how to reset voopoo vape

by Jasmin Robel Published 2 years ago Updated 1 year ago

Part of a video titled How To Do A Factory Reset on Your IQC Vaporizer - YouTube

0:00

0:31

Once the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.

How do I reset my Voopoo drag vape?

You can reset your daily puff number by pressing fire and down simultaneously. It locks the device (you cannot fire it or change its wattage when it is locked). When you press all three buttons simultaneously, you enter the clock interface (you must keep pressing fire for 2 seconds to exit).Nov 26, 2021

How do I reset my Voopoo pro?

Argus Pro – Functions

Turn the device on – 5 Clicks of the fire button.
Adjust Wattage – Press/hold the + or – buttons.
Lock Device – Press and hold the fire button and + button.
Reset Puff Counter – Press and hold the fire button and – button.
Change Modes – Press the fire button 3 times quickly.

Dec 13, 2020

How do you reset puff Voopoo?

The puff counter data can be reset by holding the power/fire button and the down/- buttons simultaneously. The Drag 3 runs on Voopoo's Gene Fan 2.0 chip and fires up to 177Watts. There are 2 main modes that can be changed by fast clicking the fire/power button 3 times.Feb 11, 2021

Why is my Voopoo not working?

If the Voopoo Find S doesn't work when you press the fire button, the most likely cause is that the device is turned off. Press the five button five times quickly to turn it back on. If the device still isn't working, an error message should appear on the screen.

How do I change the settings on my Voopoo vape?

Changing modes: Tap the fire button three times to change from 'RBA' to 'smart' modes. The DRAG S also lets you change between drag and button tap firing. Locking & unlocking the device: Hold the up button and power button at the same time.Jul 29, 2020

Why is my drag vape not working?

The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO DRAG X is shipped in a locked position to prevent accidentally turning on during shipment.

How do you reset the puff on Voopoo drag 3?

Changing The Display – Press and hold both variable wattage buttons to access the display menu. Then use the adjustment buttons to select which display orientation you want and hold the firing button to confirm. Reset Puff Counter – Hold the firing button and bottom variable wattage button.Jun 29, 2021

How do you clear the puff counter on Voopoo gene?

- Clear puff count = Press the fire button and '-' (down) button simultaneously. - Lock / Unlock = Press the Fire button and '+' (up) button simultaneously.

How do you reset the puff counter on Voopoo x217?

When in any mode, hold the + button and at the same time also hold the – button to enter the interface of the mode's menu. If it is resetting the puffs, hold down + and fire button simultaneously until you see the display flashing. From there, you can be able to change to display either puff counter or seconds.Aug 26, 2021

How do you unlock a Voopoo vape?

Part of a video titled Voopoo Vmate 200W - How to Lock / Unlock the Fire Button - YouTube

0:10

0:47

And maybe it happened while it was in your pocket or something like that and you don't know how toMoreAnd maybe it happened while it was in your pocket or something like that and you don't know how to unlock it it is done like this hold down the UP button and the fire button at the same time.

Can you hit Voopoo drag while charging?

Battery Life and Performance

The Drag S, on the other hand, is more compact, has a decent battery capacity, and comes with USB Type-C charging, which means you can charge it up from depleted to full in about an hour. Plus you can also uses while it is charging.

Why is my Voopoo Argus not working?

If your Voopoo Argus Air isn't vaping, the first thing that you should do is make sure the device isn't turned off. Press the fire button five times. If that doesn't resolve the issue, connect the Argus Air to your computer until the battery is fully charged, and then try vaping again.

Can Not Recognize The Atomizers

the issue is the mod keeps asking ” New Coil (+)” or ” Old Coil (-)”, the vaping mod cannot detect the atomizer due to the short circuit of your tank or mod.

Coil Burnt Issue

If the coil burnt out within a short time, follows might be the causes to the issue: 1. Did not prime the coil before vaping. 2. The e-juice you fill is not enough. 3. Improper vaping settings of power. 4.you vape too frequently.

Why does my vape taste burnt?

If you find your vape tasting burnt, its possible you are using an e-liquid with a very high VG level and that is too thick to saturate the wicks in the coils, leading to burning. Try using e-liquid that has a lower VG level (and higher PG level) to improve the flow of your e-liquid.

Can you fill a pod with e-liquid?

A) Not enough e-liquid in pod: Check and make sure that the pod is filled with e-liquid. Its a good idea to re-fill your pod before it becomes completely empty, as the last small amounts of e-liquid will have a difficult time getting to the coil to saturate the wicks.

What coils does Voopoo use?

The Voopoo Argus and Argus Pro both work with Voopoo PNP coils. Voopoo recommends a minimum coil resistance of 0.3 ohm for the standard Argus, though, while the Argus Pro supports coil resistances as low at 0.15 ohm. The Voopoo Argus has a maximum operational power of 40 watts, and the Argus Pro has a maximum power of 80 watts.

Why does my voopoo argus gurgle?

Voopoo Argus Gurgling. If your Voopoo Argus gurgles during use, you’re inhaling with too much air pressure and are overwhelming the pod’s ability to manage airflow. The excess air pressure is drawing e-liquid into the pod’s atomizer coil assembly and flooding the coil.

How to charge a USB C?

To charge the device, connect one end of the included USB-C charging cable to the device, and connect the other end to one of your computer’s USB ports. The device’s display will tell you when charging is complete.

How does vaping work?

Vaping devices use the power of your inhale to pull e-liquid to the heating coils and mix with the vapour. If you pull very long and hard on the device it is possible for some e-liquid to be pulled into the airflow chambers. For all types of vaping, slow long drags are recommended.

Why does my e-liquid leak?

Over heating the device can cause the e-liquid to expand pushing it out through the coil and out the mouthpiece, causing it to le ak. Temperatures raising expand the size of the molecules of the e-liquid, and if your tank is full to begin with, your e-liquid will have no where to go but to leak out of the pod.

Vape-FAQ.com