Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top.
Full Answer
How to unscrew a stuck vape tank?
If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
How do you get a vape out of a tight spot?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
How do you remove the glass from a vape tank?
To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket. Many modern vape tanks have coils that screw into both the top and bottom hardware.
How to fix a jammed vape tank?
However, if you are having trouble detaching the tank from your device, you need to unstick the tank. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
How do you unscrew a vape cap?
0:000:44How to Loosen a Stuck Cap - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe end of the cap. And one of the fins. And so if you just stick the knife blade and you can kindMoreThe end of the cap. And one of the fins. And so if you just stick the knife blade and you can kind of see here. And just give the knife a little tip. And it'll pry and pop it right off.
Why can't I unscrew my vape tank?
All you need is to run the vape tank under falling hot water for some minutes, two to five at most. If you're using a mechanical mod (mech mod) remove the batteries and submerge your mod in a mixture of hot water and vinegar. Now, don't mistake “hot water” for boiling water. The latter can break your vape tank.
Which way do you unscrew a vape coil?
1:575:16Vape Tutorial: How To Change Coils On Vape Tanks & ClearomizersYouTubeStart of suggested clipEnd of suggested clipWith everything lined up apply pressure to the top cap and begin twisting in a counterclockwiseMoreWith everything lined up apply pressure to the top cap and begin twisting in a counterclockwise motion. The coil is located at the base of the chimney to remove the coil.
How do you screw a vape coil?
0:522:20How To Change Your VAPE Coils! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you need to do is squeeze the bottle. First then insert it tilt it over and what you'll do isMoreAll you need to do is squeeze the bottle. First then insert it tilt it over and what you'll do is suck the juice back into the bottle as you're releasing it even if it's not a lot of juice.
How do I open my vape?
0:110:58How To: Open a Tight Vape Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipI had a hard time opening this until I got two rubber bands. And just wrapped them on the two partsMoreI had a hard time opening this until I got two rubber bands. And just wrapped them on the two parts top and bottom there you have to twist and then you twist opposite directions obviously.
How do you open a vape bottle?
To open a childproof e-liquid bottle, grip the bottle with one hand, then push the cap downwards and twist anticlockwise. It might take a bit more force than you'd think! You might need to repeat the downward push/twist motion a couple of times to finally get the cap loose.
How do you remove a Smok coil?
1:215:44How to change coils on SMOK Alien TFV8 TFV12 Series Vape Tanks + ...YouTubeStart of suggested clipEnd of suggested clipWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If youMoreWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise. If you accidentally remove the bottom plate of the atomizer.
How do you remove the coil from a Smok tank?
Step 1 Coil. Unscrew the tank from the mod. ... Make sure there is no vape juice in the tank. You may dispose of any excess juice by pouring it into the trash. ... Disconnect the filter and the atomizer from the bubble tank. ... Unscrew the coil from the filter. ... Throw the old coil away. ... Screw the new coil into the filter.
How do you remove a stuck vape glass?
3:004:45Removing Glass From a Sticky Subtank - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can twist it and your glass should come off what that does just you're playing with thermalMoreYou can twist it and your glass should come off what that does just you're playing with thermal expansion. And contraction. Basically the glass is gonna be warmer.
How long should a coil last in a vape?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
Why does vape taste burnt?
If you vape at a wattage that's too high for you coil head, your e-liquid will vaporise too quickly. When this happens, the wick can't re-saturate quickly enough, so the coil ends up burning the wick which causes that unpleasant burnt taste.
What happens if you dont change vape coil?
What happens if I don't change it? If you don't change your coil when it needs it, your vape juice will start to taste burnt. If it wears out, it will start to leak – you'll usually have changed it long before then.
How to disassemble a vape tank?
In most cases, disassembling a vape tank is a simple task that you can perform in a matter of seconds. Simply grip the tank’s top hardware and bottom hardware in opposite hands and twist counterclockwise to loosen the threads. After you’ve unscrewed the tank, you’ll have two halves: the bottom hardware with the atomizer coil attached and ...
How to remove glass from a vape?
To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket. Many modern vape tanks have coils that screw into both the top and bottom hardware.
How to remove stuck glass from a tank?
Just get a length of dental floss and place it in the seam between the glass and the tank’s hardware. Hold the floss tight while wrapping it around the tank repeatedly.
Why is my vape tank stubborn?
In some cases, a vape tank can simply be stubborn because the machining of the threads isn’t so good. That could be a sign that you’ve gotten a counterfeit tank, but it’s more likely just a case of subpar workmanship. Some vape manufacturers are better than others.
Why is my vape tank not moving?
One of the problems you might encounter when disassembling a vape tank is that the glass can sometimes be extremely stubborn. No matter how much you might wiggle the glass, it simply refuses to move. You don’t want to use tools or apply too much force in this case, because you’ll break the glass.
How to disassemble a Uwell Crown 3?
To disassemble the Uwell Crown 3 or another tank with a locking chimney, remove the tank’s top and bottom hardware. Take the key included with the tank and place it in the chimney under the tank’s top hardware. The key locks into the matching notches in the chimney. Twist the key to unlock the tank.
Why is my vape tank stuck?
A stuck vape tank is caused by an increased friction between the rubber rings and the part where the tank unscrews. There a few tips to prevent this from happening. Regularly checking the O-rings. Old O-rings can become cracked, which means they can leak out e-juice. When the e-juice dries, it gets thick and sticky which will make your tank get ...
How to unscrew a tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
What happens when you top up e-liquid?
Be careful when you top up your e-liquid: All vapers have made a sticky mess when topping up their e-liquid. If the e-juice gets between your O-rings, the glass and the tank, it makes them sticky and difficult to move. So, be careful when topping up!
How long to put a scuba diving tank in freezer?
Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen.
Can you vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
How to stop a vape from getting stuck?
How to Stop Your Vape Tank From Getting Stuck. Make sure you are only tightening your tank enough to prevent leakage, as overtightening can lead to stuck parts. Having to retighten a tank is better than having to replace a setup. If parts of your device end up permanently broken and you need to purchase a new tank, ...
What happens when you get stuck in vape setup?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device. ...
Why is my vape tank jammed?
Vape Tank Jam. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
What happens if you unscrew the tank?
If you are having trouble unscrewing the tank to replace e-liquid, you are dealing with a tank jam. However, if you are having trouble detaching the tank from your device, you need to unstick the tank.
What to do if your tank is stuck?
If your tank is truly stuck, prepare for some more fragile pieces to break in the process of fixing your tank. If you are still unable to fix the stuck tank, you may need to decide between getting an entirely new device or breaking a portion to get them apart.
Can you remove a tank stuck to a mod?
In some cases, your tank may simply be stuck to your device. This is a bit riskier since a botched fix would require more than simply a replacement tank. When attempting to remove a tank stuck to a mod, take care to avoid injuring the device or yourself via the battery.
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
What is the sticky pad on my mouse pad?
The back of your mousepad is covered in a sticky foam that keeps it from sliding around on your desk when you move the mouse. This sticky pad could be exactly what you need to get a good grip on the stuck part of your tank and finally twist that sucker apart.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
Do you need a jar opener for vaping?
Don't have a jar opener? That's okay. Even more, homes have at least one pair of (possibly forgotten) rubber gloves. Check under the kitchen and bathroom sinks, in the utility drawers, around the laundry area, and in the mop bucket if you're not sure. These are thicker than jar opener pads, but give your hands the absolute bonus when it comes to pain-free friction applied to twist that vape tank.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
