Press up and down buttons simultaneously to make adjustment manually. And press fire button shortly time will cause the device go into the next 1-second-adjustment. Then press the fire button for 1.5 seconds to save the setting and go back to the customization mode.
Full Answer
How do I use the vape mod?
After keeping it stand for about five minutes, you are free to usethe device. Slide the button at the top of the mod, enabling you to enjoy a better vaping experience with the innovative variable airflow system. -Puffs in a day: Record the puffs in a day and it will be reset to zero the nextday.
Where to buy the drag 2 vape?
Although the Drag 2 has gained popularity rather quickly and you can buy it nearly anywhere, we recommend you to shop at VaporAuthority.com, an online vapor shop that has gained the respect of the vaping community due to their incredible customer service and a large selection of the industry’s latest and greatest products.
How to turn on the drag 2 mod?
How To Turn On The Drag 2 Mod: To turn on the Drag 2, simply press the fire button 5 times consecutively. To turn the device off, repeat the process. How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode.
How to activate and vape your vape device?
How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode. From there, you can adjust the wattage or rely on the automatically recommended wattage the device provides. Press and hold the fire button and your coil will vaporize the e-liquid.
How do I get my drag vape to work?
0:362:23VOOPOO DRAG S POD KIT Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply pull the pod from the device which is secured via magnetic connection. And either push inMoreSimply pull the pod from the device which is secured via magnetic connection. And either push in your new coil like so or pull out an existing coil which will want interchange.
How do you change drag settings on vape?
Press up and down buttons simultaneously for 1.5 seconds, enter the function menu Interface. Press up button or down button simultaneously to choose the function. Press the fire button to make confirmation and go to next step. You can make the adjustment according to pressing up or down button simultaneously.
How do you use a drag vape?
7:088:50VOOPOO Drag V2!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd temperature all you got to do is hit this fire button 3 times 1 2 3 and see how it's blinkingMoreAnd temperature all you got to do is hit this fire button 3 times 1 2 3 and see how it's blinking you can adjust it from there. And if you want to go back to regular water mode.
How do you set up VooPoo drag 2?
3:199:28VooPoo Drag 2 Kit - Review & Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd one also for your flavor. Now if you press the fire button again 3 times 1 2 3. And then it goesMoreAnd one also for your flavor. Now if you press the fire button again 3 times 1 2 3. And then it goes to your temperature. Control where you can choose what temperature.
Why is my drag vape not working?
The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO DRAG X is shipped in a locked position to prevent accidentally turning on during shipment.
How do I change my drag mini settings?
To adjust wattage while in TC Mode, press fire button 4 times rapidly to activate wattage adjustment. You will see the “W” wattage icon flashing. The wattage can be adjusted from 5W to 80W. stop running.
How do you set auto puff drag S?
The Drag S comes with an Auto-draw mode, you can of course switch between using the button instead, as well as both at the same time by clicking the fire button 3 times.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
Is drag a good vape?
It feels high quality, opens easily, and clicks in place securely. The pods come with a much better plug than the flimsy one that came with the Vinci pods, and the magnets are super strong. Plus, the built-in mouthpiece is rounded this time around, and feels just like one of these large 510s made for DL vaping.
How do I set up VooPoo?
1:495:10How To Use The Voopoo Argus K Full Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipApparently slide in positive end first and then screw the base back onto. The device and screw theMoreApparently slide in positive end first and then screw the base back onto. The device and screw the base back onto the device to turn it on five clicks of the trigger. Button.
What temp should my VooPoo drag 2 be?
I found the vapor to be dense and very tasty at around 75-85W, which is also the range recommended by Voopoo. Temperature Control vaping is also great with the Drag 2, just as it was with the original.
What are the different modes on VooPoo drag?
Operating The VooPoo Drag S ModTurn On/ Off = Press fire button 5 times.Clear puff count = Press the fire button and '-' (down) button simultaneously.Lock / Unlock = Press the Fire button and '+' (up) button simultaneously.Mode Switching = quickly press fire button 3 times.More items...•
What is Drag 2 Mod?
What’s fascinating about the Drag 2 Mod by VOOPOO, aside from its good looks, is the advanced GENE.FIT chip that’s integrated into the device. It provides a full range of features, like temp control, TCR adjustments, the new FIT mode, and a variable wattage mode that will allow you to reach up to 177W. To control the device to the fullest ability, there is a large firing button, two adjustment buttons, and an intuitive OLED display screen. Combine all of this with its protection suite and a micro-USB port that supports charging and future firmware upgrades, and you’ve got yourself one of the impressive devices on the market.
Why does Drag 2 say "Check Atomizer"?
That could be the result of a few things, such as your tank or atomizer not being attached to the device, it not making a solid connection, or an issue with your coil not making a connection. Most times when you see this prompt, it will be that your tank isn’t attached or not tightened enough to make a solid enough connection.
How tall is the Voopoo Drag 2 mod?
One of its latest releases is the VOOPOO Drag 2 Mod, a fascinating device that features a remarkable chassis. It stands just 88.3mm tall, 51mm wide, and only 26.5mm in depth. It’s constructed of a superior zinc alloy material, giving it incredible durability and strengthens its external shell for an increased lifespan. Enhancing its appearance, the Drag 2 Mod comes included with a visually striking resin inlay design that’s available in Island, Flame, Aurora, Scarlet, Fire Cloud, Puzzle, Dawn, and Ink finishes. Positioned on the backside of the device there is a magnetized battery door cover which is capable of housing dual 18650 batteries, giving you longer durations between charges.
How to enter function menu?
How To Enter Function Menu: To enter the function menu, press the up and down adjustment buttons simultaneously.
Why does Drag 2 turn off?
There could be a couple of reasons why your Drag 2 Mod would turn off, and two of them primarily being that there is a sleep mode that activates after the device is inactive for 30 seconds or your batteries have depleted too low.
How to activate a Vape?
How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode. From there, you can adjust the wattage or rely on the automatically recommended wattage the device provides. Press and hold the fire button and your coil will vaporize the e-liquid.
How to install batteries in a mod?
How To Correctly Install The Batteries: Begin by turning the mod to its backside. On the back, there is a removable battery access door. Once you remove the access door, you will see two battery bays, each marked to indicate how to properly insert the batteries. If you aren’t sure of how to install the battery properly and need to learn more about battery safety, we recommend you do that before attempting to install the batteries.
How many watts does a Zelos vape have?
For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.
How to try a vape out for the first time?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
What happens if you set your coil incorrectly?
If set incorrectly this can lead to the coil burning out and that bad taste we were talking about earlier. To know what settings you need for your device you can find this information in a few places; in the manual or on the packaging, on the coil itself or coil packaging, or online from the manufactures/retailer where you purchased your device from.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
Why do you let your tank sit?
By letting your tank sit you are making sure the cotton is truly soaked with e-liquid to prevent a dry hit and potentially burning the coil. Prime your coil: A popular method for helping the e-liquid soak through is priming. This gives you extra reassurance that you won't get that nasty dry hit.
What does it mean when a device has no display screen?
Type 1) If your device has NO display screen and NO controls on the side to adjust the power output this means you have a fixed powered device - jump to Step 6. Type 2) If your device has a display screen and controls on the side to adjust the power this means you have a variable powered device - proceed to Step 5.
What is Ohm's law?
Essentially Ohm’s law is how you can calculate the ‘power’ of the current running through your vape and is essential to know when setting up your coils and battery, so you don’t overload and overheat your vape.
Why are mech mods dangerous?
One of the biggest dangers with mech mods is a higher potential to overheat, or for the batteries to explode due to poorly built or maintained circuitry. But there are ways you can combat this. Firstly, make sure your mod has proper ventilation.
What happens if you vape at a low ohm?
If you level too low, your vape could malfunction, overheat, or worse, explode.
How to put coils in RDA?
Next, put your coil into your RDA. You can do this by unscrewing the top of your RDA posts and putting the positive lead into one hole and the other in the negative. Alternatively, you can wrap the wire/leads around the screws before re-tightening , but be careful not to snap the leads with overzealous tightening. Important: the coils should not be touching anything, the cap, posts, whatever, as that could cause a short.
What is mechanical mod?
Mechanical mods are, essentially, a bit of a paradox. In essence, they’re the most basic type of vaping device on the market. Largely comprising of just a container with a battery inside, the fanciest the technology gets is the circuit connecting the base, the atomiser and the connector, completed when the firing button is pressed.
What is a mod in atomizers?
As I said before, a mod is fundamentally a tube with a battery inside. At one end, a switch, the other, a connection to attach an atomiser to, which complete a circuit when a firing pin is pressed. The choice lies in what materials you choose for the wire, metal, whether you want a dual or single coil build etc. but you can read more on that later.
How to connect battery to mech mod?
It’s all about making connections. Ensure your battery is well connected to the top and bottom pin when the firing button is pressed.
How to Enter the Fit Mode?
Press the firing Button For 3 times, enter the FIT Mode, ther are 3 types available, including Fit 1, Fit 2 and Fit 3, Press the firing button when "FIT 1" shows on screen, it will work, provides you Super Battery Set. The Fit 2 and Fit 3 setting is as well as the Fit 1.
What is fit mode?
What's Fit Mode? FIT is a mode that can protect tanks to the most with its intelligent matches of FIT 1/2/3, it will protect sub-ohm tanks from burnout (*Under normal and right operating conditions) Intelligent matches with tanks.
What is the Fit 2 and Fit 3 setting?
The Fit 2 and Fit 3 setting is as well as the Fit 1. 2. Fit 1: Super Battery Set. In this mode, you can see that battery is still full after a few hours using, in this way, you can use the drag 2 & mini all day long without charging! 3. Fit 2: Flavor Set. With this mode, you could taste more flavor than you think! 4.
Can you puff a cloud with Fit 3?
With Fit 3 mode, you can easily puff a big cloud without a hard deep breath. You can experience easily how to make vape tricks~
