#1 Keep your mod clean #2 Clean your tank regularly #3 Check and replace your coil regularly
Full Answer
Are mechanical mods safe for vape batteries?
But be warned, the use of a mechanical mod comes at a price in terms of potential danger and battery safety is paramount if you want to go down the mechanical mod road. So today we explore the world of mechanical mods and offer some serious advice on mechanical mod vape battery safety. But first... What Is A Mechanical Mod?
Is it safe to use a full mech vape?
One of the most prevalent issues preventing people from using a full mech vape is safety, particularly battery explosion or battery venting. Battery venting can occur whether you are using a regulated mod or a full mechanical vape mod.
What is a mechanical vape mod?
A mechanical vape mod is an unregulated device. In simple terms it's basically an atomizer connected to a battery with no chip in between to regulate the voltage and the wattage. On an unregulated mod when the button is fired it completes a circuit causing the current to flow through the coil.
Which vape mods have the best energy storage?
Battery tech, as energy storage and efficacy evolves, full mech mods benefit the most from battery tech, the downside is full mech vape mods are heavily reliant to battery technology.
How do you maintain a mechanical mod?
The best way we find cleaning your mech mod on the outside is fairly easy. We recommend using alcohol wipes to get the dirt and grime off of the outer body. If your mechanical mod has a coating on it, this tends to be the best way since this will not damage any layers.
Are mechanical mods safe?
Are Mechanical Mods Safe? Mechanical mods are generally safe if used correctly. However, many of the faults that do happen are as a result of the battery. As mentioned, mechanical mods do not have any circuit boards, so there is nothing to keep the device from fully defecting if there is a malfunction.
How do you maintain a Mod?
Cleaning Your Pod Mod Soak it in cleaning alcohol for a few minutes, dry and see the results for yourself. This process should rub off any gunk that has built up in the connecting areas of your device. For an even more thorough clean use a cotton bud or swab to clean out stubborn grime.
What's a safe Ohm for Mech Mod?
For a parallel mechanical mod with dual batteries, each rated at 20A, the lowest safe resistance is 0.11ohm. But to ensure that you remain safe, build a bit higher; 0.12ohm would be better to ensure that you're vaping safely within the limits of your batteries and not stressing them.
Is full Mech vape safe?
One of the most prevalent issues preventing people from using a full mech vape is safety, particularly battery explosion or battery venting. Battery venting can occur whether you are using a regulated mod or a full mechanical vape mod.
What wattage do Mech Mods vape at?
At 0.40 ohm, you will take 176 watts in the mouth and at 0.50, you will be around 141 watts. If you are looking for a Mech vaping around 100 watts, then you should aim for a resistance of 0.71 ohm. And beware, we are talking about the stacked.
How long should a vape mod last?
It's all dependent on so many different factors which make it a challenge to try and work out. With that being said, however, there is a fair amount of evidence to suggest that the average lifespan of a vaping device as a collective set of pieces is around about six months.
How do I take care of my vape?
Looking After Your E-Cig & Vape BatteriesClean the Battery Contacts Regularly.Keep Batteries Out of Sunlight & Extreme Temperatures.Mark Your Batteries So You Know When To Replace.Don't Overcharge Your Batteries.Store Your E-Cig Batteries Carefully.Turn Off When not In Use (Not Applicable to Cigalike Kits)More items...
How do I know if my vape mod is bad?
If the wicking burns, you'll know it. Your juice will develop a really horrible burnt taste. If that happens, the coil must be replaced. Even with full juice, your wicking can burn if you turn up the power of your mod higher than the coil is meant to withstand.
What wattage should I vape at 0.5 ohm?
For example, a 0.5 ohm coil will vape best at 15 watts up to 50 watts. Another place you can look to find out the appropriate wattage range is on the coil itself.
What wattage should I vape at 0.2 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
Are vape mods safe?
As far as we know, high-quality vape juice, used with a well-designed, high-end vape pen or mod, is safe.
What is mechanical mod?
A mechanical mod is a vaping mod that will deliver battery power to an atomizer without regulating the current. In other words, a mechanical mod does not have safety features built-in. The power that you get is equivalent to the voltage of your battery, and there are no wattage or voltage adjustments that can be made.
What's the difference between mechanical and regulated mods?
The lower the voltage, the higher the output of wattage and the more amount of battery being used to heat the coil. Regulated mods, on the other hand, can be manually adjusted to your desired wattage. That's why it's important to always have your wattage set within the coil's recommended limits.
Are Box mods safe?
Are box mods safe? Let's start by debunking the myth that mods are more dangerous than other types of vaping devices. In the right hands, they are completely safe to use and can enhance the vaping experience significantly.
1. How to clean your mech mod (inside and out)
The best way we find cleaning your mech mod on the outside is fairly easy. We recommend using alcohol wipes to get the dirt and grime off of the outer body. If your mechanical mod has a coating on it, this tends to be the best way since this will not damage any layers.
2. How to clean your mechanical mod contacts
When cleaning the contacts on your mechanical mod, extreme precaution needs to be taken, as this determine most of your performance. If these contacts are damaged in any way, it may compromise optimal performance. We recommend using a reputable metal polish, such as Mother’s to polish many different contact materials.
3. How to clean copper patina on your mechanical mod
Cleaning copper patina goes into the technique of prepping and polishing properly. If your mechanical mod has bare copper parts and they seem to look like a penny after using it for a while, this is due to the fact that constant contact with your hands and the air around you creates that oxidized layer.
4. How to clean your Subtank, RDA, RDTA
When cleaning a normal subtank, the best way is to disassemble all large parts, which usually involves unscrewing the base, remove your glass, remove your coil, and rinse every part with warm water. DO NOT USE SOAP. Soap can leave residue behind which can mix in with your ejuice which is not pleasant.
Conclusion
We at VGOD always strive to help our community and make sure knowledge is passed on correctly so you can get the most out of your devices. Keep those mechanical mods clean, keep your RDA/RDTAs clean, and keep vaping!
What is parallel vape?
A parallel vape device will allow you to use coils of much lower resistance, this will result in a more powerful vape, boosting vapour production. A series vape device, on the other hand, will require you to use higher resistance coils, but the device will have a much faster ramp-up.
Is it safe to build a coil with low resistance?
As aforementioned, the danger of building a coil with too low a resistance relates to the relationship between the battery and the coil. The rule of thumb is, the higher the Ohm rating the less Amps from the battery are needed. This is where Ohm’s Law really comes into play, as it’s used to confirm that the amount of energy discharged from your battery is safe.
Can you use a series or parallel vape?
As you can see from the above calculations, using either a Series or Parallel unregulated vape device will greatly change the type of vape you experience. A parallel vape device will allow you to use coils of much lower resistance, this will result in a more powerful vape, boosting vapour production. A series vape device, on the other hand, will require you to use higher resistance coils, but the device will have a much faster ramp-up.
How much does a safety fuse cost for a mechanical mod?
To that end, it is definitely recommended that you get a safety fuse for your mechanical mod. Phil Busardo (from TasteYourJuice.com) recommends the Two Cents for Safety fuse, which you can pick up for around $6 and will shut down your battery if it senses a short.
Why is the battery negative on my e-cigarette?
Because the outer casing of a battery is negatively charged, this prevents a short circuit if the non-conductive cover around the outside of it becomes damaged. If you’d inverted your battery, a short would occur in the event of a damaged battery cover, and you’d be opening yourself up to all of the associated risks.
Is a mechanical mod dangerous?
Mechanical mods aren’t dangerous, they just have more potential to be dangerous than any other mod or beginner-level e-cig if you don’t know what you’re doing. It’s easy to stay safe with a mech mod, but don’t rush ahead if you’re happy vaping a VV/VW mod or an eGo; wait until you’re confident with the technology and safety aspects before giving mechanical a try.
What is a mechanical vape mod?
What is a mechanical mod? A mechanical vape mod is an unregulated device. In simple terms it's basically an atomizer connected to a battery with no chip in between to regulate the voltage and the wattage. On an unregulated mod when the button is fired it completes a circuit causing the current to flow through the coil.
Why vent holes in mechanical mods?
This pressure can cause the ends of your mod to blow off and that's why vent holes in your mechanical mod are so important. Vent holes allow gases from a venting battery to escape so the pressure wont build to deadly levels and explode .
What do the numbers mean on a vape battery?
The numbers are actually a set of 3 different numbers that describe the battery with each set of digits having a very specific meaning.
What is a vape battery?
Understanding Vape Batteries. Vape batteries come with two different types of tops; flat top batteries and button top batteries. As the names suggest a flat top battery has a top that is flat or flush while a button top battery has a button that extends out from the top of the battery.
Why does my mod fail?
High Wattage - if the wattage of the battery it too high heat can trigger thermal runaway inside the battery. Exposing your mod to extreme temperature - if your mechanical mod is left in the car on a hot day or near a stove or fire in your home this heat can cause the battery to fail.
Is it dangerous to vent a battery?
In the event the battery is damaged gases and liquid can vent from both the puncture site and the ends of the battery. While battery venting itself is dangerous if this occurs inside a device like a mechanical mod the results can be deadly.
Is IMR good for vaping?
The other feature of IMR batteries that make them ideal for vaping and mechanical mod vaping is that they have a higher draw. This essentially means they have a higher current to flow. While this is good for sub ohm vaping the downside is that the batteries will drain faster than other types of batteries.
What is the downside of a full mech mod?
Battery tech, as energy storage and efficacy evolves, full mech mods benefit the most from battery tech, the downside is full mech vape mods are heavily reliant to battery technology. A modder can make his mod with as much less of a voltage drop as possible by using quality highly conductive materials but the mod will always be limited by the battery.
Do mods have chips?
In regulated mods, the chip will detect this and apply measures to prevent you from exceeding the limit. In full mechanical mods, there is no chip to do this for you.
What is a mechanical mod?
Mechanical Mods or “Mech Mods” are one of the oldest and most simple ways to vape. However, they come with a few caveats for becoming a proficient user….
What is a mech mod built with?
Some are built with a potentiometer to control the power. The most popular of these is probably the Hexohm. Unregulated mods are a great way to “test” the idea of a mech mod. However, it is still important to follow normal safety guidelines.
What are box style mods made of?
Box style mechanical mods have lost popularity, but many companies still specialize in making them. They can be made from wood, Ultem, Delrin, and even metal. The appeal of a box-style mech is the battery options. Box style mechs can have a single battery, dual, or even quad battery designs.
What is an unregulated mod?
Unregulated mods are in a league of their own. While your standard mech doesn’t have any safety features in place, unregulated mods usually do. Just like a mech, you hit a button and the mod will immediately fire. The difference is there is circuitry built-in.
What is regulated device?
A regulated device will ensure your ohm load is in the safest range, and there are no hard shorts in your atomizer. Also important is the type of batteries to use. You only want to use a high amperage battery, and you need to buy from a trusted source and company.
Why are Kennedy mods so expensive?
I know clones are cheaper. But that could easily come at the cost of your safety. The reason a Kennedy Mod costs so much is the superior crafting and quality parts. They are handmade and tested using calibrated machinery. Saving some cash is not worth the risk of your safety.
Can you use a subohm tank with a mechanical mod?
It’s also a good rule of thumb to not use a sub-ohm tank with a mechanical mod. You want a fixed, protruding 510 pin on the bottom of your atomizer. Subohm tanks use a floating style pin, and this can cause a short in your mech mod.
What to do if your vape battery is cut?
If there is a cut, knick, or any other sort of damage to your vaping battery’s wrapper, I recommend buying a new battery, especially if you like the idea of keeping your hands and fingers. There are some vapers who prefer re-wrapping their damaged batteries. If you are an experienced vaper and feel comfortable re-wrapping your batteries that is fine as well, but please be very careful. Be sure to keep battery wrappers clean, and when you’re not using a battery, be sure to store it in a vape battery case.
What is an unregulated tube mod?
In vaping, “unregulated tube mods", also known as mechanical mods or tube mods, have no circuitry or safety protections. They are simply metal tubes into which a vaping battery is inserted. This means you should take extra safety precautions when using a mechanical mod. Common vape devices we see that are considered “unregulated mechanical tube mods" are single 18650 tube mods and single 26650 tube mods. There are unregulated dual-battery boxes, but those require an even more detailed explanation, so we’ll deal with them in a future post.