 117mm in height, its very lightweight and nice in the hand. The fire button is also very nicely placed for a very comfortable thumb fire but when using as a finger firer, I find it a little uncomfortable.
How does a coil work on a tank?
The coil screws into the device from the top with the top-section then screwing down onto the coil which then makes the glass seal in position. At the top of the device, or base of the tank – whichever way you like it, is a nice airflow adjustment ring which has a stopper so it does not spin freely.
Does the Smok Vape Pen V2 have a wattage adjustment?
The Smok Vape Pen V2 has no option to adjust the wattage, So I gather there is some magic in this device which will automatically adjust the wattage to the recommended, depending on which coil is installed.
Is the Smok Vape Pen V2 cool?
The Smok Vape Pen V2 is a fairly cool vape until you close the airflow down below half open, at which point you can enjoy a slightly warm vape, but there are some drawbacks to restricting the airflow that much…. See below….
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.

What Can We Expect from The Smok Vape Pen V2?
Inside The Box
- 1 x Vape Pen V2
- 2 x Vape Pen Meshed V2 Coils (0.15)
- 1 x Micro USB Cable
- 1 x User Guide
Specs and Features
- Size: 117.7×22.0x94.5
- Battery: 1600mAh Internal
- E-Liquid Capacity: 3ml (TPD Version 2.0ml)
- Output Wattage: 60w Max
Design and Build Quality
- The 22mm Diameter Tube style kit by Smok is made of a materials I cannot confirm. My guess is aluminium alloy, or perhaps zinc alloy. Nonetheless this is a very simply styled device. I received the Gold colour variant of the Smok Vape Pen V2, and even thought I’m not a big fan of gold kits, I really can’t fault the build quality and finish of this kit. On the face of the device is a large round, …
How Does The Smok Vape Pen V2 Perform?
- I was using a high VG (80VG-20PG) variant of Code Red by Darkstar to really give these coils a bit of work to do. Read more: VG VS PG In E Liquid: All You Need To Know
Pros
- Decent flavour
- Simple and easy to use
- Good build quality
Cons
- Small tank capacity
- A little noisy
- Battery life not the best
- Charges fairly slowly
Final Review Verdict
- As much as the Smok Vape Pen V2 dishes out good flavour, I’m a little disappointed. Now maybe I’m asking too much, maybe its simplicity and minimal features are what people want? But I just feel the device is a little outdated with a Micro USB Port and no wattage adjustment. The tank also has a low e-liquid capacity and is a little ‘Old Skool‘ to fill. But again, if its convenience, portabilit…