how to set the settings to get more smoke on a vape

Simply adjust the power setting to a higher one. This increases the wattage that flows through the coil, and invariably the quantity of vaporized juice. Start on a low setting and steadily increase the power until the flavor starts to decline or the vapor becomes uncomfortable to inhale.

Full Answer

How to choose the right power settings for your vape?

As a general rule, more amount of VG means there will be more vapor and more PG means there will be more throat hit. Therefore to get big clouds, chose an e-liquid with 50/50 PG/VG ratio or a higher content of VG. However, it is not always about just VG. Sometimes even a little PG added to the e liquid can reduce the vapor.

How do I set up different vaping modes?

Consider a glass blunt if you don't like tobacco. Also, draw in using your cheeks, somewhat like you would suck a thick milkshake into your mouth using a straw. Hold the smoke in your mouth for a while and then exhale gently. With bongs, fill the …

How to make your vape more vape-friendly?

Oct 19, 2018 · Power Mode – Variable Wattage and Variable Voltage (VW/ VV): Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.

How do I control the temperature on my vape mod?

Feb 20, 2018 · Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank. If set incorrectly this can lead to the coil burning out and that bad taste we …

How do I get my vape to produce more smoke?

What setting should my vape be on?

Why does my vape not make much smoke?

How do I adjust my vape settings?

What temp and wattage should I vape at?

What is the best wattage to vape at?

Why is no smoke coming out my disposable vape?

How do I fix low resistance vape?

Why is my disposable vape barely hitting?

What does S and R mean on a vape?

What wattage gives the best flavor?

What do numbers on vape mean?

The Grinder and the grind

A lot of new smokers and vapers underestimate the importance of getting the grind consistency just right. Perfectly ground herb can be vaporized to its maximum potential, amplifying the flavor, potency and amount of vapor with every pull or drag you take.

The Vaporizer

Similar to your herb grinder, you cannot afford to cut corners while selecting a vaporizer. But the fact that there are virtually thousands of brands and models vying for your attention doesn’t make shopping for these any easier.

Desktop Vaporizer

Are you a stay-at-home smoker? Then a desktop vaporizer might be more appropriate. These devices are bulky but pack in more options than what you’d ever need. You can select from a whip-styled vaporizer, which is one of the first models that used convection or hot air to vaporize the herb.

Portable Vaporizer

If you are looking for a portable device, then you literally have your hands full. There are Vaporizing pens as well as more advanced devices that can work with e-liquids, dry herbs and concentrates.

Cleaning the vaporizer

Vaporizer maintenance is another underrated aspect of getting the most out of your vapor. We have seen vaporizers so densely clogged with resin and debris that a mouse could get trapped in it.

Getting thick smoke from your Joint or Bong

Newer smokers often struggle to produce consistent vapor clouds while using handheld smoking apparatus, like a joint or a bong. But there’s a trick to everything.

Need Help Finding the Right Vaporizer to Produce Plumes of Vapor that will Make all of Your Friends Jealous?

Reach out to us today. Our site is jam-packed with the very best products hand-selected or designed by our team of veteran smokers that enjoy herb and concentrates as much as you do.

Why is it so hot to vape?

Firstly, if you increase the power of your vape through higher wattages or lower resistance coils, the vapor's temperature increases and may become too hot to vape comfortably. Increasing the airflow allows for more fresh air to come in and cools the temperature of the vapor, making it more comfortable to inhale.

How to make vapor explode?

At the last moment, when you feel you’re almost out of air, tighten your lips.This will shoot out a powerful shot of air that will cause the released vapor to explode into a huge cloud.

What happens when air goes over coil?

When the air going over your coil increases, your device is able to produce vapor at a quicker pace. When the vapor production increases, the vapor is pushed out of the device quicker and therefore increases the rate at which the "old" vapor can be replaced with "new vapor". Voila!

How to open up your throat when you inhale?

Now (this may take some practice) exhale at a steady normal pace while simultaneously pushing your jaw out slightly. By pushing out your jaw, you allow your throat to open up so that vapor can easily escape.

How to get clouds?

Let me take you through a basic 6 step guide on a technique that should help you produce bigger clouds. Exhale and empty your lungs completely. Lean forward slightly and exhale again to get rid of excess air in your lungs.

What is the difference between PG and VG?

PG is what provides the flavour and throat hit, whilst VG provides the vapor. Therefore, if your intention is purely to increase vapor production and produce bigger clouds, then you need an e-juice that’s high in VG. Juices' that contain a 100% VG ratio are available, and will be able to produce large, thick clouds.

How to get rid of air in your lungs?

Lean forward slightly and exhale again to get rid of excess air in your lungs.

What is the best vape tank for clouds?

What’s the best type of vape tank for cloud vaping? While smaller vape tanks like the Innokin Zenith D22 are great for everyday, and more discreet use, to get really big clouds, you’re going to need a low sub ohm tank with a low resistance coil. One of my favourite tanks for clouds is the Falcon II from HorizonTech.

How many watts does a Geekvape Obelisk 200 vape have?

Although surprisingly compact, the device is powered by two 18650 and can push up to 200 watts of power. It’s also paired with the excellent Zeus tank.

How does airflow affect vapour?

The airflow over your coil cools down the vapour, and this makes it condense into liquid droplets. So the more airflow you have, the more condensation there is and the more visible “vapour” (i.e. aerosol) you produce. The extra airflow also “dilutes” the vapour with more air, which has the effect of puffing it out.

Why are mesh coils so popular?

The “fan” mesh coils in the Falcon take the basic formula but improve it by adding a conical shape, which concentrates the vapour before it reaches the mouthpiece. This boosts the flavour you get as well as the improvements to the vapour production that come with any mesh design.

How does e-liquid prevent vapour from being created?

This effectively prevents new vapour from being created if your airflow is completely closed off (or close to it ).

Where to start airflow coil?

Start on the maximum airflow setting and a low wattage, towards the bottom end of the range suggested on your coil.

Can you use a sub ohm tank for cloud chasing?

Although you should use a sub-ohm tank (which can all cope with higher power) for cloud-chasing, not all of the coils in your tank are ra ted for the same power settings . The suggested settings are usually printed on the coil itself, and these are a good guide to the power you can put through them.

What coils are used in power mode?

Pretty much all coils need to use with this mode, you can use Kanthal, stainless steel (SS), and nichrome ( nickel -chrome) coils. most of readily made coils are made out of Kanthal Wire, which is why power mode tends to be oh-so-popular among users of different expertise levels.

What is power mode?

Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.

What is bypass mode?

Bypass mode gives you the experience of raw power of your battery to heat your coils. Here you can build your coils at lower resistances than is normally accepted by power or temperature control mode, meaning that the power of the hit will be determined by the sheer state of you battery and the resistance of the atomizer.

Can you set a temperature control?

You can set personalized power or temperature control settings for your convenience. On select devices, if you have a few different power or temperature settings that you normally use, you can set these as memory settings to you can easily scroll through them to change from one setting to another.

Do mods support coils?

Here it’s better to have basic understanding of coils, and it’s always advised to check your device carefully, because some mods support particular coils for TC mode, while others state clearly that they support more than one type, which you’ll find in the settings as TC-Ni, TC- Ti or TC ( NI, Ti ).

How to try a vape out for the first time?

To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.

When to charge vape?

For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.

How many watts does a Zelos vape have?

For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.

What are the different types of vapes?

There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.

What happens if you set your coil incorrectly?

If set incorrectly this can lead to the coil burning out and that bad taste we were talking about earlier. To know what settings you need for your device you can find this information in a few places; in the manual or on the packaging, on the coil itself or coil packaging, or online from the manufactures/retailer where you purchased your device from.

How long should I let my pod sit before using it?

This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.

Why is it better to use a large vape tank?

Indeed, it is the larger, the better since producing dense clouds consumes more e-juice. And so to avoid constant refilling or the embarrassment of having your device run out of e-juice while you are vaping, it is best to opt for large capacity tanks. This is because they are the best vape tanks for getting maximum clouds.

How to increase wattage of e-liquid?

Increasing the power of your device enhances its capacity to vaporize e-liquids. Simply adjust the power setting to a higher one. This increases the wattage that flows through the coil, and invariably the quantity of vaporized juice. Start on a low setting and steadily increase the power until the flavor starts to decline or the vapor becomes uncomfortable to inhale. That is the point where you should stop. Moving beyond that might harm your device.

What is a Vaporesso Skrr tank?

Vaporesso Skrr Tank: This sub-ohm tank sports great features; an 8ml e juice capacity and four airflow slots at the bottom. However, the best part is the QF coil system that provides excellent flow for e-juices with high VG content and thick, rich clouds. With this type of tank, dense clouds are not the only thing you blow; the mesh coils also allow you to blow soft, aromatic clouds too.

What is the beauty of vaping?

The ‘beauty’ of vaping for most vapers lies in the thick, aromatic clouds of vapor that are created. It most cases, only specialized vape devices (sub-ohm) produce such clouds, hence the shift towards such devices. There are other ways around producing such clouds especially if you do not want those specialized devices.

What is the firing rate of Vaporesso Luxe?

It has a rapid stable and safe firing rate of 0.0015. This allows for the quick heating that brings you clouds that are as dense as they are aromatic. Its OMNI board turns off the charging when you are vaping and vice versa while its quick charging feature shortens the charging time and makes it readily available for use.

Why do RDA tanks have dense clouds?

The reason why RDA, RTA, and sub-0hm vaping tanks can produce dense clouds is because of the amount of current that passes through the coils. This is the principle behind adjusting the power settings of your device for maximum clouds. Increasing the power of your device enhances its capacity to vaporize e-liquids.

How to use a smok mod?

How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.

What mode to use for SMOK coil?

If you’re just running the SMOK coil that came with the kit, just stick to wattage mode, as that is designed for standard power modes.

How many times do you wake a Smok mod?

Once you’ve unboxed your SMOK mod, and you have installed the correct batteries in the right orientation, simply click the fire bar FIVE times to wake the mod. There will be a short boot-up time, where you see the SMOK logo, and then, once all the software is booted, the settings menu will appear on the display.

What are the different vaping modes?

In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.

What is Trailblazer vape juice?

But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. It’s rich, sumptuous, and very much an all-day vape and personal favorite of mine. I highly recommend this juice.

How to set wattage on a tank?

To set the desired wattage (or power), simply toggle the buttons up and down until you find the sweet spot for your tank.

How to change the color of the fire bar?

From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.

How to find the right setting for a vape?

The process of finding the right setting is the same – start low and adjust upwards as needed – but the result is a more consistently flavourful vape.

What is the best way to get more flavour in a vape?

For flavour chasers, closing off the airflow is the best approach. This produces a denser, warmer vape that carries a lot more flavour. Adjustable airflow systems on atomizers make this easy to achieve.

Why is it better to use a sub ohm tank or a smaller bore coil?

The crucial factor is the bore of the atomizer head. The trend towards larger bore coils leads to more airflow through the coil and can reduce the flavour as a result. So in most cases, it’s better to choose a sub-ohm tank with a smaller bore coil, if possible. These coils (and the tanks using them) are often advertised as supporting mouth-to-lung hits.

How long should you leave atomizer heads?

Leaving your atomizer heads until the wicks are completely dry is important (24 hours is usually enough), so it’s a good idea to have another head to use while it’s drying. If you use rebuildable atomizers, you can change your wick easily, so doing it with every change of flavour is more feasible.

Why is PG better than VG?

The typical advice in past years was that moving to higher-PG liquids is better for flavour. This is simply because VG imparts a slight flavour onto your juice, while PG doesn’t. It makes sense, and indeed is also why PG is used as a carrier for food flavourings rather the VG.

Why do different juices come out at different temperatures?

This is because specific flavourings vaporize at different temperatures, and your setting (in combination with your coil’s resistance) determines how hot your coil gets. For flavour-chasers, this is the major benefit of having a variable voltage/variable wattage device.

Where are the airflow holes on a coil?

As well as the amount of airflow, the position of the airflow holes in the coils is also important. The airflow holes on most atomizers open up at the side of your coil, and although this can work well, there is a better layout.

What is temp control vaping?

Temp Control Vaping: With temp control vaping, you can lock the maximum temperature you vape at. This ensures you never go over and, therefore, stay well with the comfort zone of your coils.

What is Trailblazer vape juice?

But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. It’s rich, sumptuous, and very much an all-day vape and personal favorite of mine. I highly recommend this juice.

What is the wattage of a box mod?

The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.

What happens if you prime a tank and load it on a mod?

If you prime your coil and load the tank onto a mod and then crank it up to 200W, one thing will happen: you’ll burn the coil out instantly ( and likely cough your guts up).

Do box mods run batteries?

Box mods also run multiple 18650 cells too, which means battery life is MILES better than it is on pod mods like the JUUL or single-cell mech mods like VGOD Mech Pro.

Do box mods come with chipsets?

This is one area that is pretty simple. Modern box mods 99.9% of the time come with vaping chipsets (like the one you have inside your phone).

Can you set e juice to low?

You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.